Lesson plan

EMC E3

The EMC E3 is a , A1A-A1A diesel-electric passenger locomotive that was manufactured by Electro-Motive Corporation of La Grange, Illinois as part of the E Series of EMC/EMD diesel passenger locomotives. The EMC demonstrator #822 was released from La Grange for test on September 12, 1938. The cab version, or E3A, was manufactured from September 1938 to June 1940, and 17 were produced. The booster version, or E3B, was manufactured in March 1939 and September 1939, and 2 were produced. The was achieved by putting two , 12-cylinder, model 567 engines in the engine compartment. Each engine drove its own electrical generator to power the traction motors. The E3 was the fourth model in a long line of passenger diesels of similar design known as EMD E-units. Compared with passenger locomotives made later by EMD, the noses of the E3, E4, E5, and E6 cab units had pronounced slants when viewed from the side. Therefore, these four models have been nicknamed "slant nose" units. Later E models had the more vertical "bulldog nose" of the F series. E3 demonstrator 822 was built with a nose identical to earlier EA and E1A units, but later locomotives in the series featured an elevated headlamp mounted in a nacelle, distinct from the flush profile mounting of the earlier units. 822 was modified in a similar fashion prior to delivery to the Kansas City Southern Railway.

Back to article

Article summary

The EMC E3 is a , A1A-A1A diesel-electric passenger locomotive that was manufactured by Electro-Motive Corporation of La Grange, Illinois as part of the E Series of EMC/EMD diesel passenger locomotives. The EMC demonstrator #822 was released from La Grange for test on September 12, 1938. The cab version, or E3A, was manufactured from September 1938 to June 1940, and 17 were produced. The booster version, or E3B, was manufactured in March 1939 and September 1939, and 2 were produced. The was achieved by putting two , 12-cylinder, model 567 engines in the engine compartment. Each engine drove its own electrical generator to power the traction motors. The E3 was the fourth model in a long line of passenger diesels of similar design known as EMD E-units. Compared with passenger locomotives made later by EMD, the noses of the E3, E4, E5, and E6 cab units had pronounced slants when viewed from the side. Therefore, these four models have been nicknamed "slant nose" units. Later E models had the more vertical "bulldog nose" of the F series. E3 demonstrator 822 was built with a nose identical to earlier EA and E1A units, but later locomotives in the series featured an elevated headlamp mounted in a nacelle, distinct from the flush profile mounting of the earlier units. 822 was modified in a similar fashion prior to delivery to the Kansas City Southern Railway.

Key claims

  1. release date: 1938-09-12 — source: Wikipedia, revision 1378729044, retrieved 2026-10-20 · confidence 0.95

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. The record states that the release date is "1938-09-12". What evidence would count against this claim?
  3. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  4. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.