Equatorial bulge
An equatorial bulge is a difference between the equatorial and polar diameters of a planet, due to the centrifugal force exerted by the rotation about the body's axis.
≈ 5 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
An equatorial bulge is a difference between the equatorial and polar diameters of a planet, due to the centrifugal force exerted by the rotation about the body's axis. A rotating body tends to form an oblate spheroid rather than a sphere.
On Earth
The planet Earth has a rather slight equatorial bulge; its equatorial diameter is about greater than its polar diameter, with a difference of about of the equatorial diameter. If Earth were scaled down to a globe with an equatorial diameter of , that difference would be only .
While too small to notice visually, that difference is still more than twice the largest deviations of the actual surface from the ellipsoid, including the tallest mountains and deepest oceanic trenches. Earth's rotation also affects the sea level, the imaginary surface used as a reference frame from which to measure altitudes.
This surface coincides with the mean water surface level in oceans, and is extrapolated over land by taking into account the local gravitational potential and the centrifugal force. The difference of the radii is thus about . An observer standing at sea level on either pole, therefore, is closer to Earth's center than if standing at sea level on the Equator.
As a result, the highest point on Earth, measured from the center and outwards, is the peak of Mount Chimborazo in Ecuador rather than Mount Everest. But since the ocean also bulges, like Earth and its atmosphere, Chimborazo is not as high above sea level as Everest is.
Similarly the lowest point on Earth, measured from the center and outwards, is the Litke Deep in the Arctic Ocean rather than Challenger Deep in the Pacific Ocean. But since the ocean also flattens, like Earth and its atmosphere, Litke Deep is not as low below sea level as Challenger Deep is.
More precisely, Earth's surface is usually approximated by an ideal oblate ellipsoid, for the purposes of defining precisely the latitude and longitude grid for cartography, as well as the "center of the Earth". In the WGS-84 standard Earth ellipsoid, widely used for map-making and the GPS system, Earth's radius is assumed to be to the Equator and to either pole, meaning a difference of between the radii or between the diameters, and a relative flattening of 1/298.257223563.
The ocean surface is much closer to this standard ellipsoid than the solid surface of Earth is. Because of a planet's rotation around its own axis, the gravitational acceleration is less at the equator than at the poles.
In the 17th century, following the invention of the pendulum clock, French scientists found that clocks sent to French Guiana, on the northern coast of South America, ran more slowly than their counterparts in Paris. Measurements of the acceleration due to gravity at the equator must also take into account the planet's rotation.
Any object that is stationary with respect to the surface of the Earth is following a circular trajectory, circumnavigating the Earth's axis. Pulling an object into such a circular trajectory requires a force. The acceleration that is required to circumnavigate the Earth's axis along the equator at one revolution per sidereal day is 0.0339 m/s 2 .
Providing this acceleration decreases the effective gravitational acceleration. At the equator, the effective gravitational acceleration is 9.7805 m/s 2 . This means that the true gravitational acceleration at the equator must be 9.8144 m/s 2 (9.7805 + 0.0339 = 9.8144).
At the poles, the gravitational acceleration is 9.8322 m/s 2 . The difference of 0.0178 m/s 2 between the gravitational acceleration at the poles and the true gravitational acceleration at the equator is because objects located on the equator are about further away from the center of mass of the Earth than at the poles, which corresponds to a smaller gravitational acceleration.
In summary, there are two contributions to the fact that the effective gravitational acceleration is less strong at the equator than at the poles. About 70% of the difference is contributed by the fact that objects circumnavigate the Earth's axis, and about 30% is due to the non-spherical shape of the Earth.
The diagram illustrates that on all latitudes the effective gravitational acceleration is decreased by the requirement of providing a centripetal force; the decreasing effect is strongest on the equator. f = \frac{a_e - a_p}{a} = \frac{5}{4} \frac{\omega^2 a^3}{G M} = \frac{15 \pi}{4} \frac{1}{G T^2 \rho} where G is the universal gravitational constant, a is the mean radius, a_e \approx a\, (1 + \tfrac{f}{3}) and a_p \approx a\,(1 - \tfrac{2f}{3}) are respectively the equatorial and polar radius, T is the rotation period and \omega = \tfrac{2 \pi}{T} is the angular velocity, \rho is the body density and M \simeq \tfrac{4}{3} \pi \rho a^3 is the total body mass. A related quantity is the body's second dynamic form factor, : J_2 = \frac{2 \varepsilon_\mathrm{E}}{3} - \frac{{R_\mathrm{E}}^3 {\omega_\mathrm{E}}^2}{3 G M_\mathrm{E}} with J 2 for Earth, where is the central body's oblateness, is central body's equatorial radius ( for Earth), is the central body's rotation rate ( for Earth), is the product of the universal constant of gravitation and the central body's mass ( for Earth).
Typical values
Real flattening is smaller due to mass concentration in the center of celestial bodies.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1358377840 under CC BY-SA 4.0; modifications have been made.