Electro-oxidation
≈ 5 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Electro-oxidation (EO or EOx), also known as anodic oxidation or electrochemical oxidation (EC), is a technique used for wastewater treatment, mainly for industrial effluents, and is a type of advanced oxidation process (AOP). The most general layout comprises two electrodes, operating as anode and cathode, connected to a power source. When an energy input and sufficient supporting electrolyte are provided to the system, strong oxidizing species are formed, which interact with the contaminants and degrade them.
The refractory compounds are thus converted into reaction intermediates and, ultimately, into water and CO 2 by complete mineralization. Electro-oxidation has recently grown in popularity thanks to its ease of set-up and effectiveness in treating harmful and recalcitrant organic pollutants, which are typically difficult to degrade with conventional wastewater remediation processes. Also, it does not require any external addition of chemicals (contrary to other processes), as the required reactive species are generated at the anode surface.
Electro-oxidation has been applied to treat a wide variety of harmful and non-biodegradable contaminants, including aromatics, pesticides, drugs and dyes. Due to its relatively high operating costs, it is often combined with other technologies, such as biological remediation.…
How it works
Electro-oxidation (EO or EOx), also known as anodic oxidation or electrochemical oxidation (EC), is a technique used for wastewater treatment, mainly for industrial effluents, and is a type of advanced oxidation process (AOP). The most general layout comprises two electrodes, operating as anode and cathode, connected to a power source. When an energy input and sufficient supporting electrolyte are provided to the system, strong oxidizing species are formed, which interact with the contaminants and degrade them.
The refractory compounds are thus converted into reaction intermediates and, ultimately, into water and CO 2 by complete mineralization. Electro-oxidation has recently grown in popularity thanks to its ease of set-up and effectiveness in treating harmful and recalcitrant organic pollutants, which are typically difficult to degrade with conventional wastewater remediation processes. Also, it does not require any external addition of chemicals (contrary to other processes), as the required reactive species are generated at the anode surface.
Electro-oxidation has been applied to treat a wide variety of harmful and non-biodegradable contaminants, including aromatics, pesticides, drugs and dyes. Due to its relatively high operating costs, it is often combined with other technologies, such as biological remediation. Electro-oxidation can additionally be paired with other electrochemical technologies such as electrocoagulation, consecutively or simultaneously, to further reduce operational costs while achieving high degradation standards.
GCE=FV\frac{(COD_0-COD_t)}{8It} Where COD 0 and COD t are the chemical oxygen demand (g/dm 3 ) at time 0 and after the treatment time t, F is the Faraday's constant (96'485 C/mol), V is the electrolyte volume (dm 3 ), I is the current (A), t is the treatment time (h) and 8 is the oxygen equivalent mass. Current efficiency is a time dependent parameter and it decreases monotonically with treatment time. Instead, the specific energy consumption measures the energy required to remove a unit of COD from the solution and is typically expressed in .
It can be calculated according to: EC=\frac{E_CIt}{(\Delta COD)_tV_s} Where E C is the cell voltage (V), I is the current (A), t is the treatment time (h), (ΔCOD) t is the COD decay at the end of the process (g/L) and V s is the solute volume (L).
As the current efficiency may vary significantly depending on the treated solution, one should always find the optimal compromise between current density, treatment time and the resulting specific energy consumption, so to meet the required removal efficiency. j_L=\frac{Fk_dCOD}{8} Where j L is the limiting current density (A/m 2 ), F is the Faraday's constant (96'485 C/mol), k d is the mass transfer coefficient (m/s), COD is the chemical oxygen demand for the organic pollutant (g/dm 3 ) and 8 is the oxygen equivalent mass.
According to this equation, the lower the COD the lower the corresponding limiting current. Hence, systems with low COD are likely to be operating in diffusion control, exhibiting pseudo-first order kinetics with exponential decrease. Conversely, for high COD concentration (roughly above 4000 mg/L) pollutants are degraded under kinetic control (actual current below the limiting value), following a linear trend according to zero-order kinetics.
For intermediate values, the COD initially decreases linearly, under kinetic control, but below a critical COD value diffusion becomes the limiting step, resulting in an exponential trend. If the limiting current density is obtained with other analytical procedures, such as cyclic voltammetry, the proposed equation can be used to retrieve the corresponding mass transfer coefficient for the investigated system.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1351309941 under CC BY-SA 4.0; modifications have been made.