ellipse
≈ 46 min read
Names in other languages
- Englishellipse
- bselipsa
- Españolelipse
- euelipse
- lbEllips
- Polskielipsa
- qulump'u
- jvelips
- 中文椭圆
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
In mathematics, an ellipse is a plane curve surrounding two focal points, such that for all points on the curve, the sum of both distances to the two focal points is a constant. It generalizes a circle, which is the special type of ellipse in which the two focal points are the same. The elongation of an ellipse is measured by its eccentricity e , a number ranging from e = 0 (the limiting case of a circle) to e = 1 (the limiting case of infinite elongation, no longer an ellipse but a parabola).
An ellipse has a simple algebraic formula for its area, but for its perimeter (also known as circumference), integration is required to obtain the exact solution. The largest and smallest diameters of an ellipse, also known as its width and height, are typically denoted and . An ellipse has four extreme points: two vertices at the endpoints of the major axis and two co-vertices at the endpoints of the minor axis. Analytically, the equation of a standard ellipse centered at the origin is: \frac{x^2}{a^2}+\frac{y^2}{b^2} = 1 .
Assuming a \ge b , the foci are (\pm c, 0) , where c = \sqrt{a^2-b^2} (the linear eccentricity) is the distance from the center to a focus. The standard parametrization is: (x,y) = (a\cos(t),b\sin(t)) \quad \text{for} \quad 0\leq t\leq 2\pi. Ellipses are the closed type of conic section: a plane curve tracing the intersection of a cone with a plane (see figure).…
In mathematics, an ellipse is a plane curve surrounding two focal points, such that for all points on the curve, the sum of both distances to the two focal points is a constant. It generalizes a circle, which is the special type of ellipse in which the two focal points are the same. The elongation of an ellipse is measured by its eccentricity e , a number ranging from e = 0 (the limiting case of a circle) to e = 1 (the limiting case of infinite elongation, no longer an ellipse but a parabola).
An ellipse has a simple algebraic formula for its area, but for its perimeter (also known as circumference), integration is required to obtain the exact solution. The largest and smallest diameters of an ellipse, also known as its width and height, are typically denoted and . An ellipse has four extreme points: two vertices at the endpoints of the major axis and two co-vertices at the endpoints of the minor axis. Analytically, the equation of a standard ellipse centered at the origin is: \frac{x^2}{a^2}+\frac{y^2}{b^2} = 1 .
Assuming a \ge b , the foci are (\pm c, 0) , where c = \sqrt{a^2-b^2} (the linear eccentricity) is the distance from the center to a focus. The standard parametrization is: (x,y) = (a\cos(t),b\sin(t)) \quad \text{for} \quad 0\leq t\leq 2\pi. Ellipses are the closed type of conic section: a plane curve tracing the intersection of a cone with a plane (see figure). Ellipses have many similarities with the other two forms of conic sections, parabolas and hyperbolas, both of which are open and unbounded.
An angled cross section of a right circular cylinder is also an ellipse. An ellipse may also be defined in terms of one focal point and a line outside the ellipse called the directrix: for all points on the ellipse, the ratio between the distance to the focus and the distance to the directrix is a constant, called the eccentricity: e = \frac{c}{a} = \sqrt{1 - \frac{b^2}{a^2}}. Ellipses are common in physics, astronomy and engineering.
For example, the orbit of each planet in the Solar System is approximately an ellipse with the Sun at one focus point (more precisely, the focus is the barycenter of the Sun planet pair). The same is true for moons orbiting planets and all other systems of two astronomical bodies. The shapes of planets and stars are often well described by ellipsoids. A circle viewed from a side angle looks like an ellipse: that is, the ellipse is the image of a circle under parallel or perspective projection.
The ellipse is also the simplest Lissajous figure formed when the horizontal and vertical motions are sinusoids with the same frequency: a similar effect leads to elliptical polarization of light in optics. The name, ( , "omission"), was given by Apollonius of Perga in his Conics. The midpoint C of the line segment joining the foci is called the center of the ellipse. The line through the foci is called the major axis, and the line perpendicular to it through the center is the minor axis.
The major axis intersects the ellipse at two vertices V_1,V_2 , which have distance a to the center. The distance c of the foci to the center is called the focal distance or linear eccentricity. The quotient e = \tfrac{c}{a} is defined as the eccentricity. The case F_1 = F_2 yields a circle and is included as a special type of ellipse. The equation \left|PF_2\right| + \left|PF_1\right| = 2a can be viewed in a different way (see figure): c_2 is called the circular directrix (related to focus of the ellipse.
This property should not be confused with the definition of an ellipse using a directrix line below. Using Dandelin spheres, one can prove that any section of a cone with a plane is an ellipse, assuming the plane does not contain the apex and has slope less than that of the lines on the cone. For an arbitrary point (x,y) the distance to the focus (c,0) is \sqrt{(x - c)^2 + y^2 } and to the other focus \sqrt{(x + c)^2 + y^2} . Hence the point (x,\, y) is on the ellipse whenever: \sqrt{(x - c)^2 + y^2} + \sqrt{(x + c)^2 + y^2} = 2a\ .
Removing the radicals by suitable squarings and using b^2 = a^2-c^2 (see diagram) produces the standard equation of the ellipse: \frac{x^2}{a^2} + \frac{y^2}{b^2} = 1, or, solved for y: y = \pm\frac{b}{a}\sqrt{\vphantom{\left(a^2 - x^2\right)} a^2 - x^2} = \pm \sqrt{\left(a^2 - x^2\right)\left(1 - e^2\right)}. The width and height parameters a,\; b are called the semi-major and semi-minor axes. The top and bottom points V_3 = (0,\, b),\; V_4 = (0,\, -b) are the co-vertices.
The distances from a point (x,\, y) on the ellipse to the left and right foci are a + ex and a - ex . It follows from the equation that the ellipse is symmetric with respect to the coordinate axes and hence with respect to the origin. In principle, the canonical ellipse equation \tfrac{x^2}{a^2} + \tfrac{y^2}{b^2} = 1 may have a (and hence the ellipse would be taller than it is wide). This form can be converted to the standard form by transposing the variable names x and y and the parameter names a and b.
This is the distance from the center to a focus: c = \sqrt{a^2 - b^2} . e = \frac{c}{a} = \sqrt{1 - \left(\frac{b}{a}\right)^2}, assuming a > b. An ellipse with equal axes ( a = b ) has zero eccentricity, and is a circle. \ell = \frac{b^2}a = a \left(1 - e^2\right). The semi-latus rectum \ell is equal to the radius of curvature at the vertices (see section curvature). An arbitrary line g intersects an ellipse at 0, 1, or 2 points, respectively called an exterior line, tangent and secant. Through any point of an ellipse there is a unique tangent.
The tangent at a point (x_1,\, y_1) of the ellipse \tfrac{x^2}{a^2} + \tfrac{y^2}{b^2} = 1 has the coordinate equation: \frac{x_1}{a^2}x + \frac{y_1}{b^2}y = 1. A vector parametric equation of the tangent is: \vec x = \begin{pmatrix} x_1 \\ y_1 \end{pmatrix} + s \left(\begin{array}{r} -y_1 a^2 \\ x_1 b^2 \end{array}\right) , \quad s \in \R. Proof: Let (x_1,\, y_1) be a point on an ellipse and \vec{x} = \begin{pmatrix} x_1 \\ y_1 \end{pmatrix} + s \begin{pmatrix} u \\ v \end{pmatrix} be the equation of any line g containing (x_1,\, y_1) .
Inserting the line's equation into the ellipse equation and respecting \frac{x_1^2}{a^2} + \frac{y_1^2}{b^2} = 1 yields: \frac{\left(x_1 + su\right)^2}{a^2} + \frac{\left(y_1 + sv\right)^2}{b^2} = 1\ \quad\Longrightarrow\quad 2s\left(\frac{x_1u}{a^2} + \frac{y_1v}{b^2}\right) + s^2\left(\frac{u^2}{a^2} + \frac{v^2}{b^2}\right) = 0\ . There are then cases: \frac{x_1}{a^2}u + \frac{y_1}{b^2}v = 0. Then line g and the ellipse have only point (x_1,\, y_1) in common, and g is a tangent.
The tangent direction has perpendicular vector \begin{pmatrix} \frac{x_1}{a^2} & \frac{y_1}{b^2} \end{pmatrix} , so the tangent line has equation \frac{x_1}{a^2}x + \tfrac{y_1}{b^2}y = k for some k . Because (x_1,\, y_1) is on the tangent and the ellipse, one obtains k = 1 . \frac{x_ 1}{a^2}u + \frac{y_1}{b^2}v \ne 0. Then line g has a second point in common with the ellipse, and is a secant. Using (1) one finds that \begin{pmatrix} -y_1 a^2 & x_1 b^2 \end{pmatrix} is a tangent vector at point (x_1,\, y_1) , which proves the vector equation.
If (x_1, y_1) and (u, v) are two points of the ellipse such that \frac{x_1u}{a^2} + \tfrac{y_1v}{b^2} = 0 , then the points lie on two conjugate diameters (see below). (If a = b , the ellipse is a circle and "conjugate" means "orthogonal".) \frac{\left(x - x_\circ\right)^2}{a^2} + \frac{\left(y - y_\circ\right)^2}{b^2} = 1 \ . The axes are still parallel to the x- and y-axes.
Ax^2 + Bxy + Cy^2 + Dx + Ey + F = 0 provided B^2 - 4AC To distinguish the degenerate cases from the non-degenerate case, let ∆ be the determinant \Delta = \begin{vmatrix} A & \frac{1}{2}B & \frac{1}{2}D \\ \frac{1}{2}B & C & \frac{1}{2}E \\ \frac{1}{2}D & \frac{1}{2}E & F \end{vmatrix} = ACF + \tfrac14 BDE - \tfrac14(AE^2 + CD^2 + FB^2). Then the ellipse is a non-degenerate real ellipse if and only if C∆ 0, we have an imaginary ellipse, and if ∆ = 0, we have a point ellipse.
The general equation's coefficients can be obtained from known semi-major axis a , semi-minor axis b , center coordinates \left(x_\circ,\, y_\circ\right) , and rotation angle \theta (the angle from the positive horizontal axis to the ellipse's major axis) using the formulae: \begin{align} A &= a^2 \sin^2\theta + b^2 \cos^2\theta & B &= 2\left(b^2 - a^2\right) \sin\theta \cos\theta \\[1ex] C &= a^2 \cos^2\theta + b^2 \sin^2\theta & D &= -2A x_\circ - B y_\circ \\[1ex] E &= - B x_\circ - 2C y_\circ & F &= A x_\circ^2 + B x_\circ y_\circ + C y_\circ^2 - a^2 b^2. \end{align} These expressions can be derived from the canonical equation \frac{X^2}{a^2} + \frac{Y^2}{b^2} = 1 by a Euclidean transformation of the coordinates (X,\, Y) : \begin{align} X &= \left(x - x_\circ\right) \cos\theta + \left(y - y_\circ\right) \sin\theta, \\ Y &= -\left(x - x_\circ\right) \sin\theta + \left(y - y_\circ\right) \cos\theta. \end{align} Conversely, the canonical form parameters can be obtained from the general-form coefficients by the equations: \begin{align} a, b &= \frac{-\sqrt{2 \big(A E^2 + C D^2 - B D E + (B^2 - 4 A C) F\big)\big((A + C) \pm \sqrt{(A - C)^2 + B^2}\big)}}{B^2 - 4 A C}, \\ x_\circ &= \frac{2CD - BE}{B^2 - 4AC}, \\[5mu] y_\circ &= \frac{2AE - BD}{B^2 - 4AC}, \\[5mu] \theta &= \tfrac12 \operatorname{atan2}(-B,\, C-A), \end{align} where is the 2-argument arctangent function.
Standard parametric representation
Using trigonometric functions, a parametric representation of the standard ellipse \tfrac{x^2}{a^2}+\tfrac{y^2}{b^2} = 1 is: (x,\, y) = (a \cos t,\, b \sin t),\ 0 \le t The parameter t (called the eccentric anomaly in astronomy) is not the angle of (x(t),y(t)) with the x-axis, but has a geometric meaning due to Philippe de La Hire (see below).
Rational representation
With the substitution u = \tan\left(\frac{t}{2}\right) and trigonometric formulae one obtains \cos t = \frac{1 - u^2}{1 + u^2}\ ,\quad \sin t = \frac{2u}{1 + u^2} and the rational parametric equation of an ellipse \begin{cases} x(u) = a \, \dfrac{1 - u^2}{1 + u^2} \\[10mu] y(u) = b \, \dfrac{2u}{1 + u^2} \\[10mu] -\infty which covers any point of the ellipse \tfrac{x^2}{a^2} + \tfrac{y^2}{b^2} = 1 except the left vertex (-a,\, 0) .
For u \in [0,\, 1], this formula represents the right upper quarter of the ellipse moving counter-clockwise with increasing u. The left vertex is the limit \lim_{u \to \pm \infty} (x(u),\, y(u)) = (-a,\, 0)\;. Alternately, if the parameter [u:v] is considered to be a point on the real projective line \mathbf{P}(\mathbf{R}) , then the corresponding rational parametrization is [u:v] \mapsto \left(a\frac{v^2 - u^2}{v^2 + u^2}, b\frac{2uv}{v^2 + u^2} \right). Then [1:0] \mapsto (-a,\, 0).
Rational representations of conic sections are commonly used in computer-aided design (see Bézier curve).
Tangent slope as parameter
A parametric representation, which uses the slope m of the tangent at a point of the ellipse can be obtained from the derivative of the standard representation \vec x(t) = (a \cos t,\, b \sin t) : \vec x'(t) = (-a\sin t,\, b\cos t) \quad \rightarrow \quad m = -\frac{b}{a}\cot t\quad \rightarrow \quad \cot t = -\frac{ma}{b}. With help of trigonometric formulae one obtains: \cos t = \frac{\cot t}{\pm\sqrt{1 + \cot^2t}} = \frac{-ma}{\pm\sqrt{m^2 a^2 + b^2}}\ ,\quad\quad \sin t = \frac{1}{\pm\sqrt{1 + \cot^2t}} = \frac{b}{\pm\sqrt{m^2 a^2 + b^2}}.
Replacing \cos t and \sin t of the standard representation yields: \vec c_\pm(m) = \left(-\frac{ma^2}{\pm\sqrt{m^2 a^2 + b^2}},\;\frac{b^2}{\pm\sqrt{m^2a^2 + b^2}}\right),\, m \in \R. Here m is the slope of the tangent at the corresponding ellipse point, \vec c_+ is the upper and \vec c_- the lower half of the ellipse. The vertices (\pm a,\, 0) , having vertical tangents, are not covered by the representation. The equation of the tangent at point \vec c_\pm(m) has the form y = mx + n .
The still unknown n can be determined by inserting the coordinates of the corresponding ellipse point \vec c_\pm(m) : y = mx \pm \sqrt{m^2 a^2 + b^2}\, . This description of the tangents of an ellipse is an essential tool for the determination of the orthoptic of an ellipse. The orthoptic article contains another proof, without differential calculus and trigonometric formulae.
General ellipse
Another definition of an ellipse uses affine transformations: Any ellipse is an affine image of the unit circle with equation x^2 + y^2 = 1 . Parametric representation An affine transformation of the Euclidean plane has the form \vec x \mapsto \vec f\!_0 + A\vec x , where A is a regular matrix (with non-zero determinant) and \vec f\!_0 is an arbitrary vector.
If \vec f\!_1, \vec f\!_2 are the column vectors of the matrix A , the unit circle (\cos(t), \sin(t)) , 0 \leq t \leq 2\pi , is mapped onto the ellipse: \vec x = \vec p(t) = \vec f\!_0 + \vec f\!_1 \cos t + \vec f\!_2 \sin t \, . Here \vec f\!_0 is the center and \vec f\!_1,\; \vec f\!_2 are the directions of two conjugate diameters, in general not perpendicular.
Vertices The four vertices of the ellipse are \vec p(t_0),\;\vec p\left(t_0 \pm \tfrac{\pi}{2}\right),\; \vec p\left(t_0 + \pi\right) , for a parameter t = t_0 defined by: \cot (2t_0) = \frac{\vec f\!_1^{\,2} - \vec f\!_2^{\,2}}{2\vec f\!_1 \cdot \vec f\!_2}. (If \vec f\!_1 \cdot \vec f\!_2 = 0 , then t_0 = 0 .) This is derived as follows. The tangent vector at point \vec p(t) is: \vec p\,'(t) = -\vec f\!_1\sin t + \vec f\!_2\cos t \ .
At a vertex parameter t = t_0 , the tangent is perpendicular to the major/minor axes, so: 0 = \vec p'(t) \cdot \left(\vec p(t) -\vec f\!_0\right) = \left(-\vec f\!_1\sin t + \vec f\!_2\cos t\right) \cdot \left(\vec f\!_1 \cos t + \vec f\!_2 \sin t\right). Expanding and applying the identities \; \cos^2 t -\sin^2 t=\cos 2t,\ \ 2\sin t \cos t = \sin 2t\; gives the equation for t = t_0\; .
Area From Apollonios theorem (see below) one obtains: The area of an ellipse \;\vec x = \vec f_0 +\vec f_1 \cos t +\vec f_2 \sin t\; is A=\pi \left|\det(\vec f_1, \vec f_2)\right| . Semiaxes With the abbreviations \; M=\vec f_1^2+\vec f_2^2, \ N = \left|\det(\vec f_1,\vec f_2)\right| the statements of Apollonios's theorem can be written as: a^2+b^2=M, \quad ab=N \ .
Solving this nonlinear system for a,b yields the semiaxes: \begin{align} a &= \frac{1}{2}(\sqrt{M+2N}+\sqrt{M-2N}) \\[1ex] b &= \frac{1}{2}(\sqrt{M+2N}-\sqrt{M-2N})\, . \end{align} Implicit representation Solving the parametric representation for \; \cos t,\sin t\; by Cramer's rule and using \;\cos^2t+\sin^2t -1=0\; , one obtains the implicit representation \det{\left(\vec x\!-\!\vec f\!_0,\vec f\!_2\right)^2} + \det{\left(\vec f\!_1,\vec x\!-\!\vec f\!_0\right)^2} - \det{\left(\vec f\!_1,\vec f\!_2\right)^2} = 0.
Conversely: If the equation x^2+2cxy+d^2y^2-e^2=0\ , with \; d^2-c^2 >0 \; , of an ellipse centered at the origin is given, then the two vectors \vec f_1={e \choose 0},\quad \vec f_2=\frac{e}{\sqrt{d^2-c^2}}{-c\choose 1} point to two conjugate points and the tools developed above are applicable. Example: For the ellipse with equation \;x^2+2xy+3y^2-1=0\; the vectors are \vec f_1={1 \choose 0},\quad \vec f_2=\frac{1}{\sqrt{2}}{-1\choose 1} . of points where the ellipses are especially close to each other.
Rotated standard ellipse For \vec f_0= {0\choose 0},\;\vec f_1= a {\cos \theta\choose \sin \theta},\;\vec f_2= b{-\sin \theta\choose \;\cos \theta} one obtains a parametric representation of the standard ellipse rotated by angle \theta : \begin{align} x &= x_\theta(t) = a\cos\theta\cos t - b\sin\theta\sin t \, , \\ y &= y_\theta(t) = a\sin\theta\cos t + b\cos\theta\sin t \, . \end{align} Ellipse in space The definition of an ellipse in this section gives a parametric representation of an arbitrary ellipse, even in space, if one allows \vec f\!_0, \vec f\!_1, \vec f\!_2 to be vectors in space. r(\theta) = \frac{ab}{\sqrt{(b \cos \theta)^2 + (a\sin \theta)^2}}=\frac{b}{\sqrt{1 - (e\cos\theta)^2}} where e is the eccentricity (not Euler's number).
If instead we use polar coordinates with the origin at one focus, with the angular coordinate \theta = 0 still measured from the major axis, the ellipse's equation is r(\theta)=\frac{a (1-e^2)}{1\pm e\cos\theta } where the sign in the denominator is negative if the reference direction \theta = 0 points towards the center (as illustrated on the right), and positive if that direction points away from the center. The angle \theta is called the true anomaly of the point. The numerator \ell=a (1-e^2) is the semi-latus rectum.
Eccentricity and the directrix property
Each of the two lines parallel to the minor axis, and at a distance of d = \frac{a^2}{c} = \frac{a}{e} from it, is called a directrix of the ellipse (see diagram). For an arbitrary point P of the ellipse, the quotient of the distance to one focus and to the corresponding directrix (see diagram) is equal to the eccentricity: \frac{\left|PF_1\right|}{\left|Pl_1\right|} = \frac{\left|PF_2\right|}{\left|Pl_2\right|} = e = \frac{c}{a}\ .
The proof for the pair F_1, l_1 follows from the fact that \left|PF_1\right|^2 = (x - c)^2 + y^2,\ \left|Pl_1\right|^2 = \left(x - \tfrac{a^2}{c}\right)^2 and y^2 = b^2 - \tfrac{b^2}{a^2}x^2 satisfy the equation \left|PF_1\right|^2 - \frac{c^2}{a^2}\left|Pl_1\right|^2 = 0\, . The second case is proven analogously.
The converse is also true and can be used to define an ellipse (in a manner similar to the definition of a parabola): For any point F (focus), any line l (directrix) not through F , and any real number e with 0 the ellipse is the locus of points for which the quotient of the distances to the point and to the line is e, that is: E = \left\{P\ \left|\ \frac = e\right.\right\}. The extension to e = 0 , which is the eccentricity of a circle, is not allowed in this context in the Euclidean plane.
However, one may consider the directrix of a circle to be the line at infinity in the projective plane. (The choice e = 1 yields a parabola, and if e > 1 , a hyperbola.) Proof Let F = (f,\, 0),\ e > 0 , and assume (0,\, 0) is a point on the curve. The directrix l has equation x = -\tfrac{f}{e} . With P = (x,\, y) , the relation |PF|^2 = e^2|Pl|^2 produces the equations (x - f)^2 + y^2 = e^2\left(x + \frac{f}{e}\right)^2 = (ex + f)^2 and x^2\left(e^2 - 1\right) + 2xf(1 + e) - y^2 = 0.
The substitution p = f(1 + e) yields x^2\left(e^2 - 1\right) + 2px - y^2 = 0. This is the equation of an ellipse ( e ), or a parabola ( e = 1 ), or a hyperbola ( e > 1 ). All of these non-degenerate conics have, in common, the origin as a vertex (see diagram).
If e , introduce new parameters a,\, b so that 1 - e^2 = \tfrac{b^2}{a^2}, \text{ and }\ p = \tfrac{b^2}{a} , and then the equation above becomes \frac{(x - a)^2}{a^2} + \frac{y^2}{b^2} = 1\, , which is the equation of an ellipse with center (a,\, 0) , the x-axis as major axis, and the major/minor semi axis a,\, b . Construction of a directrix Because of c\cdot\tfrac{a^2}{c}=a^2 point L_1 of directrix l_1 (see diagram) and focus F_1 are inverse with respect to the circle inversion at circle x^2+y^2=a^2 (in diagram green).
Hence L_1 can be constructed as shown in the diagram. Directrix l_1 is the perpendicular to the main axis at point L_1 . General ellipse If the focus is F = \left(f_1,\, f_2\right) and the directrix ux + vy + w = 0 , one obtains the equation \left(x - f_1\right)^2 + \left(y - f_2\right)^2 = e^2 \frac{\left(ux + vy + w\right)^2}{u^2 + v^2}\ .
(The right side of the equation uses the Hesse normal form of a line to calculate the distance |Pl| .) Let L be the point on the line \overline{PF_2} with distance 2a to the focus F_2 , where a is the semi-major axis of the ellipse. Let line w be the external angle bisector of the lines \overline{PF_1} and \overline{PF_2}. Take any other point Q on w. By the triangle inequality and the angle bisector theorem, 2a = \left|LF_2\right| \left|QF_2\right| + \left|QL\right| = {} \left|QF_2\right| + \left|QF_1\right|, so Q must be outside the ellipse.
As this is true for every choice of Q, w only intersects the ellipse at the single point P so must be the tangent line. Application The rays from one focus are reflected by the ellipse to the second focus. This property has optical and acoustic applications similar to the reflective property of a parabola (see whispering gallery). It also serves to formulate Alhazen's problem of reflection on a circle tangent to the ellipse.
Additionally, because of the focus-to-focus reflection property of ellipses, if the rays are allowed to continue propagating, reflected rays will eventually align closely with the major axis. \vec x = \vec p(t) = \vec f\!_0 +\vec f\!_1 \cos t + \vec f\!_2 \sin t, any pair of points \vec p(t),\ \vec p(t + \pi) belong to a diameter, and the pair \vec p\left(t + \tfrac{\pi}{2}\right),\ \vec p\left(t - \tfrac{\pi}{2}\right) belong to its conjugate diameter.
For the common parametric representation (a\cos t,b\sin t) of the ellipse with equation \tfrac{x^2}{a^2}+\tfrac{y^2}{b^2}=1 one gets: The points (x_1,y_1)=(\pm a\cos t,\pm b\sin t)\quad (signs: (+,+) or (−,−) ) (x_2,y_2)=({\color{red}{\mp}} a\sin t,\pm b\cos t)\quad (signs: (−,+) or (+,−) ) are conjugate and \frac{x_1x_2}{a^2}+\frac{y_1y_2}{b^2}=0\ . In case of a circle the last equation collapses to x_1x_2+y_1y_2=0\ . c_1^2 + c_2^2 = a^2 + b^2 .
The triangle O,P_1,P_2 with sides c_1,\, c_2 (see diagram) has the constant area A_\Delta = \frac{1}{2}ab , which can be expressed by A_\Delta=\tfrac 1 2 c_2d_1=\tfrac 1 2 c_1c_2\sin\alpha , too. d_1 is the altitude of point P_1 and \alpha the angle between the half diameters. Hence the area of the ellipse (see section metric properties) can be written as A_{el}=\pi ab=\pi c_2d_1=\pi c_1c_2\sin\alpha . The parallelogram of tangents adjacent to the given conjugate diameters has the \text{Area}_{12} = 4ab\ .
Proof: Let the ellipse be in the canonical form with parametric equation \vec p(t) = (a\cos t,\, b\sin t). The two points \vec c_1 = \vec p(t),\ \vec c_2 = \vec p\left(t + \frac{\pi}{2}\right) are on conjugate diameters (see previous section). From trigonometric formulae one obtains \vec c_2 = (-a\sin t,\, b\cos t)^\mathsf{T} and \left|\vec c_1\right|^2 + \left|\vec c_2\right|^2 = \cdots = a^2 + b^2\, .
The area of the triangle generated by \vec c_1,\, \vec c_2 is A_\Delta = \tfrac{1}{2} \det\left(\vec c_1,\, \vec c_2\right) = \cdots = \tfrac{1}{2}ab and from the diagram it can be seen that the area of the parallelogram is 8 times that of A_\Delta . Hence \text{Area}_{12} = 4ab\, . For the ellipse \tfrac{x^2}{a^2} + \tfrac{y^2}{b^2} = 1 the intersection points of orthogonal tangents lie on the circle x^2 + y^2 = a^2 + b^2 . This circle is called orthoptic or director circle of the ellipse (not to be confused with the circular directrix defined above).
Pins-and-string method
The characterization of an ellipse as the locus of points so that sum of the distances to the foci is constant leads to a method of drawing one using two drawing pins, a length of string, and a pencil. In this method, pins are pushed into the paper at two points, which become the ellipse's foci. A string is tied at each end to the two pins; its length after tying is 2a . The tip of the pencil then traces an ellipse if it is moved while keeping the string taut.
Using two pegs and a rope, gardeners use this procedure to outline an elliptical flower bed—thus it is called the gardener's ellipse. The Byzantine architect Anthemius of Tralles ( ) described how this method could be used to construct an elliptical reflector, and it was elaborated in a now-lost 9th-century treatise by Al-Ḥasan ibn Mūsā. A similar method for drawing confocal ellipses with a closed string is due to the Irish bishop Charles Graves. (a\cos t,\, b\sin t) This representation can be modeled technically by two simple methods.
In both cases center, the axes and semi axes a,\, b have to be known. Method 1 The first method starts with a strip of paper of length a + b . The point, where the semi axes meet is marked by P . If the strip slides with both ends on the axes of the desired ellipse, then point P traces the ellipse. For the proof one shows that point P has the parametric representation (a\cos t,\, b\sin t) , where parameter t is the angle of the slope of the paper strip.
A technical realization of the motion of the paper strip can be achieved by a Tusi couple (see animation). The device is able to draw any ellipse with a fixed sum a + b , which is the radius of the large circle. This restriction may be a disadvantage in real life. More flexible is the second paper strip method. A variation of the paper strip method 1 uses the observation that the midpoint N of the paper strip is moving on the circle with center M (of the ellipse) and radius \tfrac{a + b}{2} .
Hence, the paperstrip can be cut at point N into halves, connected again by a joint at N and the sliding end K fixed at the center M (see diagram). After this operation the movement of the unchanged half of the paperstrip is unchanged. This variation requires only one sliding shoe. Method 2: The second method starts with a strip of paper of length a . One marks the point, which divides the strip into two substrips of length b and a - b . The strip is positioned onto the axes as described in the diagram.
Then the free end of the strip traces an ellipse, while the strip is moved. For the proof, one recognizes that the tracing point can be described parametrically by (a\cos t,\, b\sin t) , where parameter t is the angle of slope of the paper strip. This method is the base for several ellipsographs (see section below). Similar to the variation of the paper strip method 1 a variation of the paper strip method 2 can be established (see diagram) by cutting the part between the axes into halves.
Most ellipsograph drafting instruments are based on the second paperstrip method. The diagram shows an easy way to find the centers of curvature C_1 = \left(a - \tfrac{b^2}{a}, 0\right),\, C_3 = \left(0, b - \tfrac{a^2}{b}\right) at vertex V_1 and co-vertex V_3 , respectively: mark the auxiliary point H = (a,\, b) and draw the line segment V_1 V_3\ , draw the line through H , which is perpendicular to the line V_1 V_3\ , the intersection points of this line with the axes are the centers of the osculating circles.
(proof: simple calculation.) The centers for the remaining vertices are found by symmetry. With help of a French curve one draws a curve, which has smooth contact to the osculating circles. For the generation of points of the ellipse \tfrac{\vphantom{y^2} x^2}{a^2} + \tfrac{y^2}{b^2} = 1 one uses the pencils at the vertices V_1,\, V_2 . Let P = (0,\, b) be an upper co-vertex of the ellipse and A = (-a,\, 2b),\, B = (a,\,2b) . P is the center of the rectangle V_1,\, V_2,\, B,\, A .
The side \overline{AB} of the rectangle is divided into n equal spaced line segments and this division is projected parallel with the diagonal AV_2 as direction onto the line segment \overline{V_1B} and assign the division as shown in the diagram. The parallel projection together with the reverse of the orientation is part of the projective mapping between the pencils at V_1 and V_2 needed. The intersection points of any two related lines V_1 B_i and V_2 A_i are points of the uniquely defined ellipse.
With help of the points C_1,\, \dotsc the points of the second quarter of the ellipse can be determined. Analogously one obtains the points of the lower half of the ellipse. Steiner generation can also be defined for hyperbolas and parabolas. It is sometimes called a parallelogram method because one can use other points rather than the vertices, which starts with a parallelogram instead of a rectangle. with R = 2r The ellipse is a special case of the hypotrochoid when R = 2r , as shown in the adjacent image.
The special case of a moving circle with radius r inside a circle with radius R = 2r is called a Tusi couple. A circle with equation \left(x - x_\circ\right)^2 + \left(y - y_\circ\right)^2 = r^2 is uniquely determined by three points \left(x_1, y_1\right),\; \left(x_2,\,y_2\right),\; \left(x_3,\, y_3\right) not on a line.
A simple way to determine the parameters x_\circ,y_\circ,r uses the inscribed angle theorem for circles: For four points P_i = \left(x_i,\, y_i\right),\ i = 1,\, 2,\, 3,\, 4,\, (see diagram) the following statement is true: The four points are on a circle if and only if the angles at P_3 and P_4 are equal.
Usually one measures inscribed angles by a degree or radian θ, but here the following measurement is more convenient: In order to measure the angle between two lines with equations y = m_1x + d_1,\ y = m_2x + d_2,\ m_1 \ne m_2, one uses the quotient: \frac{1 + m_1 m_2}{m_2 - m_1} = \cot\theta\ .
Inscribed angle theorem for circles
For four points P_i = \left(x_i,\, y_i\right),\ i = 1,\, 2,\, 3,\, 4,\, no three of them on a line, we have the following (see diagram): The four points are on a circle, if and only if the angles at P_3 and P_4 are equal. In terms of the angle measurement above, this means: \frac{(x_4 - x_1)(x_4 - x_2) + (y_4 - y_1)(y_4 - y_2)} {(y_4 - y_1)(x_4 - x_2) - (y_4 - y_2)(x_4 - x_1)} = \frac{(x_3 - x_1)(x_3 - x_2) + (y_3 - y_1)(y_3 - y_2)} {(y_3 - y_1)(x_3 - x_2) - (y_3 - y_2)(x_3 - x_1)}. At first the measure is available only for chords not parallel to the y-axis, but the final formula works for any chord.
Three-point form of circle equation
As a consequence, one obtains an equation for the circle determined by three non-collinear points P_i = \left(x_i,\, y_i\right) : \frac{({\color{red}x} - x_1)({\color{red}x} - x_2) + ({\color{red}y} - y_1)({\color{red}y} - y_2)} {({\color{red}y} - y_1)({\color{red}x} - x_2) - ({\color{red}y} - y_2)({\color{red}x} - x_1)} = \frac{(x_3 - x_1)(x_3 - x_2) + (y_3 - y_1)(y_3 - y_2)} {(y_3 - y_1)(x_3 - x_2) - (y_3 - y_2)(x_3 - x_1)}.
For example, for P_1 = (2,\, 0),\; P_2 = (0,\, 1),\; P_3 = (0,\,0) the three-point equation is: \frac{(x - 2)x + y(y - 1)}{yx - (y - 1)(x - 2)} = 0 , which can be rearranged to (x - 1)^2 + \left(y - \tfrac{1}{2}\right)^2 = \tfrac{5}{4}\ .
Using vectors, dot products and determinants this formula can be arranged more clearly, letting \vec x = (x,\, y) : \frac{\left({\color{red}\vec x} - \vec x_1\right) \cdot \left({\color{red}\vec x} - \vec x_2\right)} {\det\left({\color{red}\vec x} - \vec x_1,{\color{red}\vec x} - \vec x_2\right)} = \frac{\left(\vec x_3 - \vec x_1\right) \cdot \left(\vec x_3 - \vec x_2\right)} {\det\left(\vec x_3 - \vec x_1, \vec x_3 - \vec x_2\right)}.
The center of the circle \left(x_\circ,\, y_\circ\right) satisfies: \begin{bmatrix} 1 & \dfrac{y_1 - y_2}{x_1 - x_2} \\[2ex] \dfrac{x_1 - x_3}{y_1 - y_3} & 1 \end{bmatrix} \begin{bmatrix} x_\circ \\[1ex] y_\circ \end{bmatrix} = \begin{bmatrix} \dfrac{x_1^2 - x_2^2 + y_1^2 - y_2^2}{2(x_1 - x_2)} \\[2ex] \dfrac{y_1^2 - y_3^2 + x_1^2 - x_3^2}{2(y_1 - y_3)} \end{bmatrix}.
The radius is the distance between any of the three points and the center. r = \sqrt{\left(x_1 - x_\circ\right)^2 + \left(y_1 - y_\circ\right)^2} This section considers the family of ellipses defined by equations \tfrac{\left(x - x_\circ\right)^2}{a^2} + \tfrac{\left(y - y_\circ\right)^2}{b^2} = 1 with a fixed eccentricity e .
It is convenient to use the parameter: {\color{blue}q} = \frac{a^2}{b^2} = \frac{1}{1 - e^2}, and to write the ellipse equation as: \left(x - x_\circ\right)^2 + {\color{blue}q}\, \left(y - y_\circ\right)^2 = a^2, where q is fixed and x_\circ,\, y_\circ,\, a vary over the real numbers. (Such ellipses have their axes parallel to the coordinate axes: if q , the major axis is parallel to the x-axis; if q > 1 , it is parallel to the y-axis.) Like a circle, such an ellipse is determined by three points not on a line.
For this family of ellipses, one introduces the following q-analog angle measure, which is not a function of the usual angle measure θ: In order to measure an angle between two lines with equations y = m_1x + d_1,\ y = m_2x + d_2,\ m_1 \ne m_2 one uses the quotient: \frac{1 + {\color{blue}q}\; m_1 m_2}{m_2 - m_1}\ .
Inscribed angle theorem for ellipses
Given four points P_i = \left(x_i,\, y_i\right),\ i = 1,\, 2,\, 3,\, 4 , no three of them on a line (see diagram). The four points are on an ellipse with equation (x - x_\circ)^2 + {\color{blue}q}\, (y - y_\circ)^2 = a^2 if and only if the angles at P_3 and P_4 are equal in the sense of the measurement above—that is, if \frac{(x_4 - x_1)(x_4 - x_2) + {\color{blue}q}\;(y_4 - y_1)(y_4 - y_2)} {(y_4 - y_1)(x_4 - x_2) - (y_4 - y_2)(x_4 - x_1)} = \frac{(x_3 - x_1)(x_3 - x_2) + {\color{blue}q}\;(y_3 - y_1)(y_3 - y_2)} {(y_3 - y_1)(x_3 - x_2) - (y_3 - y_2)(x_3 - x_1)}\ . At first the measure is available only for chords which are not parallel to the y-axis. But the final formula works for any chord. The proof follows from a straightforward calculation. For the direction of proof given that the points are on an ellipse, one can assume that the center of the ellipse is the origin.
Three-point form of ellipse equation
A consequence, one obtains an equation for the ellipse determined by three non-collinear points P_i = \left(x_i,\, y_i\right) : \frac{({\color{red}x} - x_1)({\color{red}x} - x_2) + {\color{blue}q}\;({\color{red}y} - y_1)({\color{red}y} - y_2)} {({\color{red}y} - y_1)({\color{red}x} - x_2) - ({\color{red}y} - y_2)({\color{red}x} - x_1)} = \frac{(x_3 - x_1)(x_3 - x_2) + {\color{blue}q}\;(y_3 - y_1)(y_3 - y_2)} {(y_3 - y_1)(x_3 - x_2) - (y_3 - y_2)(x_3 - x_1)}\ .
For example, for P_1 = (2,\, 0),\; P_2 = (0,\,1),\; P_3 = (0,\, 0) and q = 4 one obtains the three-point form \frac{(x - 2)x + 4y(y - 1)}{yx - (y - 1)(x - 2)} = 0 and after conversion \frac{(x - 1)^2}{2} + \frac{\left(y - \frac{1}{2}\right)^2}{\frac{1}{2}} = 1.
Analogously to the circle case, the equation can be written more clearly using vectors: \frac{\left({\color{red}\vec x} - \vec x_1\right)*\left({\color{red}\vec x} - \vec x_2\right)} {\det\left({\color{red}\vec x} - \vec x_1,{\color{red}\vec x} - \vec x_2\right)} Any ellipse can be described in a suitable coordinate system by an equation \tfrac{x^2}{a^2} + \tfrac{y^2}{b^2} = 1 . The equation of the tangent at a point P_1 = \left(x_1,\, y_1\right) of the ellipse is \tfrac{x_1x}{a^2} + \tfrac{y_1y}{b^2} = 1.
If one allows point P_1 = \left(x_1,\, y_1\right) to be an arbitrary point different from the origin, then point P_1 = \left(x_1,\, y_1\right) \neq (0,\, 0) is mapped onto the line \tfrac{x_1 x}{a^2} + \tfrac{y_1 y}{b^2} = 1 , not through the center of the ellipse. This relation between points and lines is a bijection. The inverse function maps line y = mx + d,\ d \ne 0 onto the point \left(-\tfrac{ma^2}{d},\, \tfrac{b^2}{d}\right) and line x = c,\ c \ne 0 onto the point \left(\tfrac{a^2}{c},\, 0\right).
Such a relation between points and lines generated by a conic is called pole-polar relation or polarity. The pole is the point; the polar the line.
By calculation one can confirm the following properties of the pole-polar relation of the ellipse: For a point (pole) on the ellipse, the polar is the tangent at this point (see diagram: For a pole P outside the ellipse, the intersection points of its polar with the ellipse are the tangency points of the two tangents passing P (see diagram: For a point within the ellipse, the polar has no point with the ellipse in common (see diagram: The intersection point of two polars is the pole of the line through their poles.
The foci (c,\, 0) and (-c,\, 0) , respectively, and the directrices x = \tfrac{a^2}{c} and x = -\tfrac{a^2}{c} , respectively, belong to pairs of pole and polar. Because they are even polar pairs with respect to the circle x^2+y^2=a^2 , the directrices can be constructed by compass and straightedge (see Inversive geometry). Pole-polar relations exist for hyperbolas and parabolas as well. where a and b are the lengths of the semi-major and semi-minor axes, respectively.
The area formula \pi a b is intuitive: start with a circle of radius b (so its area is \pi b^2 ) and stretch it by a factor a/b to make an ellipse. This scales the area by the same factor: \pi b^2(a/b) = \pi a b. However, using the same approach for the circumference would be fallacious – compare the integrals \int f(x)\, dx and \int \sqrt{1+f'^2(x)}\, dx . It is also easy to rigorously prove the area formula using integration as follows. Equation ( ) can be rewritten as y(x) = b \sqrt{1 - x^2 / a^2}.
For x\in[-a,a], this curve is the top half of the ellipse. So twice the integral of y(x) over the interval [-a,a] will be the area of the ellipse: \begin{align} A_\text{ellipse} &= \int_{-a}^a 2b\sqrt{1 - \frac{x^2}{a^2}}\,dx\\ &= \frac ba \int_{-a}^a 2\sqrt{a^2 - x^2}\,dx. \end{align} The second integral is the area of a circle of radius a, that is, \pi a^2. So A_\text{ellipse} = \frac{b}{a}\pi a^2 = \pi ab. An ellipse defined implicitly by Ax^2+ Bxy + Cy^2 = 1 has area 2\pi / \sqrt{4AC - B^2}.
The area can also be expressed in terms of eccentricity and the length of the semi-major axis as a^2\pi\sqrt{1-e^2} (obtained by solving for flattening, then computing the semi-minor axis). So far we have dealt with erect ellipses, whose major and minor axes are parallel to the x and y axes. However, some applications require tilted ellipses. In charged-particle beam optics, for instance, the enclosed area of an erect or tilted ellipse is an important property of the beam, its emittance.
In this case a simple formula still applies, namely where y_{\text{int}} , x_{\text{int}} are intercepts and x_{\text{max}} , y_{\text{max}} are maximum values. It follows directly from Apollonios's theorem.
Circumference
The circumference C of an ellipse is: C \,=\, 4a\int_0^{\pi/2}\sqrt {1 - e^2 \sin^2\theta}\ d\theta \,=\, 4 a \,E(e) where again a is the length of the semi-major axis, e=\sqrt{1 - b^2/a^2} is the eccentricity, and the function E is the complete elliptic integral of the second kind, E(e) \,=\, \int_0^{\pi/2}\sqrt {1 - e^2 \sin^2\theta}\ d\theta which is in general not an elementary function.
The circumference of the ellipse may be evaluated in terms of E(e) using Gauss's arithmetic-geometric mean; this is a quadratically converging iterative method (see here for details).
The exact infinite series is: \begin{align} \frac C{2\pi a} &= 1 - \left(\frac{1}{2}\right)^2e^2 - \left(\frac{1\cdot 3}{2\cdot 4}\right)^2\frac{e^4}{3} - \left(\frac{1\cdot 3\cdot 5}{2\cdot 4\cdot 6}\right)^2\frac{e^6}{5} - \cdots \\ &= 1 - \sum_{n=1}^\infty \left(\frac{(2n-1)!!}{(2n)!!}\right)^2 \frac{e^{2n}}{2n-1} \\ &= -\sum_{n=0}^\infty \left(\frac{(2n-1)!!}{(2n)!!}\right)^2 \frac{e^{2n}}{2n-1}, \end{align} where n!! is the double factorial (extended to negative odd integers in the usual way, giving (-1)!! = 1 and (-3)!! = -1 ).
This series converges, but by expanding in terms of h = (a-b)^2 / (a+b)^2, James Ivory, Bessel and Kummer derived a series that converges much more rapidly.
It is most concisely written in terms of the binomial coefficient with n = 1/2 : \begin{align} \frac{C}{\pi(a+b)} &= \sum_{n=0}^\infty {\frac 12 \choose n}^2 h^n \\ &= \sum_{n=0}^\infty \left(\frac{(2n-3)!!}{(2n)!!}\right)^2 h^n \\ &= \sum_{n=0}^\infty \left(\frac{(2n-3)!!}{2^n n!}\right)^2 h^n \\ &= \sum_{n=0}^\infty \left(\frac{1}{(2n-1)4^n}\binom{2n}{n}\right)^2 h^n \\ &= 1 + \frac{h}{4} + \frac{h^2}{64} + \frac{h^3}{256} + \frac{25\,h^4}{16384} + \frac{49\,h^5}{65536} + \frac{441\,h^6}{2^{20}} + \frac{1089\,h^7}{2^{22}} + \cdots. \end{align} The coefficients are slightly smaller (by a factor of 2n-1 ), but also e^4/16 \le h \le e^4 is numerically much smaller than e except at h = e = 0 and h = e = 1 .
For eccentricities less than 0.5 the error is at the limits of double-precision floating-point after the h^4 term. Srinivasa Ramanujan gave two close approximations for the circumference in §16 of "Modular Equations and Approximations to \pi "; they are \frac C\pi \approx 3(a + b) - \sqrt{(3a + b)(a + 3b)} = 3(a + b) - \sqrt{3(a+b)^2 + 10ab} and \frac C{\pi(a+b)} \approx 1+\frac{3h}{10+\sqrt{4-3h}}, where h takes on the same meaning as above. The errors in these approximations, which were obtained empirically, are of order h^3 and h^5, respectively.
This is because the second formula's infinite series expansion matches Ivory's formula up to the h^4 term.
Arc length
More generally, the arc length of a portion of the circumference, as a function of the angle subtended (or of any two points on the upper half of the ellipse), is given by an incomplete elliptic integral. The upper half of an ellipse is parameterized by y = b\ \sqrt{ 1-\frac{x^{2}}{a^{2}}\ } ~. Then the arc length s from \ x_{1}\ to \ x_{2}\ is: s = -b\int_{\arccos \frac{x_1}{a}}^{\arccos \frac{x_2}{a}} \sqrt{\ 1 + \left( \tfrac{a^2}{b^2} - 1 \right)\ \sin^2 z ~} \; dz ~.
This is equivalent to s = b\ \left[ \; E\left(z \;\Biggl|\; 1 - \frac{a^2}{b^2} \right) \; \right]^{\arccos \frac{x_1}{a}}_{z\ =\ \arccos \frac{x_2}{a}} where E(z \mid m) is the incomplete elliptic integral of the second kind with parameter m=k^{2}.
Some lower and upper bounds on the circumference of the canonical ellipse \ x^2/a^2 + y^2/b^2 = 1\ with \ a \geq b\ are \begin{align} 2\pi b &\le C \le 2\pi a\ , \\ \pi (a+b) &\le C \le 4(a+b)\ , \\ 4\sqrt{a^2+b^2\ } &\le C \le \sqrt{2\ } \pi \sqrt{a^2 + b^2\ } ~. \end{align} Here the upper bound \ 2\pi a\ is the circumference of a circumscribed concentric circle passing through the endpoints of the ellipse's major axis, and the lower bound 4\sqrt{a^2+b^2} is the perimeter of an inscribed rhombus with vertices at the endpoints of the major and the minor axes.
Given an ellipse whose axes are drawn, we can construct the endpoints of a particular elliptic arc whose length is one eighth of the ellipse's circumference using only straightedge and compass in a finite number of steps; for some specific shapes of ellipses, such as when the axes have a length ratio of , it is additionally possible to construct the endpoints of a particular arc whose length is one twelfth of the circumference.
(The vertices and co-vertices are already endpoints of arcs whose length is one half or one quarter of the ellipse's circumference.) However, the general theory of straightedge-and-compass elliptic division appears to be unknown, unlike in the case of the circle and the lemniscate.
The division in special cases has been investigated by Legendre in his classical treatise. \kappa = \frac{1}{a^2 b^2}\left(\frac{x^2}{a^4}+\frac{y^2}{b^4}\right)^{-\frac{3}{2}}\ , and the radius of curvature, ρ = 1/κ, at point (x,y) : \rho = a^2 b^2 \left(\frac{x^{2}}{a^4} + \frac{y^{2}}{b^4}\right)^\frac{3}{2} = \frac{1}{a^4 b^4} \sqrt{\left(a^4 y^{2} + b^4 x^{2}\right)^3} \ .
The radius of curvature of an ellipse, as a function of angle from the center, is: R(\theta)=\frac{a^2}{b}\biggl(\frac{1-e^2(2-e^2)(\cos\theta)^2}{1-e^2(\cos\theta)^2}\biggr)^{3/2}\,, where e is the eccentricity. Radius of curvature at the two vertices (\pm a,0) and the centers of curvature: \rho_0 = \frac{b^2}{a}=p\ , \qquad \left(\pm\frac{c^2}{a}\,\bigg|\,0\right)\ . Radius of curvature at the two co-vertices (0,\pm b) and the centers of curvature: \rho_1 = \frac{a^2}{b}\ , \qquad \left(0\,\bigg|\,\pm\frac{c^2}{b}\right)\ .
The locus of all the centers of curvature is called an evolute. In the case of an ellipse, the evolute is an astroid.
Physics
\begin{align} e &= \frac{r_a - r_p}{r_a + r_p} = \frac{r_a - r_p}{2a} \\ r_a &= (1 + e)a \\ r_p &= (1 - e)a \end{align} where r_a is the radius at apoapsis, i.e., the farthest distance of the orbit to the barycenter of the system, which is a focus of the ellipse r_p is the radius at periapsis, the closest distance a is the length of the semi-major axis Also, in terms of r_a and r_p , the semi-major axis a is their arithmetic mean, the semi-minor axis b is their geometric mean, and the semi-latus rectum \ell is their harmonic mean. In other words, \begin{align} a &= \frac{r_a + r_p}{2} \\[2pt] b &= \sqrt{r_a r_p} \\[2pt] \ell &= \frac{2}{\frac{1}{r_a} + \frac{1}{r_p}} = \frac{2r_ar_p}{r_a + r_p}. \end{align}
Statistics and finance
In statistics, a bivariate random vector (X, Y) is jointly elliptically distributed if its iso-density contours—loci of equal values of the density function—are ellipses. The concept extends to an arbitrary number of elements of the random vector, in which case in general the iso-density contours are ellipsoids. A special case is the multivariate normal distribution. The elliptical distributions are important in the financial field because if rates of return on assets are jointly elliptically distributed then all portfolios can be characterized completely by their mean and variance—that is, any two portfolios with identical mean and variance of portfolio return have identical distributions of portfolio return.
Notes
Apollonius' Derivation of the Ellipse at Convergence The Shape and History of The Ellipse in Washington, D.C. by Clark Kimberling Ellipse circumference calculator Collection of animated ellipse demonstrations Trammel according Frans van Schooten by Matt Parker
Text derived from https://en.wikipedia.org/w/index.php?oldid=1374912483 under CC BY-SA 4.0; modifications have been made.