Electrothermal feedback

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In electronics, electrothermal feedback is the interaction of the electric current and the temperature in a device with a temperature-dependent electrical resistance. This interaction arises from Joule heating. The temperature-dependence of the electrical resistance is described by the derivative of the resistance with respect to temperature dR/dT. Semiconductors typically exhibit a negative dR/dT. Superconductors exhibit a large positive dR/dT on the superconducting phase transition.

Normal (non-superconducting) metals typically exhibit a positive dR/dT that decreases to zero at very low temperatures. If a device has a positive dR/dT, an increase in temperature (for example, due to thermal fluctuations or the absorption of a photon) will increase the electrical resistance R. If the device is biased with a constant voltage V, this increase in resistance will decrease the Joule power P = V 2 /R. The decrease in Joule heating will cause the device to return to its equilibrium temperature.

This is known as negative electrothermal feedback, as the change in Joule heating opposes the change in temperature. If the device is instead biased with a constant current I, the Joule power P = I 2 R will increase if the temperature increases. Thus the Joule heating amplifies a change in temperature, an effect known as positive electrothermal feedback.…

In electronics, electrothermal feedback is the interaction of the electric current and the temperature in a device with a temperature-dependent electrical resistance. This interaction arises from Joule heating. The temperature-dependence of the electrical resistance is described by the derivative of the resistance with respect to temperature dR/dT. Semiconductors typically exhibit a negative dR/dT. Superconductors exhibit a large positive dR/dT on the superconducting phase transition.

Normal (non-superconducting) metals typically exhibit a positive dR/dT that decreases to zero at very low temperatures. If a device has a positive dR/dT, an increase in temperature (for example, due to thermal fluctuations or the absorption of a photon) will increase the electrical resistance R. If the device is biased with a constant voltage V, this increase in resistance will decrease the Joule power P = V 2 /R. The decrease in Joule heating will cause the device to return to its equilibrium temperature.

This is known as negative electrothermal feedback, as the change in Joule heating opposes the change in temperature. If the device is instead biased with a constant current I, the Joule power P = I 2 R will increase if the temperature increases. Thus the Joule heating amplifies a change in temperature, an effect known as positive electrothermal feedback. The situation is reversed for the case of a negative dR/dT.

Electrothermal feedback is important for describing the performance of several types of photodetectors such as the bolometer, the transition edge sensor, and the superconducting nanowire single-photon detector.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1221073807 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001221073807 · captured 1714234729.0 · version history

Cite this page as: encyclopegia.org, “Electrothermal feedback”, snapshot enwiki-001221073807. https://encyclopegia.org/a/electrothermal-feedback

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.