Lesson plan
Electronic kit
Lectron elements (Design Museum of Barcelona) Experimentation Kit An electronic kit is a package of electrical components used to build an electronic device. Generally, kits are composed of electronic components, a circuit diagram (schematic), assembly instructions, and often a printed circuit board (PCB) or another type of prototyping board. There are two types of kits. Some build a single device or system. Other types used for education demonstrate a range of circuits. These will include a solderless construction board of some type, such as: * Components mounted in plastic blocks with side contacts, that are held together in a base, e.g. Denshi blocks * Springs on a card board, the springs trap wire leads, or component leads, such as Philips EE electronic experiment kits. These are a cheap and flexible option * Professional type prototyping boards, (breadboards) into which component leads are inserted, following documentation of the "kit". The first type of kit for constructing a single device normally uses a PCB on which components are soldered. It normally comes with extensive documentation describing which component goes where on the PCB.…
Article summary
Lectron elements (Design Museum of Barcelona) Experimentation Kit An electronic kit is a package of electrical components used to build an electronic device. Generally, kits are composed of electronic components, a circuit diagram (schematic), assembly instructions, and often a printed circuit board (PCB) or another type of prototyping board. There are two types of kits. Some build a single device or system. Other types used for education demonstrate a range of circuits. These will include a solderless construction board of some type, such as: * Components mounted in plastic blocks with side contacts, that are held together in a base, e.g. Denshi blocks * Springs on a card board, the springs trap wire leads, or component leads, such as Philips EE electronic experiment kits. These are a cheap and flexible option * Professional type prototyping boards, (breadboards) into which component leads are inserted, following documentation of the "kit". The first type of kit for constructing a single device normally uses a PCB on which components are soldered. It normally comes with extensive documentation describing which component goes where on the PCB.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.