Eigenstrain

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In continuum mechanics an eigenstrain is any mechanical deformation in a material that is not caused by an external mechanical stress, with thermal expansion often given as a familiar example. The term was coined in the 1970s by Toshio Mura, who worked extensively on generalizing their mathematical treatment. A non-uniform distribution of eigenstrains in a material (e.g., in a composite material) leads to corresponding eigenstresses, which affect the mechanical properties of the material.

In continuum mechanics an eigenstrain is any mechanical deformation in a material that is not caused by an external mechanical stress, with thermal expansion often given as a familiar example. The term was coined in the 1970s by Toshio Mura, who worked extensively on generalizing their mathematical treatment. A non-uniform distribution of eigenstrains in a material (e.g., in a composite material) leads to corresponding eigenstresses, which affect the mechanical properties of the material. \epsilon_{ij} = e_{ij} + \epsilon_{ij}^* where i and j indicate the directional components in 3 dimensions in Einstein notation. Another assumption of linear elasticity is that the stress \sigma can be linearly related to the elastic strain e and the stiffness C_{ijkl} by Hooke's Law: \sigma_{ij} = C_{ijkl} e_{kl} In this form, the eigenstrain is not in the equation for stress, hence the term "stress-free strain". However, a non-uniform distribution of eigenstrain alone will cause elastic strains to form in response, and therefore a corresponding elastic stress. When performing these calculations, closed-form expressions for e (and thus, the total stress and strain fields) can only be found for specific geometries of the distribution of \epsilon^* . \epsilon_{ij} = S_{ijkl} \epsilon_{kl}^* \sigma_{ij} = C_{ijkl}(\epsilon_{ij} - \epsilon_{kl}^*) Where S is the Eshelby Tensor, whose value for each component is determined only by the geometry of the ellipsoid. The solution demonstrates that the total strain and stress state within the inclusion \Omega_0 are uniform. Outside of \Omega_0 , the stress decays towards zero with increasing distance away from the inclusion. In the general case, the resulting stresses and strains may be asymmetric, and due to the asymmetry of S , the eigenstrain may not be coaxial with the total strain.

Inverse problem

Eigenstrains and the residual stresses that accompany them are difficult to measure (see:Residual stress). Engineers can usually only acquire partial information about the eigenstrain distribution in a material. Methods to fully map out the eigenstrain, called the inverse problem of eigenstrain, are an active area of research. Understanding the total residual stress state, based on knowledge of the eigenstrains, informs the design process in many fields.

Applications

Structural engineering

Residual stresses, e.g. introduced by manufacturing processes or by welding of structural members, reflect the eigenstrain state of the material. This can be unintentional or by design, e.g. shot peening. In either case, the final stress state can affect the fatigue, wear, and corrosion behavior of structural components. Eigenstrain analysis is one way to model these residual stresses.

Composite materials

Since composite materials have large variations in the thermal and mechanical properties of their components, eigenstrains are particularly relevant to their study. Local stresses and strains can cause decohesion between composite phases or cracking in the matrix. These may be driven by changes in temperature, moisture content, piezoelectric effects, or phase transformations. Particular solutions and approximations to the stress fields taking into account the periodic or statistical character of the composite material's eigenstrain have been developed.

Strain engineering

Lattice misfit strains are also a class of eigenstrains, caused by growing a crystal of one lattice parameter on top of a crystal with a different lattice parameter. Controlling these strains can improve the electronic properties of an epitaxially grown semiconductor. See: strain engineering.

See also

Residual stress Strain (mechanics)

Text derived from https://en.wikipedia.org/w/index.php?oldid=1326636719 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001326636719 · captured 1765325872.0 · version history

Cite this page as: encyclopegia.org, “Eigenstrain”, snapshot enwiki-001326636719. https://encyclopegia.org/a/eigenstrain

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.