Electronic test equipment

7854 oscilloscope with curve tracer and time-domain reflectometer plug-ins.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

7854 oscilloscope with curve tracer and time-domain reflectometer plug-ins. Lower module is a mainframe of the series Tektronix TM500 and has a digital voltmeter, a digital counter, an old WWVB frequency standard receiver with phase comparator, and function generator. Electronic test equipment is used to create signals and capture responses from electronic devices under test (DUTs).

In this way, the proper operation of the DUT can be proven or faults in the device can be traced. Use of electronic test equipment is essential to any serious work on electronics systems.

Practical electronics engineering and assembly requires the use of many different kinds of electronic test equipment ranging from the very simple and inexpensive (such as a test light consisting of just a light bulb and a test lead) to extremely complex and sophisticated such as automatic test equipment (ATE). ATE often includes many of these instruments in real and simulated forms.

Generally, more advanced test gear is necessary when developing circuits and systems than is needed when doing production testing or when troubleshooting existing production units in the field.

Basic equipment

commercial digital voltmeter checking a prototype The following items are used for basic measurement of voltages, currents, and components in the circuit under test. Voltmeter (Measures voltage) Ohmmeter (Measures resistance) Ammeter, e.g. Galvanometer or Milliammeter (Measures current) Multimeter e.g., VOM (Volt-Ohm-Milliammeter) or DMM (Digital Multimeter) (Measures all of the above) LCR meter - inductance (L), capacitance (C) and resistance (R) meter (measure LCR values) The following are used for stimulus of the circuit under test: Power supplies Signal generator Digital pattern generator Pulse generator The following analyze the response of the circuit under test: Oscilloscope (Displays voltage as it changes over time) Frequency counter (Measures frequency) And connecting it all together: Test probes

Advanced or less commonly used equipment

Meters Solenoid voltmeter (Wiggy) Clamp meter (current transducer) Wheatstone bridge (Precisely measures resistance) Capacitance meter (Measures capacitance) LCR meter (Measures inductance, capacitance, resistance and combinations thereof) EMF Meter (Measures Electric and Magnetic Fields) Electrometer (Measures voltages, sometimes even tiny ones, via a charge effect)

Probes

RF probe Signal tracer

Analyzers

Logic analyzer (Tests digital circuits) Spectrum analyzer (SA) (Measures spectral energy of signals) Protocol analyzer (Tests functionality, performance and conformance of protocols) Vector signal analyzer (VSA) (Like the SA but it can also perform many more useful digital demodulation functions) Time-domain reflectometer (Tests integrity of long cables) Semiconductor curve tracer

Signal-generating devices

Signal generator usually distinguished by frequency range (e.g., audio or radio frequencies) or waveform type (e.g., sine, square, sawtooth, ramp, sweep, modulated, ...) Frequency synthesiser Function generator Digital pattern generator Pulse generator Signal injector

Miscellaneous devices

Boxcar averager Continuity tester Cable tester Hipot tester Network analyzer (used to characterize an electrical network of components) Test light Transistor tester Tube tester Source measure unit (SMU), a test tool capable to supply power and measure voltage or current at the same time.

Platforms

Series 4200 CVU Several modular electronic instrumentation platforms are currently in common use for configuring automated electronic test and measurement systems. These systems are widely employed for incoming inspection, quality assurance, and production testing of electronic devices and subassemblies.

Industry-standard communication interfaces link signal sources with measurement instruments in “rack-and-stack” or chassis-/mainframe-based systems, often under the control of a custom software application running on an external PC.

Test equipment switching

The addition of a high-speed switching system to a test system's configuration allows for faster, more cost-effective testing of multiple devices, and is designed to reduce both test errors and costs. Designing a test system's switching configuration requires an understanding of the signals to be switched and the tests to be performed, as well as the switching hardware form factors available.

See also

List of electrical and electronic measuring equipment Load pull, a colloquial term applied to the process of systematically varying the impedance presented to a device under test

LXI Consortium NIST’s 1588 Standard ICS Electronics. “GPIB 101A Tutorial About the GPIB Bus.”, Retrieved December 29, 2009. * [https://www.unitedtesting.com/ United Testing Systems Inc.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1345183217 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

7 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.