{
  "id": "enwiki-001360520533",
  "slug": "electrical-reactance",
  "title": "Electrical reactance",
  "qid": "",
  "lead": "In electrical circuits, reactance is the opposition presented to alternating current by inductance and capacitance. It is measured in ohms. Along with resistance, it is one of two elements of impedance; however, while both elements involve transfer of electrical energy, no dissipation of electrical energy as heat occurs in reactance; instead, the reactance stores energy until a quarter-cycle later when the energy is returned to the circuit. Greater reactance gives smaller current for the same applied voltage. Reactance is used to compute amplitude and phase changes of sinusoidal alternating current going through a circuit element. Like resistance, reactance is measured in ohms, with positive values indicating reactance and negative indicating reactance. It is denoted by the symbol . An ideal resistor has zero reactance, whereas ideal reactors have no shunt conductance and no series resistance. As frequency increases, inductive reactance increases and capacitive reactance decreases.",
  "body": "In electrical circuits, reactance is the opposition presented to alternating current by inductance and capacitance. It is measured in ohms. Along with resistance, it is one of two elements of impedance; however, while both elements involve transfer of electrical energy, no dissipation of electrical energy as heat occurs in reactance; instead, the reactance stores energy until a quarter-cycle later when the energy is returned to the circuit. Greater reactance gives smaller current for the same applied voltage. Reactance is used to compute amplitude and phase changes of sinusoidal alternating current going through a circuit element. Like resistance, reactance is measured in ohms, with positive values indicating reactance and negative indicating reactance. It is denoted by the symbol . An ideal resistor has zero reactance, whereas ideal reactors have no shunt conductance and no series resistance. As frequency increases, inductive reactance increases and capacitive reactance decreases. X_C = -\\frac {1} {\\omega C} = -\\frac {1} {2\\pi f C}. Another choice is to define capacitive reactance as a positive number, X_C = \\frac {1} {\\omega C} = \\frac {1} {2\\pi f C}. In this case however one needs to remember to add a negative sign for the impedance of a capacitor, i.e. . At , the magnitude of the capacitor's reactance is infinite, behaving like an open circuit (preventing any current from flowing through the dielectric). As frequency increases, the magnitude of reactance decreases, allowing more current to flow. As f approaches , the capacitor's reactance approaches , behaving like a short circuit. The application of a DC voltage across a capacitor causes positive charge to accumulate on one side and negative charge to accumulate on the other side; the electric field due to the accumulated charge is the source of the opposition to the current. When the potential associated with the charge exactly balances the applied voltage, the current goes to zero. Driven by an AC supply (ideal AC current source), a capacitor will only accumulate a limited amount of charge before the potential difference changes polarity and the charge is returned to the source. The higher the frequency, the less charge will accumulate and the smaller the opposition to the current. X_L = \\omega L = 2\\pi f L. The average current flowing through an inductance L in series with a sinusoidal AC voltage source of RMS amplitude A and frequency f is equal to: I_L = {A \\over \\omega L} = {A \\over 2\\pi f L}. Because a square wave has multiple amplitudes at sinusoidal harmonics, the average current flowing through an inductance L in series with a square wave AC voltage source of RMS amplitude A and frequency f is equal to: I_L = {A \\pi^2 \\over 8 \\omega L} = {A\\pi \\over 16 f L}, making it appear as if the inductive reactance to a square wave was about 19% smaller X_L = {16 \\over \\pi} f L than the reactance to the AC sine wave. Any conductor of finite dimensions has inductance; the inductance is made larger by the multiple turns in an electromagnetic coil. Faraday's law of electromagnetic induction gives the counter-emf \\mathcal{E} (voltage opposing current) due to a rate-of-change of magnetic flux density \\scriptstyle{B} through a current loop: \\mathcal{E} = -{{d\\Phi_B} \\over dt}. For an inductor consisting of a coil with N loops this gives: \\mathcal{E} = -N{d\\Phi_B \\over dt}. The counter-emf is the source of the opposition to current flow. A constant direct current has a zero rate-of-change, and sees an inductor as a short-circuit (it is typically made from a material with a low resistivity). An alternating current has a time-averaged rate-of-change that is proportional to frequency, this causes the increase in inductive reactance with frequency. \\mathbf{Z} = R + \\mathbf{j}X, where: \\mathbf{Z} is the complex impedance, measured in ohms; R is the resistance, measured in ohms – it is the real part of the impedance {R=\\text{Re}{(\\mathbf{Z})}} ; X is the reactance, measured in ohms – it is the imaginary part of the impedance {X=\\text{Im}{(\\mathbf{Z})}} ; and \\mathbf{j} is the square root of negative one, usually represented by \\mathbf{i} in non-electrical formulas. \\mathbf{j} is used so as not to confuse the imaginary unit with current, commonly represented by . When both a capacitor and an inductor are placed in series in a circuit, their contributions to the total circuit impedance are opposite. Capacitive reactance X_C and inductive reactance X_L contribute to the total reactance X as follows: {X = X_L + X_C = \\omega L -\\frac {1} {\\omega C}}, where: X_L is the inductive reactance, measured in ohms; X_C is the capacitive reactance, measured in ohms; and \\omega is the angular frequency, 2\\pi times the frequency in Hz. Hence: if , the total reactance is said to be inductive; if , then the impedance is purely resistive; if , the total reactance is said to be capacitive. Note however that if X_L and X_C are assumed both positive by definition, then the intermediary formula changes to a difference: {X = X_L - X_C = \\omega L -\\frac {1} {\\omega C}}, but the ultimate value is the same. \\begin{align} \\mathbf{Z}_C &= {1 \\over \\omega C}e^{-\\mathbf{j}{\\pi \\over 2}} = \\mathbf{j}\\left({ -\\frac{1}{\\omega C}}\\right) = \\mathbf{j}X_C, \\\\ \\mathbf{Z}_L &= \\omega Le^{\\mathbf{j}{\\pi \\over 2}} = \\mathbf{j}\\omega L = \\mathbf{j}X_L\\quad. \\end{align} For a reactive component the sinusoidal voltage across the component is in quadrature (a \\tfrac{\\pi}{2} phase difference) with the sinusoidal current through the component. The component alternately absorbs energy from the circuit and then returns energy to the circuit, thus a pure reactance does not dissipate power.",
  "categories": [
    "114461681",
    "22938924",
    "23118434",
    "23603337",
    "31417500",
    "71735855"
  ],
  "license": "CC BY-SA 4.0",
  "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1360520533",
  "content_hash": "",
  "created_at": null,
  "updated_at": 1782080635.0,
  "claims": [],
  "contradictions": [],
  "confidence": 0.6,
  "csl": {
    "id": "enwiki-001360520533",
    "type": "webpage",
    "title": "Electrical reactance",
    "author": [
      {
        "family": "Anticloud FZ LLE",
        "literal": "Anticloud FZ LLE"
      }
    ],
    "container-title": "encyclopegia.org",
    "publisher": "Anticloud FZ LLE",
    "publisher-place": "Dubai, United Arab Emirates",
    "URL": "https://encyclopegia.org/a/electrical-reactance",
    "issued": {
      "date-parts": [
        [
          2026,
          11,
          19
        ]
      ]
    },
    "accessed": {
      "date-parts": [
        [
          2026,
          11,
          19
        ]
      ]
    },
    "license": "CC BY-SA 4.0",
    "DOI": "eo1:enwiki-001360520533",
    "isBasedOn": "https://en.wikipedia.org/w/index.php?oldid=1360520533",
    "note": "Immutable snapshot enwiki-001360520533"
  }
}