Lesson plan

Epibenthic sled

An epibenthic sled (or epibenthos sled/sledge) is an instrument designed to collect benthic and benthopelagic faunas from the deep sea. The sled is made from a steel frame consisting of two skids and stabilizing planes to keep it from sinking too deep into the mud. Attached to the frame is a 1 mm mesh net to collect the samples. The sled is towed along the seafloor at the sediment water interface. The device has a mechanically operated door that is closed when the sled is mid water and opens when it reaches the seafloor. When the fauna is collected, the door closes again to preserve the sample on the long trek back through the water column. The door prevents washing of the sample and loss of organisms through turbulence generated as the net is lifted out. The epibenthic sled can also be used with external sensors and cameras. The sled is mostly used to collect epifauna, however some infauna can be gathered as well. There is an adjustable cutting bar mounted underneath the sled that can cut into the sediment but it cannot sample organisms living at depths greater than 1 to 2 cm. However, this allows the sled to get a pretty good cross section of what animals burrow because most live near the sediment water interface. Swimming (close to the sediment), crawling, burrowing, and sessile animals all are collected by the sled.…

Back to article

Article summary

An epibenthic sled (or epibenthos sled/sledge) is an instrument designed to collect benthic and benthopelagic faunas from the deep sea. The sled is made from a steel frame consisting of two skids and stabilizing planes to keep it from sinking too deep into the mud. Attached to the frame is a 1 mm mesh net to collect the samples. The sled is towed along the seafloor at the sediment water interface. The device has a mechanically operated door that is closed when the sled is mid water and opens when it reaches the seafloor. When the fauna is collected, the door closes again to preserve the sample on the long trek back through the water column. The door prevents washing of the sample and loss of organisms through turbulence generated as the net is lifted out. The epibenthic sled can also be used with external sensors and cameras. The sled is mostly used to collect epifauna, however some infauna can be gathered as well. There is an adjustable cutting bar mounted underneath the sled that can cut into the sediment but it cannot sample organisms living at depths greater than 1 to 2 cm. However, this allows the sled to get a pretty good cross section of what animals burrow because most live near the sediment water interface. Swimming (close to the sediment), crawling, burrowing, and sessile animals all are collected by the sled.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.