Lesson plan

Embedded instrumentation

In the electronics industry, embedded instrumentation refers to the integration of test and measurement instrumentation into semiconductor chips (or integrated circuit devices). Embedded instrumentation differs from embedded system, which are electronic systems or subsystems that usually comprise the control portion of a larger electronic system. Instrumentation embedded into chips (embedded instrumentation) is employed in a variety of electronic test applications, including validating and testing chips themselves, validating, testing and debugging the circuit boards where these chips are deployed, and troubleshooting systems once they have been installed in the field. A working group of the IEEE (Institute of Electrical and Electronics Engineers) that is developing a standard for accessing embedded instruments (the IEEE 1687 Internal JTAG standard ) defines embedded instrumentation as follows: Any logic structure within a device whose purpose is Design for Test (DFT), Design-for-Debug (DFD), Design-for-Yield (DFY), Test... There exists the widespread use of embedded instrumentation (such as BIST (built-in self-test) Engines, Complex I/O Characterization and Calibration, Embedded Timing Instrumentation, etc.).

Back to article

Article summary

In the electronics industry, embedded instrumentation refers to the integration of test and measurement instrumentation into semiconductor chips (or integrated circuit devices). Embedded instrumentation differs from embedded system, which are electronic systems or subsystems that usually comprise the control portion of a larger electronic system. Instrumentation embedded into chips (embedded instrumentation) is employed in a variety of electronic test applications, including validating and testing chips themselves, validating, testing and debugging the circuit boards where these chips are deployed, and troubleshooting systems once they have been installed in the field. A working group of the IEEE (Institute of Electrical and Electronics Engineers) that is developing a standard for accessing embedded instruments (the IEEE 1687 Internal JTAG standard ) defines embedded instrumentation as follows: Any logic structure within a device whose purpose is Design for Test (DFT), Design-for-Debug (DFD), Design-for-Yield (DFY), Test... There exists the widespread use of embedded instrumentation (such as BIST (built-in self-test) Engines, Complex I/O Characterization and Calibration, Embedded Timing Instrumentation, etc.).

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.