EnergyBus

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

EnergyBus connectors are used for charging electric bicycles and pedelecs within Europe. The connector is circular in shape and specified for charging light electric vehicles at up to 1.5 kilowatts. Electric power is provided at 12–48 volts direct current (DC) so that any battery charger can charge any rechargeable battery. Data transmission between the battery and charger uses a CAN bus, exchanging CANopen messages defined by the CAN in Automation CiA-454 standard.

EnergyBus connectors are used for charging electric bicycles and pedelecs within Europe. The connector is circular in shape and specified for charging light electric vehicles at up to 1.5 kilowatts. Electric power is provided at 12–48 volts direct current (DC) so that any battery charger can charge any rechargeable battery. Data transmission between the battery and charger uses a CAN bus, exchanging CANopen messages defined by the CAN in Automation CiA-454 standard.

Components

, a range of electric bike components were available, including electric motors by Acron, 300 watt power conversion adaptors by Panasonic Industries and with Electragil Software, bike lights by Phillips, and several designs batteries by HighTech Energy, plus human interfaces by Marquardt. A specific inverter was available from Kaco for islanding. Electragil, a Swiss company located close to Winterthur, markets an integrated E-Bike component system.

Pironex, a German company located at the baltic sea, provides a large scale of EnergyBus products like intelligent charger, battery-adaptors and input/output-devices. Mobipus, a Taiwan company, located at New Taipei City, provides complete line of PMSM motor controller (from 48v to 300v) for electric motorcycle and scooter and battery management system. EnergyBus component developers can make use of a set of prepackaged software libraries and a framework of development tools.

Electric bicycles

By 2012 the first electric bicycle based on EnergyBus, was introduced by TourDeSuisse (TDS) in Switzerland. This bicycle, call The Impulse was built on the Electragil system. The G1 is a E-Bike for heavy goods transport introduced in 2012. The Copenhagen Wheel, an integrated motor, sensor and battery for bike assistance, is equipped with an EnergyBus connector.

Public infrastructure

Public charge stations for pedelecs have been deployed in the Tegernsee region.

Island power systems

In stand-alone power system systems operating in "island" mode without a connection to an electrical grid, EnergyBus can be used to interconnect small electrical devices. Examples are repeater stations in mobile communication networks, measurement stations, off-grid housing, village-sized direct current grids, and off-grid water pumping stations. The Fraunhofer Institute for Solar Energy Systems was using EnergyBus in electrical island systems in Egypt with photovoltaic panels and batteries, including the Kaco converters.

History

Discussion of what became EnergyBus started around the year 2000, centered on the topic of serial hybrid light electric vehicles. Those ideas went through many iterations and included the filing of patents. In late-2011 EnergyBus version 1.0 was released covering battery chargers and battery packs. This version included defining the physical plug and socket, as well as the interworking of the power adapter with the battery.

Future development

The version 2.0 of the standard with general definitions and a full scope of component descriptions was scheduled to be released in 20141 with an international standard following later. Additional activity is underway to develop a Charge Lock Cable.

History

Memberships

Members of the EnergyBus association receive information about the standard and support it. Members are in one of three levels: Associate Membership: Associate members support the standardization process through actively developing the various standard definitions. Associate members have access to the respective documents in draft versions.

Adopter Membership: This membership is for implementing partners that wish to work only with the finished documents Community Membership: Beginning with partners from educational institutions, community members receive access to documentation, and in return provide open source or open hardware licensed results published on publicly accessible versioning systems like gitHub or Google Code. Members are individuals, as well as manufacturers of components, vehicles, systems, and retailers.

Members are from all over the world, and include Bosch, Panasonic, Sanyo, Deutsche Bahn, Philips, and VARTA.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1333408889 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “EnergyBus” revision 1333408889 · retrieved 2026-10-20 release date (×1) · confidence 0.95 revision URL