Lesson plan

Emmons problem

In combustion, Emmons problem describes the flame structure which develops inside the boundary layer, created by a flowing oxidizer stream on flat fuel (solid or liquid) surfaces. The problem was first studied by Howard Wilson Emmons in 1956. The flame is of diffusion flame type because it separates fuel and oxygen by a flame sheet. The corresponding problem in a quiescent oxidizer environment is known as Clarke–Riley diffusion flame.

Back to article

Article summary

In combustion, Emmons problem describes the flame structure which develops inside the boundary layer, created by a flowing oxidizer stream on flat fuel (solid or liquid) surfaces. The problem was first studied by Howard Wilson Emmons in 1956. The flame is of diffusion flame type because it separates fuel and oxygen by a flame sheet. The corresponding problem in a quiescent oxidizer environment is known as Clarke–Riley diffusion flame.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.