Electroreflectance

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Electroreflectance (also: electromodulated reflectance) is the change of reflectivity of a solid due to the influence of an electric field close to, or at the interface of the solid with a liquid. The change in reflectivity is most noticeable at very specific ranges of photon energy, corresponding to the band gaps at critical points of the Brillouin zone. The electroreflectance effect can be used to get a clearer picture of the band structure at critical points where there is a lot of near degeneracy.

Background

Normally, the band structure at critical points (points of special interest) has to be measured within a background of adsorption from non-critical points at the Brillouin zone boundary. Using a strong electric field, the adsorption spectrum can be changed to a spectrum that shows peaks at these critical points, essentially lifting the critical points from the background. The effect was first discovered and understood in semiconductor materials, but later research proved that metals also exhibit electroreflectance.

Impact

An early observation of the changing optical reflectivity of gold due to a present electric field was attributed to a change in refractive index of the neighboring liquid. However, it was shown that this could not be the case. The new conclusion was that the effect had to come from a modulation of the near-surface layer of the gold.

Electroreflectance (also: electromodulated reflectance) is the change of reflectivity of a solid due to the influence of an electric field close to, or at the interface of the solid with a liquid. The change in reflectivity is most noticeable at very specific ranges of photon energy, corresponding to the band gaps at critical points of the Brillouin zone. The electroreflectance effect can be used to get a clearer picture of the band structure at critical points where there is a lot of near degeneracy.

Normally, the band structure at critical points (points of special interest) has to be measured within a background of adsorption from non-critical points at the Brillouin zone boundary. Using a strong electric field, the adsorption spectrum can be changed to a spectrum that shows peaks at these critical points, essentially lifting the critical points from the background. The effect was first discovered and understood in semiconductor materials, but later research proved that metals also exhibit electroreflectance.

An early observation of the changing optical reflectivity of gold due to a present electric field was attributed to a change in refractive index of the neighboring liquid. However, it was shown that this could not be the case. The new conclusion was that the effect had to come from a modulation of the near-surface layer of the gold. The optical properties of semiconductors are directly related to the dielectric constant of the material.

This dielectric constant gives the ratio between the electric permeability of a material in relation to the permeability of a vacuum. The imaginary refractive index of a material is given by the square root of the dielectric constant. The reflectance R of a material can be calculated using the Fresnel equations. A present electric field alters the dielectric constant and therefore alters the optical properties of the material, like the reflectance.

The relaxation time we can write as \tau_d = \lambda_D^2/D with D being the Diffusion constant and \lambda_D the Debye length. The charging time can be expressed by \tau_c = \lambda_D L/D where L is the representative system size. The Debye length is often used as a measure of electric double layer thickness. Measuring the electric double layer with electroreflectance is challenging due to separation caused by conduction electrons.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1327879158 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

13 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.