Engineering fit
≈ 4 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Engineering fits are generally used as part of geometric dimensioning and tolerancing when a part or assembly is designed. In engineering terms, the "fit" is the clearance between two mating parts, and the size of this clearance determines whether the parts can, at one end of the spectrum, move or rotate independently from each other or, at the other end, are temporarily or permanently joined. Engineering fits are generally described as a "shaft and hole" pairing, but are not necessarily limited to just round components.
ISO is the internationally accepted standard for defining engineering fits, but ANSI is often still used in North America. ISO and ANSI both group fits into three categories: clearance, location or transition, and interference. Within each category are several codes to define the size limits of the hole or shaft – the combination of which determines the type of fit. A fit is usually selected at the design stage according to whether the mating parts need to be accurately located, free to slide or rotate, separated easily, or resist separation.
Cost is also a major factor in selecting a fit, as more accurate fits will be more expensive to produce, and tighter fits will be more expensive to assemble.…
Engineering fits are generally used as part of geometric dimensioning and tolerancing when a part or assembly is designed. In engineering terms, the "fit" is the clearance between two mating parts, and the size of this clearance determines whether the parts can, at one end of the spectrum, move or rotate independently from each other or, at the other end, are temporarily or permanently joined. Engineering fits are generally described as a "shaft and hole" pairing, but are not necessarily limited to just round components.
ISO is the internationally accepted standard for defining engineering fits, but ANSI is often still used in North America. ISO and ANSI both group fits into three categories: clearance, location or transition, and interference. Within each category are several codes to define the size limits of the hole or shaft – the combination of which determines the type of fit. A fit is usually selected at the design stage according to whether the mating parts need to be accurately located, free to slide or rotate, separated easily, or resist separation.
Cost is also a major factor in selecting a fit, as more accurate fits will be more expensive to produce, and tighter fits will be more expensive to assemble. Methods of producing work to the required tolerances to achieve a desired fit range from casting, forging and drilling for the widest tolerances through broaching, reaming, milling and turning to lapping and honing at the tightest tolerances.
ISO system of limits and fits
H8 (hole) tolerance range = +0.000 mm to +0.039 mm f7 (shaft) tolerance range = −0.050 mm to −0.025 mm Potential clearance will be between +0.025 mm and +0.089 mm H7 (hole) tolerance range = +0.000 mm to +0.025 mm k6 (shaft) tolerance range = +0.002 mm to +0.018 mm Potential clearance / interference will be between +0.023 mm and −0.018 mm H7 (hole) tolerance range = +0.000 mm to +0.025 mm p6 (shaft) tolerance range = +0.042 mm to +0.026 mm Potential interference will be between −0.001 mm and −0.042 mm.
Location clearance fit
LC 1 to LC 11
See also
Coiled spring pins Engineering tolerance Geometric dimensioning and tolerancing Interchangeable parts Statistical interference
References
Text derived from https://en.wikipedia.org/w/index.php?oldid=1338122685 under CC BY-SA 4.0; modifications have been made.