Electronic flight bag
An electronic flight bag (EFB) is an electronic information management device that helps flight crews perform flight management tasks more easily and efficiently with less paper providing the reference material often found in the pilot's…
≈ 8 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
An electronic flight bag (EFB) is an electronic information management device that helps flight crews perform flight management tasks more easily and efficiently with less paper providing the reference material often found in the pilot's carry-on flight bag, including the flight-crew operating manual, navigational charts, etc. In addition, the EFB can host purpose-built software applications to automate other functions normally conducted by hand, such as take-off performance calculations. The EFB gets its name from the traditional pilot's flight bag, which is typically a heavy (up to or over ) documents bag that pilots carry to the cockpit.
An EFB is intended primarily for cockpit/flightdeck or cabin use. For large and turbine aircraft, FAR 91.503 requires the presence of navigational charts on the airplane.
If an operator's sole source of navigational chart information is contained on an EFB, the operator must demonstrate the EFB will continue to operate throughout a decompression event, and thereafter, regardless of altitude.
]] An electronic flight bag (EFB) is an electronic information management device that helps flight crews perform flight management tasks more easily and efficiently with less paper providing the reference material often found in the pilot's carry-on flight bag, including the flight-crew operating manual, navigational charts, etc. In addition, the EFB can host purpose-built software applications to automate other functions normally conducted by hand, such as take-off performance calculations. The EFB gets its name from the traditional pilot's flight bag, which is typically a heavy (up to or over ) documents bag that pilots carry to the cockpit.
An EFB is intended primarily for cockpit/flightdeck or cabin use. For large and turbine aircraft, FAR 91.503 requires the presence of navigational charts on the airplane.
If an operator's sole source of navigational chart information is contained on an EFB, the operator must demonstrate the EFB will continue to operate throughout a decompression event, and thereafter, regardless of altitude.
History
The earliest EFB precursors came from individual pilots from FedEx in the early 1990s who used their personal laptops, referred to as Airport Performance Laptop Computers, to carry out aircraft performance calculations on the aircraft (this was a commercial off-the-shelf computer and was considered portable). The first true EFB, designed specifically to replace a pilot's entire kit bag, was patented by Angela Masson as the Electronic Kit Bag (EKB) in 1999.
In October 2003 KLM Airlines accepted the first installed EFB on a Boeing 777 aircraft. The Boeing EFB hardware was made by Astronautics Corporation of America and software applications were supplied by both Jeppesen and Boeing. In 2005, the first commercial Class 2 EFB STC was issued to Avionics Support Group, Inc. with its Constant Friction Mount (cfMount) as part of the EFB.
The installation was performed on a Miami Air Boeing B737NG. In 2009, Continental Airlines successfully completed the world’s first flight using Jeppesen Airport Surface Area Moving Map (AMM) showing “own ship” position on a Class 2 Electronic Flight Bag platform. The AMM application uses a high resolution database to dynamically render maps of the airport.
As personal computing technology became more compact and powerful, EFBs became capable of storing all the aeronautical charts for the entire world on a single three-pound (1.4 kg) computer, compared to the 80 lb (36 kg) of paper normally required for worldwide paper charts. Using EFBs can increase safety and enhance crew access to operating procedures and flight management information, and allow aircrews to calculate aircraft performance for departures and arrivals as well as aircraft weight and balance for loading-planning purposes.
The Air Force Special Operations Command (AFSOC) purchased an initial supply of over 3,000 iPad-based EFBs which were launched in December 2011. In a similar acquisition, Air Mobility Command initiated a contract for up to 18,000 iPad-based EFBs.
The Air Force Special Operations Command internally developed a secure method of transferring the National Geo-Spatial Intelligence Agency's (NGA) monthly Flight Information Publications (FLIP) dataset to all its users worldwide. After trialing cockpit iPads as EFBs in 2011, Delta Air Lines announced in August 2013 it would replace a policy allowing pilots to use personal tablets as EFBs.
Delta planned to provide new certified EFBs to all of its pilots by May 2014, after FAA approval in February. Early risk of breakage to iPads used as EFBs was addressed through rugged case design. However, the purchase of iPad from AFSOC was cancelled in February 2012 due to security concerns, where Russian-made software procurement issues may cause potential risks to expose end users.
EFBs were initially divided into a number of hardware classes and software types. Legacy EFB hardware classes were: Class 1 – Standard commercial-off-the-shelf (COTS) equipment such as laptops or handheld electronic devices. These devices are used as loose equipment and are typically stowed during critical phases of flight (below 10,000 feet).
A Class 1 EFB is considered a Portable Electronic Device (PED). Class 1 EFBs, such as Cockpit iPads, may be used to display Type B applications in critical phases of flight provided that they are 'secured and viewable'. Class 2 – Portable Electronic Devices, and range from modified COTS equipment to purpose-built devices.
Mounting, power (ship's power as primary) or data connectivity of an EFB typically requires the application of an STC, Type Certificate or Amended Type Certificate. (ref: FAA Order 8900.1) Class 3 – Considered "installed equipment" and subject to airworthiness requirements and, unlike PEDs, they must be under design control.
The hardware is subject to a limited number of RTCA DO-160E requirements (for non-essential equipment—typical crash safety and Conducted and Radiated Emissions testing). Class 3 EFBs are typically installed under STC or other airworthiness approval. EFB may host a wide array of applications, initially categorized in three software categories.
Type A Static applications, such as document viewer (PDF, HTML, and XML formats); Flight Crew Operating Manuals, and other printed documents like airport NOTAM; Type B Static or dynamic electronic "charts" to include (though not requiring) panning, zooming, and scrolling; (AC120-76(), Appendix B) Type C use as a Multi-function display (MFD); in at least one case as part of an Automatic Dependent Surveillance-Broadcast system. Type C applications must run only on Class 3 EFB.
Type C applications were considered as subject to airworthiness requirements and as such must be developed in conformance with DO-178/ED-12 objectives and run on Class 3 EFB.
Cockpit iPad
Cockpit iPads are iPads used in the aviation industry as part of an EFB. Early in 2011, the FAA authorized charter company Executive Jet Management to use iPad records without the backup paper charts. This helped make way for the iPad to become an aviation instrument for the rest of the industry.
Alaska Airlines, Delta Air Lines, and American Airlines planned test programs. The main motive to use the iPad as a navigation tool is the practicality of the product. The iPad would replace about of paper charts used by pilots that include aircraft flight manuals, approach plate, navigation charts, policy manuals, minimum equipment list and taxi charts.
Major airlines based in the United States are mainly paper based, which includes some who have fleets of 900 plus planes. This translates to a lot of paper in the form of charts that could be saved by the iPad. The switch to an electronic system would also make life easier on the pilot.
No longer would pilots carry around a heavy flight bag. It would be replaced by the much lighter, more compact tablet. When used in conjunction with a specially designed strap, this small size allows them to be used in place of kneeboards.
Flight planning is also made easier by the iPad. The pilot would be able to use one device to check everything from the weather to other airport facilities and flight plans. All this makes a pilot's life a lot easier.
A number of potential issues have been brought up including distractions in the cockpit, but the iPads are prohibited from being used for non-flight purposes and pilots are still using onboard GPS instruments. Other potential safety issues included application failure and system failure, but in the three-month test Executive Jet Management conducted, not once did the application shut off or have a failure.
Tests did show that if a failure did take place, the program could reboot in four to six seconds. Extra iPads in the cockpit are also being talked about as a backup to a system failure. Airlines are also looking into the safety of the placement of the iPads in the cockpit.
The most popular placement is on a pilot's kneeboard, a strap that connects to the pilot's upper thigh and makes the device hands free, but many commercial airlines are looking into a dock that is connected to the plane itself.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1378750834 under CC BY-SA 4.0; modifications have been made.