Lesson plan
Electrostatic fieldmeter
An electrostatic fieldmeter, also called a static meter or electrostatic voltmeter is a tool used primarily in the static control industry for non-contact measurement of electrostatic fields and surface potentials. It detects the electric field strength (typically in volts per meter V/m or volts per inch V/in) generated by charged objects, which can indicate the magnitude and polarity of electrostatic charges. ;Operation Typically, electrostatic fieldmeters should be grounded to an ESD grounding/bonding reference point using a connecting point provided on the fieldmeter. Alternatively, some fieldmeters utilize conductive cases and can be grounded through the person holding the fieldmeter if the person utilizes a grounding wriststrap of other grounding method. Position the fieldmeter at the distance stipulated by the manufacturer. Many electrostatic fieldmeters are calibrated to measure from a distance of 1-inch or 25mm. Allow the measurement to stabilize for a few seconds. Fieldmeters typically utilize sensors that require measurement settling time when the field strength changes, which can be caused by moving the fieldmeter closer to or away from the measured surface or object.…
Article summary
An electrostatic fieldmeter, also called a static meter or electrostatic voltmeter is a tool used primarily in the static control industry for non-contact measurement of electrostatic fields and surface potentials. It detects the electric field strength (typically in volts per meter V/m or volts per inch V/in) generated by charged objects, which can indicate the magnitude and polarity of electrostatic charges. ;Operation Typically, electrostatic fieldmeters should be grounded to an ESD grounding/bonding reference point using a connecting point provided on the fieldmeter. Alternatively, some fieldmeters utilize conductive cases and can be grounded through the person holding the fieldmeter if the person utilizes a grounding wriststrap of other grounding method. Position the fieldmeter at the distance stipulated by the manufacturer. Many electrostatic fieldmeters are calibrated to measure from a distance of 1-inch or 25mm. Allow the measurement to stabilize for a few seconds. Fieldmeters typically utilize sensors that require measurement settling time when the field strength changes, which can be caused by moving the fieldmeter closer to or away from the measured surface or object.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.