Lesson plan

EMD E6

The EMC E6 is a , A1A-A1A, streamlined passenger train locomotive manufactured by Electro-Motive Corporation, and its corporate successor, General Motors Electro-Motive Division, of La Grange, Illinois. The cab version, E6A, was manufactured from November 1939 to September 1942; 91 were produced. The booster version, E6B, was manufactured from April 1940 to February 1942; 26 were produced. The was achieved by putting two , 12-cylinder, model 567 engines in the engine compartment. Each engine drove its own electrical generator to power the traction motors. The E6 was the seventh model in a long line of passenger diesels of similar design known as EMD E-units. Compared with passenger locomotives made later by EMD, the noses of the E3, E4, E5, and E6 cab units had pronounced slants when viewed from the side. Therefore, these four models have been nicknamed "slant nose" units. Later E models had the "bulldog nose" of the F series. One interesting E6 variant custom-produced for the Missouri Pacific was the model EMC AA. This was a motorcar-style unit which had only one prime mover and , and substituted a baggage compartment where the other diesel V-12 would have been. The Chicago, Rock Island and Pacific owned an equally interesting pair of similar power cars known as the EMC AB6, which were mechanically identical but had boxcabs in blunt noses.…

Back to article

Article summary

The EMC E6 is a , A1A-A1A, streamlined passenger train locomotive manufactured by Electro-Motive Corporation, and its corporate successor, General Motors Electro-Motive Division, of La Grange, Illinois. The cab version, E6A, was manufactured from November 1939 to September 1942; 91 were produced. The booster version, E6B, was manufactured from April 1940 to February 1942; 26 were produced. The was achieved by putting two , 12-cylinder, model 567 engines in the engine compartment. Each engine drove its own electrical generator to power the traction motors. The E6 was the seventh model in a long line of passenger diesels of similar design known as EMD E-units. Compared with passenger locomotives made later by EMD, the noses of the E3, E4, E5, and E6 cab units had pronounced slants when viewed from the side. Therefore, these four models have been nicknamed "slant nose" units. Later E models had the "bulldog nose" of the F series. One interesting E6 variant custom-produced for the Missouri Pacific was the model EMC AA. This was a motorcar-style unit which had only one prime mover and , and substituted a baggage compartment where the other diesel V-12 would have been. The Chicago, Rock Island and Pacific owned an equally interesting pair of similar power cars known as the EMC AB6, which were mechanically identical but had boxcabs in blunt noses.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.