Electronic skin

Uses your system voice; voice and rate in settings.

Snapshot

≈ 7 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Electronic skin, also known as e-skin, refers to flexible, stretchable, and self-healing electronics that are able to mimic the functionalities of human or animal skin. This broad class of materials often contains sensing abilities, which are designed to reproduce the capabilities of human skin to respond to environmental factors such as changes in heat and pressure.

Advances in electronic skin research focus on the design of materials that should exhibit the following characteristics: high sensitivity/resolution, low thickness, conformability, flexibility and stretchability, durability and robustness, self-healing, biocompatibility, high spatial resolution, low power consumption and self-powered, sweat induction/analysis, and real-time data processing. Research in the individual fields of flexible electronics and tactile sensing has progressed significantly.

However, the field of electronic skin design aims to integrate advances from multiple areas of materials research without sacrificing the individual benefits derived from each field. The successful combination of flexible and stretchable mechanical properties with integrated sensors and self-healing capabilities would enable numerous applications, including soft robotics, prosthetics, artificial intelligence systems, and health monitoring devices.…

Electronic skin, also known as e-skin, refers to flexible, stretchable, and self-healing electronics that are able to mimic the functionalities of human or animal skin. This broad class of materials often contains sensing abilities, which are designed to reproduce the capabilities of human skin to respond to environmental factors such as changes in heat and pressure.

Advances in electronic skin research focus on the design of materials that should exhibit the following characteristics: high sensitivity/resolution, low thickness, conformability, flexibility and stretchability, durability and robustness, self-healing, biocompatibility, high spatial resolution, low power consumption and self-powered, sweat induction/analysis, and real-time data processing. Research in the individual fields of flexible electronics and tactile sensing has progressed significantly.

However, the field of electronic skin design aims to integrate advances from multiple areas of materials research without sacrificing the individual benefits derived from each field. The successful combination of flexible and stretchable mechanical properties with integrated sensors and self-healing capabilities would enable numerous applications, including soft robotics, prosthetics, artificial intelligence systems, and health monitoring devices.

Recent advances in the field of electronic skin have focused on incorporating green materials ideals and environmental awareness into the design process. As one of the main challenges facing electronic skin development is the ability of the material to withstand mechanical strain and maintain sensing ability or electronic properties, recyclability and self-healing properties are especially critical in the future design of new electronic skins.

Rehealable electronic skin

Self-healing abilities of electronic skin are critical to potential applications of electronic skin in fields such as soft robotics. Proper design of self-healing electronic skin requires not only healing of the base substrate but also the reestablishment of any sensing functions such as tactile sensing or electrical conductivity. Ideally, the self-healing process of electronic skin does not rely upon outside stimulation such as increased temperature, pressure, or solvation. Self-healing, or rehealable, electronic skin is often achieved through a polymer-based material or a hybrid material.

Polymer-based materials

In 2018, Zou et al. published work on electronic skin that is able to reform covalent bonds when damaged. The group looked at a polyimine-based crosslinked network, synthesized as seen in Figure 1. The e-skin is considered rehealable because of "reversible bond exchange," meaning that the bonds holding the network together are able to break and reform under certain conditions such as solvation and heating.

The rehealable and reusable aspect of such a thermoset material is unique because many thermoset materials irreversibly form crosslinked networks through covalent bonds. In the polymer network the bonds formed during the healing process are indistinguishable from the original polymer network. Dynamic non-covalent crosslinking has also been shown to form a polymer network that is rehealable. In 2016, Oh et al. looked specifically at semiconducting polymers for organic transistors.

They found that incorporating 2,6-pyridine dicarboxamide (PDCA) into the polymer backbone could impart self-healing abilities based on the network of hydrogen bonds formed between groups. With incorporation of PDCA in the polymer backbone, the materials was able to withstand up to 100% strain without showing signs of microscale cracking. In this example, the hydrogen bonds are available for energy dissipation as the strain increases.

Hybrid materials

Polymer networks are able to facilitate dynamic healing processes through hydrogen bonds or dynamic covalent chemistry. However, the incorporation of inorganic particles can greatly expand the functionality of polymer-based materials for electronic skin applications. The incorporation of micro-structured nickel particles into a polymer network (Figure 2) has been shown to maintain self-healing properties based on the reformation of hydrogen bonding networks around the inorganic particles.

The material is able to regain its conductivity within 15 seconds of breakage, and the mechanical properties are regained after 10 minutes at room temperature without added stimulus. This material relies on hydrogen bonds formed between urea groups when they align. The hydrogen atoms of urea functional groups are ideally situated to form a hydrogen-bonding network because they are near an electron-withdrawing carbonyl group.

This polymer network with embedded nickel particles demonstrates the possibility of using polymers as supramolecular hosts to develop self-healing conductive composites. Flexible and porous graphene foams that are interconnected in a 3D manner have also been shown to have self-healing properties. Thin film with poly(N,N-dimethylacrylamide)-poly(vinyl alcohol) (PDMAA) and reduced graphene oxide have shown high electrical conductivity and self-healing properties.

The healing abilities of the hybrid composite are suspected to be due to the hydrogen bonds between the PDMAA chains, and the healing process is able to restore initial length and recover conductive properties.

Tactile sensors

Applied pressure can be measured by monitoring changes in resistance or capacitance. Coplanar interdigitated electrodes embedded on single-layer graphene have been shown to provide pressure sensitivity for applied pressure as low as 0.11 kPa through measuring changes in capacitance. Piezoresistive sensors have also shown high levels of sensitivity. Ultrathin molybdenum disulfide sensing arrays integrated with graphene have demonstrated promising mechanical properties capable of pressure sensing.

Modifications of organic field-effect transistors (OFETs) have shown promise in electronic skin applications. Microstructured polydimethylsiloxane thin films can elastically deform when pressure is applied. The deformation of the thin film allows for storage and release of energy. Visual representation of applied pressure has been one area of interest in development of tactile sensors. The Bao Group at Stanford University have designed an electrochromically active electronic skin that changes color with different amounts of applied pressure.

Applied pressure can also be visualized by incorporation of active-matrix organic light-emitting diode displays which emit light when pressure is applied. Prototype e-skins include a printed synaptic transistor–based electronic skin giving skin-like haptic sensations and touch/pain-sensitivity to a robotic hand, and a multilayer tactile sensor repairable hydrogel-based robot skin.

Other sensing applications

Humidity sensors have been incorporated in electronic skin design with sulfurized tungsten films. The conductivity of the film changes with different levels of humidity. Silicon nanoribbons have also been studied for their application as temperature, pressure, and humidity sensors. Scientists at the University of Glasgow have made inroads in developing an e-skin that feels pain real-time, with applications in prosthetics and more life-like humanoids. A system of an electronic skin and a human-machine interface can enable remote sensed tactile perception and wearable or robotic sensing of many hazardous substances and pathogens.

See also

Artificial cell Artificial skin Artificial muscle Electronic nose Electronic tongue Robotic sensing Sensitive skin Soft robotics

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1369638426 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

7 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.