Lesson plan

EMC E2

The EMC E2 was an American passenger-train diesel locomotive which as a single unit developed , from two (2) prime movers. These locomotives were typically operated as a unit set (A - B - B) or (A - B - A); where the three unit lashup developed 5400 horsepower. This was almost the ideal horsepower required ( ) for the tonnage of a 15 - 18 car passenger train, operated over the ruling grades of virtually all of the mileage between major American cities. The units were of the A1A-A1A wheel arrangement, and manufactured by Electro-Motive Corporation (EMC), later Electro-Motive Diesel (EMD) of La Grange, Illinois. Two sets (each of three units, A-B-B) ( ) were produced in 1937 for named passenger trains; the first set (SF-1, SF-2, and SF-3) for the City of San Francisco. These motive-power sets were jointly owned and operated by the Union Pacific Railroad, the Chicago and North Western Railway, and the Southern Pacific Railroad. The second A-B-B set (LA-1, LA-2, and LA-3) was used for the City of Los Angeles; and, was jointly owned and operated by the UP and CNW only. The first locomotive power unit was the control cab, or "A" unit, while the other two were cabless boosters, or "B" units. The control cab and booster units were designed for multiple unit operation (the first in diesel motive power).…

Back to article

Article summary

The EMC E2 was an American passenger-train diesel locomotive which as a single unit developed , from two (2) prime movers. These locomotives were typically operated as a unit set (A - B - B) or (A - B - A); where the three unit lashup developed 5400 horsepower. This was almost the ideal horsepower required ( ) for the tonnage of a 15 - 18 car passenger train, operated over the ruling grades of virtually all of the mileage between major American cities. The units were of the A1A-A1A wheel arrangement, and manufactured by Electro-Motive Corporation (EMC), later Electro-Motive Diesel (EMD) of La Grange, Illinois. Two sets (each of three units, A-B-B) ( ) were produced in 1937 for named passenger trains; the first set (SF-1, SF-2, and SF-3) for the City of San Francisco. These motive-power sets were jointly owned and operated by the Union Pacific Railroad, the Chicago and North Western Railway, and the Southern Pacific Railroad. The second A-B-B set (LA-1, LA-2, and LA-3) was used for the City of Los Angeles; and, was jointly owned and operated by the UP and CNW only. The first locomotive power unit was the control cab, or "A" unit, while the other two were cabless boosters, or "B" units. The control cab and booster units were designed for multiple unit operation (the first in diesel motive power).…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.