Electric potential
≈ 10 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Electric potential, also known as the electrostatic potential or electric field potential, is a field of scalar quantities through space, often denoted with the letter \varphi or V , that gives, for each point in space, the electric potential energy per unit of electric charge that a point charge would have if it was located at that point: at every point, a particle of charge q_{\text{particle}} would have the electric potential energy U_{\text{particle when at the point}}=q_{\text{particle}}\,V_{\text{point}} .
The difference in electric potential energy U, U = U_B - U_A , that a charged particle of charge q would have between two points A and B in a static electric field, equals q times the difference V_B - V_A of the electric potentials at A and B: U_B - U_A = q \times (V_B - V_A) . More precisely, electric potential is the amount of work needed to move a test charge from a reference point to a specific point in a static electric field, normalized to a unit of charge.
The test charge used is small enough that disturbance to the field-producing charges is unnoticeable, and its motion across the field is supposed to proceed with negligible acceleration, so as to avoid the test charge acquiring kinetic energy or producing radiation. By definition, the electric potential at the reference point is zero units.…
Electric potential, also known as the electrostatic potential or electric field potential, is a field of scalar quantities through space, often denoted with the letter \varphi or V , that gives, for each point in space, the electric potential energy per unit of electric charge that a point charge would have if it was located at that point: at every point, a particle of charge q_{\text{particle}} would have the electric potential energy U_{\text{particle when at the point}}=q_{\text{particle}}\,V_{\text{point}} .
The difference in electric potential energy U, U = U_B - U_A , that a charged particle of charge q would have between two points A and B in a static electric field, equals q times the difference V_B - V_A of the electric potentials at A and B: U_B - U_A = q \times (V_B - V_A) . More precisely, electric potential is the amount of work needed to move a test charge from a reference point to a specific point in a static electric field, normalized to a unit of charge.
The test charge used is small enough that disturbance to the field-producing charges is unnoticeable, and its motion across the field is supposed to proceed with negligible acceleration, so as to avoid the test charge acquiring kinetic energy or producing radiation. By definition, the electric potential at the reference point is zero units. Typically, the reference point is earth or a point at infinity, although any point can be used.
In classical electrostatics, the electrostatic field is a vector quantity expressed as the gradient of the electrostatic potential, which is a scalar quantity denoted by or occasionally , equal to the electric potential energy of any charged particle at any location (measured in joules) divided by the charge of that particle (measured in coulombs). By dividing out the charge on the particle a quotient is obtained that is a property of the electric field itself. In short, an electric potential is the electric potential energy per unit charge.
This value can be calculated in either a static (time-invariant) or a dynamic (time-varying) electric field at a specific time with the unit joules per coulomb (J⋅C −1 ) or volt (V). The electric potential at infinity is assumed to be zero. In electrodynamics, when time-varying fields are present, the electric field cannot be expressed only as a scalar potential. Instead, the electric field can be expressed as both the scalar electric potential and the magnetic vector potential.
The electric potential and the magnetic vector potential together form a four-vector, so that the two kinds of potential are mixed under Lorentz transformations. Practically, the electric potential is a continuous function in all space, because a spatial derivative of a discontinuous electric potential yields an electric field of impossibly infinite magnitude. Notably, the electric potential due to an idealized point charge (proportional to , with the distance from the point charge) is continuous in all space except at the location of the point charge.
Though electric field is not continuous across an idealized surface charge, it is not infinite at any point. Therefore, the electric potential is continuous across an idealized surface charge.
Additionally, an idealized line of charge has electric potential (proportional to , with the radial distance from the line of charge) is continuous everywhere except on the line of charge. |\mathbf{F}| = q |\mathbf{E}|. |indent=: |equation= V_\mathbf{E} = - \int_{\mathcal{C} } \mathbf{E} \cdot \mathrm{d} \boldsymbol{\ell}\, |cellpadding |border |border colour = #50C478 |background colour = #ECFCC4}} where is an arbitrary path from some fixed reference point to ; it is uniquely determined up to a constant that is added or subtracted from the integral.
In electrostatics, the Maxwell-Faraday equation reveals that the curl \nabla\times\mathbf{E} is zero, making the electric field conservative. Thus, the line integral above does not depend on the specific path chosen but only on its endpoints, making V_\mathbf{E} well-defined everywhere. The gradient theorem then allows us to write: This states that the electric field points "downhill" towards lower voltages.
By Gauss's law, the potential can also be found to satisfy Poisson's equation: \mathbf{\nabla} \cdot \mathbf{E} = \mathbf{\nabla} \cdot \left (- \mathbf{\nabla} V_\mathbf{E} \right ) = -\nabla^2 V_\mathbf{E} = \rho / \varepsilon_0 where is the total charge density and \mathbf{\nabla}\cdot denotes the divergence. The concept of electric potential is closely linked with potential energy. A test charge, , has an electric potential energy, , given by U_ \mathbf{E} = q\,V.
The potential energy and hence, also the electric potential, is only defined up to an additive constant: one must arbitrarily choose a position where the potential energy and the electric potential are zero. These equations cannot be used if i.e., in the case of a non-conservative electric field (caused by a changing magnetic field; see Maxwell's equations). The generalization of electric potential to this case is described in the section .
V_\mathbf{E} = \frac{1}{4 \pi \varepsilon_0} \frac{Q}{r}, where is the permittivity of vacuum , is known as the Coulomb potential. Note that, in contrast to the magnitude of an electric field due to a point charge, the electric potential scales respective to the reciprocal of the radius, rather than the radius squared. The electric potential at any location, , in a system of point charges is equal to the sum of the individual electric potentials due to every point charge in the system.
This fact simplifies calculations significantly, because addition of potential (scalar) fields is much easier than addition of the electric (vector) fields. Specifically, the potential of a set of discrete point charges at points becomes V_\mathbf{E}(\mathbf{r}) = \frac{1}{4\pi\varepsilon_0} \sum_{i=1}^n\frac{q_i} \, where is a point at which the potential is evaluated; is a point at which there is a nonzero charge; and is the charge at the point .
And the potential of a continuous charge distribution becomes V_\mathbf{E}(\mathbf{r}) = \frac{1}{4\pi\varepsilon_0} \int_R \frac{\rho(\mathbf{r}')} \mathrm{d}^3 r'\,, where is a point at which the potential is evaluated; is a region containing all the points at which the charge density is nonzero; is a point inside ; and is the charge density at the point . The equations given above for the electric potential (and all the equations used here) are in the forms required by SI units.
In some other (less common) systems of units, such as CGS-Gaussian, many of these equations would be altered. \mathbf{B} = \mathbf{\nabla} \times \mathbf{A} where is the magnetic field. By the fundamental theorem of vector calculus, such an can always be found, since the divergence of the magnetic field is always zero due to the absence of magnetic monopoles.
Now, the quantity \mathbf{F} = \mathbf{E} + \frac{\partial\mathbf{A}}{\partial t} is a conservative field, since the curl of \mathbf{E} is canceled by the curl of \frac{\partial\mathbf{A}}{\partial t} according to the Maxwell–Faraday equation. One can therefore write \mathbf{E} = -\mathbf{\nabla}V - \frac{\partial\mathbf{A}}{\partial t} , where is the scalar potential defined by the conservative field . The electrostatic potential is simply the special case of this definition where is time-invariant.
On the other hand, for time-varying fields, -\int_a^b \mathbf{E} \cdot \mathrm{d}\boldsymbol{\ell} \neq V_{(b)} - V_{(a)} unlike electrostatics. \begin{align} V^\prime &= V - \frac{\partial\psi}{\partial t} \\ \mathbf{A}^\prime &= \mathbf{A} + \nabla\psi \end{align} Given different choices of gauge, the electric potential could have quite different properties. In the Coulomb gauge, the electric potential is given by Poisson's equation \nabla^2 V=-\frac{\rho}{\varepsilon_0} just like in electrostatics.
However, in the Lorenz gauge, the electric potential is a retarded potential that propagates at the speed of light and is the solution to an inhomogeneous wave equation: \nabla^2 V - \frac{1}{c^2}\frac{\partial^2 V}{\partial t^2} = -\frac{\rho}{\varepsilon_0}
Units
The SI derived unit of electric potential is the volt (in honor of Alessandro Volta), denoted as V, which is why the electric potential difference between two points in space is known as a voltage. Older units are rarely used today. Variants of the centimetre–gram–second system of units included a number of different units for electric potential, including the abvolt and the statvolt.
Galvani potential versus electrochemical potential
Inside metals (and other solids and liquids), the energy of an electron is affected not only by the electric potential, but also by the specific atomic environment that it is in. When a voltmeter is connected between two different types of metal, it measures the potential difference corrected for the different atomic environments. The quantity measured by a voltmeter is called electrochemical potential or fermi level, while the pure unadjusted electric potential, , is sometimes called the Galvani potential, . The terms "voltage" and "electric potential" are a bit ambiguous but one may refer to of these in different contexts.
Common formulas
See also
Absolute electrode potential Electrochemical potential Electrode potential
References
Text derived from https://en.wikipedia.org/w/index.php?oldid=1377473105 under CC BY-SA 4.0; modifications have been made.