EN 10080

The EN 10080: Steel for the reinforcement of concrete is a European Standard.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The EN 10080: Steel for the reinforcement of concrete is a European Standard. This standard is referenced by EN 1992.

This standard specifies general requirements and definitions for performance characteristics of steel reinforcement suitable for welding, which is used for reinforcement of concrete structures, supplied as finished products: * rods, coils (wire rod, wire) and unwound products; * reinforcement meshes automatically welded in factory conditions; * spatial scaffolds. Steel conforming to this standard has a corrugated, periodically profiled or smooth surface.

This standard does not apply to * Steel reinforcement not suitable for welding; * Zinc-plated steel bars; * Epoxy-coated steel bars; * Corrosion-resistant steel bars; * Prestressed steel bars; * Periodically profiled bars; * Further processing such as cutting or cutting and bending. This standard does not define technical grades.

The technical grades shall be determined in accordance with this standard according to the specified values for Re, Agt, Rm/Re, and (if applicable), fatigue strength (if applicable), flexibility, weldability, bending strength, welded or clamped joint strength (for welded reinforcement mesh or spatial frameworks) and dimensional tolerances.

The EN 10080: Steel for the reinforcement of concrete is a European Standard. This standard is referenced by EN 1992.

This standard specifies general requirements and definitions for performance characteristics of steel reinforcement suitable for welding, which is used for reinforcement of concrete structures, supplied as finished products: rods, coils (wire rod, wire) and unwound products; reinforcement meshes automatically welded in factory conditions; spatial scaffolds. Steel conforming to this standard has a corrugated, periodically profiled or smooth surface.

This standard does not apply to Steel reinforcement not suitable for welding; Zinc-plated steel bars; Epoxy-coated steel bars; Corrosion-resistant steel bars; Prestressed steel bars; Periodically profiled bars; Further processing such as cutting or cutting and bending. This standard does not define technical grades.

The technical grades shall be determined in accordance with this standard according to the specified values for Re, Agt, Rm/Re, and (if applicable), fatigue strength (if applicable), flexibility, weldability, bending strength, welded or clamped joint strength (for welded reinforcement mesh or spatial frameworks) and dimensional tolerances.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1302254193 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.