End correction

Article summary

In acoustics, end correction is a short distance added to the length of a resonance pipe, in order to calculate the precise resonant frequency of the pipe. Whenever a wave forms through a medium/object (such as an organ pipe) with a closed/open end, the wave may form incorrectly, i.e., it may not actually start from the opening of the object but instead before the opening, producing an error when studying it theoretically. Hence an end correction is sometimes required to appropriately study its properties. The end correction depends on the radius of the object. An acoustic pipe, such as an organ pipe, marimba, or flute resonates at a specific pitch or frequency. Longer pipes resonate at lower frequencies, producing lower-pitched sounds. In an ideal tube, the wavelength is directly proportional to the length of the tube. A tube that is open at one end and closed at the other produces sound with a wavelength equal to four times the length of the tube. A tube that is open at both ends produces sound whose wavelength is twice the length of the tube. Thus, when a Boomwhacker with two open ends is capped at one end, the pitch goes down by one octave. The analysis above applies only to a tube of zero diameter. When designing an organ or Boomwhacker, the diameter of the tube must be taken into account. The pitch of a real tube is lower than the pitch predicted by the theory.…

Key claims

No claims recorded.

Discussion questions

1. Summarise the article in your own words. Which single claim would you verify first, and why?
2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.