Electron diffraction

Uses your system voice; voice and rate in settings.

Snapshot

≈ 27 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

crystal in a piece of steel|alt=Electron diffraction pattern showing white spots on a dark background, as a general example. Electron diffraction is a generic term for phenomena associated with changes in the direction of electron beams due to elastic interactions with atoms. It occurs due to elastic scattering, when there is no change in the energy of the electrons. The negatively charged electrons are scattered due to Coulomb forces when they interact with both the positively charged atomic core and the negatively charged electrons around the atoms.

The resulting map of the directions of the electrons far from the sample is called a diffraction pattern, see for instance Figure 1. Beyond patterns showing the directions of electrons, electron diffraction also plays a major role in the contrast of images in electron microscopes. This article provides an overview of electron diffraction and electron diffraction patterns, collectively referred to by the generic name electron diffraction. This includes aspects of how in a general way electrons can act as waves, and diffract and interact with matter.…

Background

crystal in a piece of steel|alt=Electron diffraction pattern showing white spots on a dark background, as a general example. Electron diffraction is a generic term for phenomena associated with changes in the direction of electron beams due to elastic interactions with atoms. It occurs due to elastic scattering, when there is no change in the energy of the electrons. The negatively charged electrons are scattered due to Coulomb forces when they interact with both the positively charged atomic core and the negatively charged electrons around the atoms.

The resulting map of the directions of the electrons far from the sample is called a diffraction pattern, see for instance Figure 1. Beyond patterns showing the directions of electrons, electron diffraction also plays a major role in the contrast of images in electron microscopes. This article provides an overview of electron diffraction and electron diffraction patterns, collectively referred to by the generic name electron diffraction. This includes aspects of how in a general way electrons can act as waves, and diffract and interact with matter.

It also involves the extensive history behind modern electron diffraction, how the combination of developments in the 19th century in understanding and controlling electrons in vacuum and the early 20th century developments with electron waves were combined with early instruments, giving birth to electron microscopy and diffraction in 1920–1935. While this was the birth, there have been a large number of further developments since then. There are many types and techniques of electron diffraction.

The most common approach is where the electrons transmit through a thin sample, from 1 nm to 100 nm (10 to 1000 atoms thick), where the results depend upon how the atoms are arranged in the material, for instance a single crystal, many crystals or different types of solids. Other cases such as larger repeats, no periodicity or disorder have their own characteristic patterns.

There are many different ways of collecting diffraction information, from parallel illumination to a converging beam of electrons or where the beam is rotated or scanned across the sample which produce information that is often easier to interpret. There are also many other types of instruments. For instance, in a scanning electron microscope (SEM), electron backscatter diffraction can be used to determine crystal orientation across the sample.

Electron diffraction patterns can also be used to characterize molecules using gas electron diffraction, liquids, surfaces using lower energy electrons, a technique called LEED, and by reflecting electrons off surfaces, a technique called RHEED. There are also many levels of analysis of electron diffraction, including: The simplest approximation using the de Broglie wavelength for electrons, where only the geometry is considered and often Bragg's law is invoked.

This approach only considers the electrons far from the sample, a far-field or Fraunhofer approach. The first level of more accuracy where it is approximated that the electrons are only scattered once, which is called kinematical diffraction and is also a far-field or Fraunhofer approach. More complete and accurate explanations where multiple scattering is included, what is called dynamical diffraction (e.g. refs ).

These involve more general analyses using relativistically corrected Schrödinger equation methods, and track the electrons through the sample, being accurate both near and far from the sample (both Fresnel and Fraunhofer diffraction). Although similar to x-ray and neutron diffraction, where the simplest approximations are quite accurate, simple models for electron diffraction only provide the geometry of the intensities in a diffraction pattern.

Dynamical diffraction approaches are needed to calculate more accurate intensities and the positions of diffraction spots. for more details.|alt=A video illustrating a wavepacket of electrons, a small bundle. Independent of the developments for electrons in vacuum, at about the same time the components of quantum mechanics were being assembled. In 1924 Louis de Broglie in his PhD thesis Recherches sur la théorie des quanta introduced his theory of electron waves.

He suggested that an electron around a nucleus could be thought of as standing waves, and that electrons and all matter could be considered as waves. He merged the idea of thinking about them as particles (or corpuscles), and of thinking of them as waves. He proposed that particles are bundles of waves (wave packets) that move with a group velocity and have an effective mass, see for instance Figure 4. Both of these depend upon the energy, which in turn connects to the wavevector and the relativistic formulation of Albert Einstein a few years before.

This rapidly became part of what was called by Erwin Schrödinger undulatory mechanics, now called the Schrödinger equation or wave mechanics. As stated by Louis de Broglie on September 8, 1927, in the preface to the German translation of his theses (in turn translated into English): M. Einstein from the beginning has supported my thesis, but it was M. E. Schrödinger who developed the propagation equations of a new theory and who in searching for its solutions has established what has become known as "Wave Mechanics".

The Schrödinger equation combines the kinetic energy of waves and the potential energy due to, for electrons, the Coulomb potential. He was able to explain earlier work such as the quantization of the energy of electrons around atoms in the Bohr model, as well as many other phenomena. Electron waves as hypothesized by de Broglie were automatically part of the solutions to his equation, see also introduction to quantum mechanics and matter waves.

Both the wave nature and the undulatory mechanics approach were experimentally confirmed for electron beams by experiments from two groups performed independently, the first the Davisson–Germer experiment, the other by George Paget Thomson and Alexander Reid; see note for more discussion. Alexander Reid, who was Thomson's graduate student, performed the first experiments, but he died soon after in a motorcycle accident and is rarely mentioned.

These experiments were rapidly followed by the first non-relativistic diffraction model for electrons by Hans Bethe based upon the Schrödinger equation, which is very close to how electron diffraction is now described. Significantly, Clinton Davisson and Lester Germer noticed that their results could not be interpreted using a Bragg's law approach as the positions were systematically different; the approach of Hans Bethe which includes the refraction due to the average potential yielded more accurate results.

These advances in understanding of electron wave mechanics were important for many developments of electron-based analytical techniques such as Seishi Kikuchi's observations of lines due to combined elastic and inelastic scattering, gas electron diffraction developed by Herman Mark and Raymond Weil, diffraction in liquids by Louis Maxwell, and the first electron microscopes developed by Max Knoll and Ernst Ruska. What is seen in an electron diffraction pattern depends upon the sample and also the energy of the electrons.

Impact

The electrons need to be considered as waves, which involves describing the electron via a wavefunction, written in crystallographic notation (see notes and ) as: \psi (\mathbf r) = \exp(2\pi i \mathbf k \cdot \mathbf r) for a position \mathbf r . This is a quantum mechanics description; one cannot use a classical approach. The vector \mathbf k is called the wavevector, has units of inverse nanometers, and the form above is called a plane wave as the term inside the exponential is constant on the surface of a plane.

The vector \mathbf k is what is used when drawing ray diagrams, and in vacuum is parallel to the direction or, better, group velocity or probability current of the plane wave. For most cases the electrons are travelling at a respectable fraction of the speed of light, so rigorously need to be considered using relativistic quantum mechanics via the Dirac equation, which as spin does not normally matter can be reduced to the Klein–Gordon equation.

Fortunately one can side-step many complications and use a non-relativistic approach based around the Schrödinger equation. Following Kunio Fujiwara and Archibald Howie, the relationship between the total energy of the electrons and the wavevector is written as: E = \frac{h^2 k^2}{2m^*} with m^* = m_0 + \frac{E}{2c^2} where h is the Planck constant, m^* is a relativistic effective mass used to cancel out the relativistic terms for electrons of energy E with c the speed of light and m_0 the rest mass of the electron.

The concept of effective mass occurs throughout physics (see for instance Ashcroft and Mermin), and comes up in the behavior of quasiparticles. A common one is the electron hole, which acts as if it is a particle with a positive charge and a mass similar to that of an electron, although it can be several times lighter or heavier. For electron diffraction the electrons behave as if they are non-relativistic particles of mass m^* in terms of how they interact with the atoms.

The wavelength of the electrons \lambda in vacuum is from the above equations \lambda = \frac 1 k = \frac{h}{\sqrt{2m^* E}} = \frac{h c}{\sqrt{E(2 m_0 c^2 + E)}}, and can range from about , roughly the size of an atom, down to a thousandth of that. Typically the energy of the electrons is written in electronvolts (eV), the voltage used to accelerate the electrons; the actual energy of each electron is this voltage times the electron charge. For context, the typical energy of a chemical bond is a few eV; electron diffraction involves electrons up to .

The magnitude of the interaction of the electrons with a material scales as 2 \pi \frac{m^*}{h^2 k} = 2\pi\frac{ m^* \lambda} {h^2} = \frac \pi {hc} \sqrt{\frac{2m_0 c^2}{E} + 1}. While the wavevector increases as the energy increases, the change in the effective mass compensates this so even at the very high energies used in electron diffraction there are still significant interactions.

The high-energy electrons interact with the Coulomb potential, which for a crystal can be considered in terms of a Fourier series (see for instance Ashcroft and Mermin), that is V(\mathbf r) = \sum V_g \exp(2 \pi i \mathbf g \cdot \mathbf r) with \mathbf g a reciprocal lattice vector and V_g the corresponding Fourier coefficient of the potential.

The reciprocal lattice vector is often referred to in terms of Miller indices (h k l) , a sum of the individual reciprocal lattice vectors \mathbf A,\mathbf B,\mathbf C with integers h, k, l in the form: \mathbf g = h \mathbf A + k \mathbf B + l \mathbf C (Sometimes reciprocal lattice vectors are written as \mathbf a^* , \mathbf b^* , \mathbf c^* and see note. ) The contribution from the V_g needs to be combined with what is called the shape function (e.g. ), which is the Fourier transform of the shape of the object.

If, for instance, the object is small in one dimension then the shape function extends far in that direction in the Fourier transform—a reciprocal relationship. Around each reciprocal lattice point one has this shape function. How much intensity there will be in the diffraction pattern depends upon the intersection of the Ewald sphere, that is energy conservation, and the shape function around each reciprocal lattice point—see Figure 6, 20 and 22. The vector from a reciprocal lattice point to the Ewald sphere is called the excitation error \mathbf s_g .

For transmission electron diffraction the samples used are thin, so most of the shape function is along the direction of the electron beam. For both LEED and RHEED the shape function is mainly normal to the surface of the sample. In LEED this results in (a simplification) back-reflection of the electrons leading to spots, see Figure 20 and 21 later, whereas in RHEED the electrons reflect off the surface at a small angle and typically yield diffraction patterns with streaks, see Figure 22 and 23 later.

By comparison, with both x-ray and neutron diffraction the scattering is significantly weaker, so typically requires much larger crystals, in which case the shape function shrinks to just around the reciprocal lattice points, leading to simpler Bragg's law diffraction. For all cases, when the reciprocal lattice points are close to the Ewald sphere (the excitation error is small) the intensity tends to be higher; when they are far away it tends to be smaller.

The set of diffraction spots at right angles to the direction of the incident beam are called the zero-order Laue zone (ZOLZ) spots, as shown in Figure 6. One can also have intensities further out from reciprocal lattice points which are in a higher layer. The first of these is called the first order Laue zone (FOLZ); the series is called by the generic name higher order Laue zone (HOLZ).

The result is that the electron wave after it has been diffracted can be written as an integral over different plane waves: \psi (\mathbf r) = \int \phi (\mathbf k) \exp(2 \pi i \mathbf k \cdot \mathbf r) d^3\mathbf k , that is a sum of plane waves going in different directions, each with a complex amplitude \phi (\mathbf k) .

(This is a three dimensional integral, which is often written as d\mathbf k rather than d^3\mathbf k .) For a crystalline sample these wavevectors have to be of the same magnitude for elastic scattering (no change in energy), and are related to the incident direction \mathbf k_0 by (see Figure 6) \mathbf k = \mathbf k_0 + \mathbf g + \mathbf s_g. A diffraction pattern detects the intensities I(\mathbf k) = \left| \phi(\mathbf k) \right| ^2 . For a crystal these will be near the reciprocal lattice points typically forming a two dimensional grid.

Different samples and modes of diffraction give different results, as do different approximations for the amplitudes \phi (\mathbf k) . A typical electron diffraction pattern in TEM and LEED is a grid of high intensity spots (white) on a dark background, approximating a projection of the reciprocal lattice vectors, see Figure 1, 9, 10, 11, 14 and 21 later.

There are also cases which will be mentioned later where diffraction patterns are not periodic, see Figure 15, have additional diffuse structure as in Figure 16, or have rings as in Figure 12, 13 and 24. With conical illumination as in CBED they can also be a grid of discs, see Figure 7, 9 and 18. RHEED is slightly different, see Figure 22, 23. If the excitation errors s_g were zero for every reciprocal lattice vector, this grid would be at exactly the spacings of the reciprocal lattice vectors.

This would be equivalent to a Bragg's law condition for all of them. In TEM the wavelength is small and this is close to correct, but not exact. In practice the deviation of the positions from a simple Bragg's law interpretation is often neglected, particularly if a column approximation is made (see below). In Kinematical theory an approximation is made that the electrons are only scattered once.

For transmission electron diffraction it is common to assume a constant thickness t , and also what is called the Column Approximation (e.g. references and further reading).

For a perfect crystal the intensity for each diffraction spot \mathbf g is then: I_{g} = \left|\phi(\mathbf k)\right|^2 \propto \left|F_{g}\frac{\sin(\pi t s_z)}{\pi s_z}\right|^2 where s_z is the magnitude of the excitation error |\mathbf s_z| along z, the distance along the beam direction (z-axis by convention) from the diffraction spot to the Ewald sphere, and F_{g} is the structure factor: F_{g} = \sum_{j=1}^N f_j \exp{(2 \pi i \mathbf g \cdot \mathbf r_j -T_j g^2)} the sum being over all the atoms in the unit cell with f_j the form factors, \mathbf g the reciprocal lattice vector, T_j is a simplified form of the Debye–Waller factor, and \mathbf k is the wavevector for the diffraction beam which is: \mathbf k = \mathbf k_0 + \mathbf g + \mathbf s_z for an incident wavevector of \mathbf k_0 , as in Figure 6 and above.

The excitation error comes in as the outgoing wavevector \mathbf k has to have the same modulus (i.e. energy) as the incoming wavevector \mathbf k_0 . The intensity in transmission electron diffraction oscillates as a function of thickness, which can be confusing; there can similarly be intensity changes due to variations in orientation and also structural defects such as dislocations. If a diffraction spot is strong it could be because it has a larger structure factor, or it could be because the combination of thickness and excitation error is "right".

Similarly the observed intensity can be small, even though the structure factor is large. This can complicate interpretation of the intensities. By comparison, these effects are much smaller in x-ray diffraction or neutron diffraction because they interact with matter far less and often Bragg's law is adequate. This form is a reasonable first approximation which is qualitatively correct in many cases, but more accurate forms including multiple scattering (dynamical diffraction) of the electrons are needed to properly understand the intensities.

While kinematical diffraction is adequate to understand the geometry of the diffraction spots, it does not correctly give the intensities and has a number of other limitations. For a more complete approach one has to include multiple scattering of the electrons using methods that date back to the early work of Hans Bethe in 1928. These are based around solutions of the Schrödinger equation using the relativistic effective mass m^* described earlier.

Even at very high energies dynamical diffraction is needed as the relativistic mass and wavelength partially cancel, so the role of the potential is larger than might be thought. |left|alt=Diagram of convergent-beam diffraction patterns with different energy filters. The ones where energy losses have been removed are clearer.

The main components of current dynamical diffraction of electrons include: Taking into account the scattering back into the incident beam both from diffracted beams and between all others, not just single scattering from the incident beam to diffracted beams. This is important even for samples which are only a few atoms thick. Modelling at least semi-empirically the role of inelastic scattering by an imaginary component of the potential, also called an "optical potential".

There is always inelastic scattering, and often it can have a major effect on both the background and sometimes the details, see Figure 7 and 18. Higher-order numerical approaches to calculate the intensities such as multislice, matrix methods which are called Bloch-wave approaches or muffin-tin approaches. With these diffraction spots which are not present in kinematical theory can be present, e.g. Contributions to the diffraction from elastic strain and crystallographic defects, and also what Jens Lindhard called the string potential.

For transmission electron microscopes effects due to variations in the thickness of the sample and the normal to the surface. Both in the geometry of scattering and calculations, for both LEED and RHEED, effects due to the presence of surface steps, surface reconstructions and other atoms at the surface. Often these change the diffraction details significantly. For LEED, use more careful analyses of the potential because contributions from exchange terms can be important. Without these the calculations may not be accurate enough.

Kikuchi lines, first observed by Seishi Kikuchi in 1928, are linear features created by electrons scattered both inelastically and elastically. As the electron beam interacts with matter, the electrons are diffracted via elastic scattering, and also scattered inelastically losing part of their energy. These occur simultaneously, and cannot be separated – according to the Copenhagen interpretation of quantum mechanics, only the probabilities of electrons at detectors can be measured.

These electrons form Kikuchi lines which provide information on the orientation. material, within the stereographic triangle|alt=A Kukuchi map, which is a collage of diffraction patterns used to both determine crystal orientation and also to tilt to different orientations. Kikuchi lines come in pairs forming Kikuchi bands, and are indexed in terms of the crystallographic planes they are connected to, with the angular width of the band equal to the magnitude of the corresponding diffraction vector |\mathbf g| .

The position of Kikuchi bands is fixed with respect to each other and the orientation of the sample, but not against the diffraction spots or the direction of the incident electron beam. As the crystal is tilted, the bands move on the diffraction pattern. Since the position of Kikuchi bands is quite sensitive to crystal orientation, they can be used to fine-tune a zone-axis orientation or determine crystal orientation.

They can also be used for navigation when changing the orientation between zone axes connected by some band, an example of such a map produced by combining many local sets of experimental Kikuchi patterns is in Figure 8; Kikuchi maps are available for many materials. (converging), and ring diffraction (parallel with many grains).|alt=Electron diffraction patterns from different types of crystals and different incident beam convergence. Electron diffraction in a TEM exploits controlled electron beams using electron optics.

Different types of diffraction experiments, for instance Figure 9, provide information such as lattice constants, symmetries, and sometimes to solve an unknown crystal structure.

It is common to combine it with other methods, for instance images using selected diffraction beams, high-resolution images showing the atomic structure, chemical analysis through energy-dispersive x-ray spectroscopy, investigations of electronic structure and bonding through electron energy loss spectroscopy, and studies of the electrostatic potential through electron holography; this list is not exhaustive.

Compared to x-ray crystallography, TEM analysis is significantly more localized and can be used to obtain information from tens of thousands of atoms to just a few or even single atoms. If a parallel beam is used to acquire a diffraction pattern from a single-crystal, the result is similar to a two-dimensional projection of the crystal reciprocal lattice.

From this one can determine interplanar distances and angles and in some cases crystal symmetry, particularly when the electron beam is down a major zone axis, see for instance the database by Jean-Paul Morniroli. However, projector lens aberrations such as barrel distortion as well as dynamical diffraction effects (e.g. ) cannot be ignored.

For instance, certain diffraction spots which are not present in x-ray diffraction can appear, for instance those due to Gjønnes-Moodie extinction conditions. simulated using CrysTBox for various crystal orientations. Note how the diffraction pattern (white/black) changes with the crystal orientation (yellow).|alt=A pair of image showing how diffraction patterns change with the orientation of the crystal.

If the sample is tilted relative to the electron beam, different sets of crystallographic planes contribute to the pattern yielding different types of diffraction patterns, approximately different projections of the reciprocal lattice, see Figure 11. This can be used to determine the crystal orientation, which in turn can be used to set the orientation needed for a particular experiment. Furthermore, a series of diffraction patterns varying in tilt can be acquired and processed using a diffraction tomography approach.

There are ways to combine this with direct methods algorithms using electrons and other methods such as charge flipping, or automated diffraction tomography to solve crystal structures. using simulation engine of CrysTBox. Corresponding experimental patterns can be seen in Figure 13. |alt=A pattern showing how diffraction patterns from different grain build up to yield a ring pattern.

Diffraction patterns depend on whether the beam is diffracted by one single crystal or by a number of differently oriented crystallites, for instance in a polycrystalline material. If there are many contributing crystallites, the diffraction image is a superposition of individual crystal patterns, see Figure 12. With a large number of grains this superposition yields diffraction spots of all possible reciprocal lattice vectors. This results in a pattern of concentric rings as shown in Figure 12 and 13.

Textured materials yield a non-uniform distribution of intensity around the ring, which can be used to discriminate between nanocrystalline and amorphous phases. However, diffraction often cannot differentiate between very small grain polycrystalline materials and truly random order amorphous. Here high-resolution transmission electron microscopy and fluctuation electron microscopy can be more powerful, although this is still a topic of continuing development.

[[File:CBEDThickness.png|thumb|Figure 18: Variations in CBED due to dynamical diffraction, with thickness increasing from a)-d) for Si [110]|left|alt=Changes in CBED patterns for different thicknesses of the sample, showing that they get more complicated with thicker samples. A CBED pattern consists of disks arranged similar to the spots in SAED. Intensity within the disks represents dynamical diffraction effects and symmetries of the sample structure, see Figure 7 and 18.

Even though the zone axis and lattice parameter analysis based on disk positions does not significantly differ from SAED, the analysis of disks content is more complex and simulations based on dynamical diffraction theory is often required. As illustrated in Figure 18, the details within the disk change with sample thickness, as does the inelastic background. With appropriate analysis CBED patterns can be used for indexation of the crystal point group, space group identification, measurement of lattice parameters, thickness or strain.

The disk diameter can be controlled using the microscope optics and apertures. The larger is the angle, the broader the disks are with more features. If the angle is increased to significantly, the disks begin to overlap. This is avoided in large angle convergent electron beam diffraction (LACBED) where the sample is moved upwards or downwards. There are applications, however, where the overlapping disks are beneficial, for instance with a ronchigram.

It is a CBED pattern, often but not always of an amorphous material, with many intentionally overlapping disks providing information about the optical aberrations of the electron optical system. .|alt=Experimental gas electron diffraction pattern, showing diffuse rings. Gas electron diffraction (GED) can be used to determine the geometry of molecules in gases. A gas carrying the molecules is exposed to the electron beam, which is diffracted by the molecules.

Since the molecules are randomly oriented, the resulting diffraction pattern consists of broad concentric rings, see Figure 24. The diffraction intensity is a sum of several components such as background, atomic intensity or molecular intensity. In GED the diffraction intensities at a particular diffraction angle \theta is described via a scattering variable defined as |s| = \frac{4\pi}{\lambda} \sin \left(\frac\theta 2\right).

The total intensity is then given as a sum of partial contributions: I_\text{tot}(s) = I_a(s) + I_m(s) + I_t(s) + I_b(s) , where I_a(s) results from scattering by individual atoms, I_m(s) by pairs of atoms and I_t(s) by atom triplets. Intensity I_b(s) corresponds to the background which, unlike the previous contributions, must be determined experimentally.

The intensity of atomic scattering I_a(s) is defined as I_a(s) = \frac{K^2}{R^2} I_0 \sum_{i=1}^N |f_i(s)|^2 , where K = (8 \pi ^2 me^2)/h^2 , R is the distance between the scattering object detector, I_0 is the intensity of the primary electron beam and f_i(s) is the scattering amplitude of the atom i of the molecular structure in the experiment. I_a(s) is the main contribution and easily obtained for known gas composition. Note that the vector s used here is not the same as the excitation error used in other areas of diffraction, see earlier.

The most valuable information is carried by the intensity of molecular scattering I_a(s) , as it contains information about the distance between all pairs of atoms in the molecule.

It is given by I_m(s) = \frac{K^2}{R^2} I_0 \sum_{i=1}^N \sum_{\stackrel{j=1}{i\neq j}}^N \left| f_i(s) \right| \left| f_j(s)\right| \frac{\sin [s(r_{ij}-\kappa s^2)]}{sr_{ij}} e^{-(1/2 l_{ij} s^2)} \cos [\eta _i (s) - \eta _i (s)] , where r_{ij} is the distance between two atoms, l_{ij} is the mean square amplitude of vibration between the two atoms, similar to a Debye–Waller factor, \kappa is the anharmonicity constant and \eta a phase factor which is important for atomic pairs with very different nuclear charges.

Evidence and sources

The summation is performed over all atom pairs. Atomic triplet intensity I_t(s) is negligible in most cases. If the molecular intensity is extracted from an experimental pattern by subtracting other contributions, it can be used to match and refine a structural model against the experimental data. Similar methods of analysis have also been applied to analyze electron diffraction data from liquids. .|alt=Kikuchi pattern, a set of line-like features from a scanning electron microscope.

In a scanning electron microscope the region near the surface can be mapped using an electron beam that is scanned in a grid across the sample. A diffraction pattern can be recorded using electron backscatter diffraction (EBSD), as illustrated in Figure 25, captured with a camera inside the microscope. A depth from a few nanometers to a few microns, depending upon the electron energy used, is penetrated by the electrons, some of which are diffracted backwards and out of the sample.

As result of combined inelastic and elastic scattering, typical features in an EBSD image are Kikuchi lines. Since the position of Kikuchi bands is highly sensitive to the crystal orientation, EBSD data can be used to determine the crystal orientation at particular locations of the sample. The data are processed by software yielding two-dimensional orientation maps.

As the Kikuchi lines carry information about the interplanar angles and distances and, therefore, about the crystal structure, they can also be used for phase identification or strain analysis.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1377070568 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

39 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.