Lesson plan

Electro-optic modulator

An electro–optic modulator (EOM) is an optical device in which a signal-controlled element exhibiting an electro–optic effect is used to modulate a beam of light. The modulation may be imposed on the phase, frequency, amplitude, or polarization of the beam. Modulation bandwidths extending into the gigahertz range are possible with the use of laser-controlled modulators. The electro–optic effect describes two phenomena, the change of absorption and the change in the refractive index of a material, resulting from the application of a DC or an electric field with much lower frequency than the optical carrier. This is caused by forces that distort the position, orientation, or shape of the molecules constituting the material. Generally, a nonlinear optical material, such as ferroelectrics like lithium niobate (LiNbO 3 ) or barium titanate (BaTiO 3 ), polymers, or organic electro–optic materials, with an incident static or low frequency optical field will see a modulation of its refractive index. The simplest kind of EOM consists of a crystal, such as lithium niobate, whose refractive index is a function of the strength of the local electric field. That means that if lithium niobate is exposed to an electric field, light will travel more slowly through it.…

Back to article

Article summary

An electro–optic modulator (EOM) is an optical device in which a signal-controlled element exhibiting an electro–optic effect is used to modulate a beam of light. The modulation may be imposed on the phase, frequency, amplitude, or polarization of the beam. Modulation bandwidths extending into the gigahertz range are possible with the use of laser-controlled modulators. The electro–optic effect describes two phenomena, the change of absorption and the change in the refractive index of a material, resulting from the application of a DC or an electric field with much lower frequency than the optical carrier. This is caused by forces that distort the position, orientation, or shape of the molecules constituting the material. Generally, a nonlinear optical material, such as ferroelectrics like lithium niobate (LiNbO 3 ) or barium titanate (BaTiO 3 ), polymers, or organic electro–optic materials, with an incident static or low frequency optical field will see a modulation of its refractive index. The simplest kind of EOM consists of a crystal, such as lithium niobate, whose refractive index is a function of the strength of the local electric field. That means that if lithium niobate is exposed to an electric field, light will travel more slowly through it.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.