Electronic beam curing

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Electronic Beam curing (EBC) is a surface curing process in the manufacture of high pressure laminate (HPL) boards. The process applies color to a single sheet of Kraft paper which is adhered to a HPL board in such a way that it will keep its color durably while remaining scratch-resistant. Unlike other HPL creation methods, EBC does not use heat. The EBC machine used in the curing process gives the finished HPL boards a surface that is both color-fade resistant and has a high resistance to damage.

The process works by first mixing color pastes to the desired color and then applying it to a single sheet of kraft paper. This substrate is then put in the EBC machine together with a protective foil. In the machine this sheet is then shot with electrons at such high velocity that the color impregnated paper hardens almost instantly. After being stored in a temperature-controlled room for a short duration the sheets are ready to be adhered to unfinished HPL boards in a process called dry forming.

Electronic Beam curing (EBC) is a surface curing process in the manufacture of high pressure laminate (HPL) boards. The process applies color to a single sheet of Kraft paper which is adhered to a HPL board in such a way that it will keep its color durably while remaining scratch-resistant. Unlike other HPL creation methods, EBC does not use heat. The EBC machine used in the curing process gives the finished HPL boards a surface that is both color-fade resistant and has a high resistance to damage.

The process works by first mixing color pastes to the desired color and then applying it to a single sheet of kraft paper. This substrate is then put in the EBC machine together with a protective foil. In the machine this sheet is then shot with electrons at such high velocity that the color impregnated paper hardens almost instantly. After being stored in a temperature-controlled room for a short duration the sheets are ready to be adhered to unfinished HPL boards in a process called dry forming.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1332647534 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001332647534 · captured 1768262840.0 · version history

Cite this page as: encyclopegia.org, “Electronic beam curing”, snapshot enwiki-001332647534. https://encyclopegia.org/a/electronic-beam-curing

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.