Engineered wood
≈ 13 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
in Hanover, Germany Engineered wood, also called mass timber, composite wood, man-made wood, or manufactured board, includes a range of derivative wood products which are manufactured by binding or fixing the strands, particles, fibres, veneers, or boards of wood, together with adhesives, or other methods of fixation to form composite material. The panels vary in size but can range upwards of and in the case of cross-laminated timber (CLT) can be of any thickness from a few inches to or more.
These products are engineered to precise design specifications, which are tested to meet national or international standards and provide uniformity and predictability in their structural performance. Engineered wood products are used in a variety of applications, from home construction to commercial buildings to industrial products. The products can be used for joists and beams that replace steel in many building projects. The term mass timber describes a group of building materials that can replace concrete assemblies.
Such wood-based products typically undergo machine grading in order to be evaluated and categorized for mechanical strength and suitability for specific applications. Typically, engineered wood products are made from the same hardwoods and softwoods used to manufacture lumber.…
in Hanover, Germany Engineered wood, also called mass timber, composite wood, man-made wood, or manufactured board, includes a range of derivative wood products which are manufactured by binding or fixing the strands, particles, fibres, veneers, or boards of wood, together with adhesives, or other methods of fixation to form composite material. The panels vary in size but can range upwards of and in the case of cross-laminated timber (CLT) can be of any thickness from a few inches to or more.
These products are engineered to precise design specifications, which are tested to meet national or international standards and provide uniformity and predictability in their structural performance. Engineered wood products are used in a variety of applications, from home construction to commercial buildings to industrial products. The products can be used for joists and beams that replace steel in many building projects. The term mass timber describes a group of building materials that can replace concrete assemblies.
Such wood-based products typically undergo machine grading in order to be evaluated and categorized for mechanical strength and suitability for specific applications. Typically, engineered wood products are made from the same hardwoods and softwoods used to manufacture lumber. Sawmill scraps and other wood waste can be used for engineered wood composed of wood particles or fibers, but whole logs are usually used for veneers, such as plywood, medium-density fibreboard (MDF), or particle board.
Some engineered wood products, like oriented strand board (OSB), can use trees from the poplar family, a common but non-structural species. , one kind of engineered wood Alternatively, it is also possible to manufacture similar engineered bamboo from bamboo; and similar engineered cellulosic products from other lignin-containing materials such as rye straw, wheat straw, rice straw, hemp stalks, kenaf stalks, or sugar cane residue, in which case they contain no actual wood but rather vegetable fibers.
Flat-pack furniture is typically made out of man-made wood due to its low manufacturing costs and its low weight.
Types of products
store There are a wide variety of engineered wood products for both structural and non-structural applications. This list is not comprehensive, and is intended to help categorize and distinguish between different types of engineered wood.
I-joists
I-joists are " "-shaped structural members designed for use in floor and roof construction. An I-joist consists of top and bottom flanges of various widths united with webs of various depths. The flanges resist common bending stresses, and the web provides shear performance. I-joists are designed to carry heavy loads over long distances while using less lumber than a dimensional solid wood joist of a size necessary to do the same task. As of 2004, approximately 81% of all wood light framed floors were framed using I-joists.
Environmental benefits
New construction is in high demand due to growing worldwide population. However, the main materials used in new construction are currently steel and concrete. The manufacturing of these materials creates comparatively high emissions of carbon dioxide ( ) into the atmosphere. Engineered wood has the potential to reduce carbon emissions if it replaces steel and/or concrete in the construction of buildings.
In 2014, steel and cement production accounted for about 1320 megatonnes (Mt) and 1740 Mt respectively, which made up about 9% of global emissions that year. In a study that did not take the carbon sequestration potential of engineered wood into account, it was found that roughly 50 Mt e (carbon dioxide equivalent) could be eliminated by 2050 with the full uptake of a hybrid construction system utilizing engineered wood and steel.
When considering the added effects that carbon sequestration can have over the lifetime of the material, the emissions reductions of engineered wood is even more substantial, as laminated wood that is not incinerated at the end of its lifecycle absorbs around 582 kg of /m 3 , while reinforced concrete emits 458 kg /m 3 and steel 12.087 kg /m 3 . There is not a strong consensus for measuring the carbon sequestration potential of wood. In life-cycle assessment, sequestered carbon is sometimes called biogenic carbon.
ISO 21930, a standard that governs life cycle assessment, requires the biogenic carbon from a wood product can only be included as a negative input (i.e. carbon sequestration) when the wood product originated in a sustainably managed forest. This generally means that wood needs to be FSC or SFI-certified to qualify as carbon sequestering.
Advantages
Engineered wood products are used in a variety of ways, often in applications similar to solid wood products: Mass timber (MT) is lightweight allowing the material to be easily handled, manufactured, and transported. This contributes to it being cost effective and easy to use on site. MT offers greater strength and stiffness (based on its strength to weight ratio), increased dimensional stability, and uniformity in structures than solid wood.
When compared to steel/concrete, MT built buildings use up to 15% less energy because of the reduced energy needed to create these wood products. MT buildings on average save 20-25% in time when compared to conventional steel/concrete buildings and 4.2% on capital cost. MT products sequester carbon and store it within themselves over their lifespan. Using this instead of concrete and steel in buildings will reduce the embodied emissions in buildings. Using MT has an estimated savings of around 20% in embodied carbon when compared to steel or concrete.
This is because MT is a lot lighter when compared to these two materials, so it is less intensive for the machinery to transport both to site and once delivered. MT products can provide high levels of airtightness and low coefficients of thermal conductivity meaning that the air inside cannot escape, and heat is not lost easily. MT built buildings perform very well in seismic events because they are roughly half the mass and half the stiffness when compared to reinforced concrete buildings.
Reduced stiffness allows MT buildings to be ductile and resist lateral distortion without compromising the structural integrity of the building. MT is fire resistant to an extent. Although it is considered a combustible material, MT burns slowly and in a predictable manner. When burned, a charred layer forms on the outside that protects the inner layers of the material. However, if the charred layer comes off, the inner layers will be exposed which can compromise the integrity of the material.
Advantages by product type: CLT: Offers high dimensional stability, high strength and stiffness and is easy to manufacture. Glulam: Offers high strength and stiffness, is structurally efficient, and can be manufactured into complex shapes. NLT: Does not require any specialized equipment to manufacture, is cost effective, and easy to handle. DLT: Offers high dimensional stability, is easy and safe to manufacture, and no metal fasteners or adhesive is required.
SCL: Is able to withstand greater loads compared to solid timber and is not prone to shrinking, splitting or warping. Engineered wood products may be preferred over solid wood in some applications due to certain comparative advantages: Because engineered wood is man-made, it can be designed to meet application-specific performance requirements.
Required shapes and dimension do not drive source tree requirements (length or width of the tree) Engineered wood products are versatile and available in a wide variety of thicknesses, sizes, grades, and exposure durability classifications, making the products ideal for use in unlimited construction, industrial, and home project application. Engineered wood products are designed and manufactured to maximize the natural strength and stiffness characteristics of wood.
The products are very stable and some offer greater structural strength than typical wood building materials. Glued laminated timber (glulam) has greater strength and stiffness than comparable dimensional lumber and, pound for pound, is stronger than steel. Engineered wood panels are easy to work with using ordinary tools and basic skills. They can be cut, drilled, routed, jointed, glued, and fastened. Plywood can be bent to form curved surfaces without loss of strength.
Large panel sizes speeds up construction by reducing the number of pieces that need to be handled and installed. Engineered wood products are a more efficient use of wood as they can be made from wood that has defects, underutilized species or smaller pieces of wood which also enables the use of smaller trees Wooden trusses are competitive in many roof and floor applications, and their high strength-to-weight ratios permit long spans offering flexibility in floor layouts.
Sustainable design advocates recommend using engineered wood, which can be produced from relatively small trees, rather than large pieces of solid dimensional lumber, which requires cutting a large tree.
Disadvantages
Like solid wood, when exposed to high moisture conditions or termites, biodeteriorations and/or fungi decay will occur which reduces the structural integrity and durability of the wood product; essentially the wood will start to rot. Potential widespread deforestation without a sustainable forestry management plan. MT buildings are susceptible to wind driven oscillation because of the relative flexibility of the MT material which may cause discomfort to people in the building. Disadvantages by product type: CLT and Glulam: More costly than solid wood.
NLT: Labor-intensive to make with potential for human error. DLT: Limited panel sizing and thickness. SCL: Limited panel sizing and thickness; more suitable for low rise buildings. When compared to solid wood the following disadvantages are prevalent: They require more primary energy for their manufacture than solid lumber. The adhesives used in some products may cause harmful emissions. A concern with some resins is the release of formaldehyde in the finished product, often seen with urea-formaldehyde bonded products.
Properties
Plywood and OSB typically have a density of . For example, plywood sheathing or OSB sheathing typically has a surface density of . Many other engineered woods have densities much higher than OSB.
Adhesives
The types of adhesives used in engineered wood include: Urea-formaldehyde resins (UF): most common, cheapest, and not waterproof. Phenol formaldehyde resins (PF): yellow/brown, and commonly used for exterior exposure products. Melamine-formaldehyde resins (MF): white, heat, and water-resistant, and often used in exposed surfaces in more costly designs. Polymeric methylene diphenyl diisocyanate ( ) or polyurethane (PU) resins: expensive, generally waterproof, and does not contain formaldehyde, notoriously more difficult to release from platens and engineered wood presses. A more inclusive term is structural composites. For example, fiber cement siding is made of cement and wood fiber, while cement board is a low-density cement panel, often with added resin, faced with fiberglass mesh.
Mechanical fasteners
Some engineered wood products, such as DLT, NLT, and some brands of CLT, can be assembled without the use of adhesives using mechanical fasteners or joinery. These can range from profiled interlocking jointed boards, proprietary metal fixings, nails or timber dowels.
Plyscrapers
From 1942 to 1943 17 airship hangars in the United States were built of wood, as of war-time shortage no steel was available for their construction. Plyscrapers are skyscrapers that are either partially made of wood or entirely made of wood. Around the world, many different plyscrapers have been built, including the Ascent MKE building, Mjostarnet in Norway, and the Stadthaus building.
The Ascent MKE building was built in 2022 in Milwaukee, Wisconsin, and is the tallest high-rise building using different mass timber components in combination with some steel and concrete. This plyscraper is 87 meters tall and has 25 stories. The Stadthaus building is a residential building built in 2009 in Hackney, London. It has 9 stories reaching 30 meters tall. It uses CLT panels as load-bearing walls and floor 'slabs'. The Black & White Building is an office building topped out in 2023 in Shoreditch, London.
It has 6 stories reaching 17.8 meters tall. It uses CLT panels, glulam curtain walling, and LVL columns and beams. As of 2022, over 84 mass timber buildings at least eight stories tall were in construction or completed worldwide, with numerous other projects in the planning stages. Its environmental benefits and distinctive appearance drive the growing interest in mass timber construction.
Bridges
The Mistissini Bridge built in Quebec, Canada, in 2014 is a 160-meter-long bridge that features both glulam beams and CLT panels. The bridge was designed to cross over the Uupaachikus Pass. The Placer River Pedestrian Bridge built in Alaska, United States, in 2013. It spans long and is located in the Chugach National Forest. This bridge features glulam as it was used create the trusses.
Parking structures
The Glenwood CLT Parking Garage in Springfield, Oregon, is going to be a garage that features CLT. It will be 4 stories tall and hold 360 parking spaces. The parking garage however is under construction , and the year of completion is not yet known.
See also
Green building and wood Natural Fibre Board Reclaimed lumber Timber recycling
External links
APA The Engineered Wood Association Canadian Wood Council Engineered Wood Products
Text derived from https://en.wikipedia.org/w/index.php?oldid=1375880920 under CC BY-SA 4.0; modifications have been made.