Lesson plan

ESATA

External SATA (eSATA) is a variant of the Serial ATA (SATA) interface designed for connecting external storage devices to a computer. Standardized in 2004 by the Serial ATA International Organization, eSATA defines connectors and cables electrically distinct from internal SATA in order to make the two physically incompatible and to meet the more demanding requirements of external use. It was widely adopted on desktop computers, laptops, and external hard-drive enclosures during the late 2000s before being largely displaced by USB 3.0 and, later, USB-C and Thunderbolt interfaces. * Minimum transmit potential increased: Range is 500–600 mV instead of 400–600 mV. * Minimum receive potential decreased: Range is 240–600 mV instead of 325–600 mV. * Identical protocol and logical signaling (link/transport-layer and above), allowing native SATA devices to be deployed in external enclosures with minimal modification * Maximum cable length of (USB and FireWire allow longer distances.) * The external cable connector equates to a shielded version of the connector specified in SATA 1.0a with these basic differences: ** The external connector has no "L" shaped key, and the guide features are vertically offset and reduced in size. This prevents the use of unshielded internal cables in external applications and vice-versa.…

Back to article

Article summary

External SATA (eSATA) is a variant of the Serial ATA (SATA) interface designed for connecting external storage devices to a computer. Standardized in 2004 by the Serial ATA International Organization, eSATA defines connectors and cables electrically distinct from internal SATA in order to make the two physically incompatible and to meet the more demanding requirements of external use. It was widely adopted on desktop computers, laptops, and external hard-drive enclosures during the late 2000s before being largely displaced by USB 3.0 and, later, USB-C and Thunderbolt interfaces. * Minimum transmit potential increased: Range is 500–600 mV instead of 400–600 mV. * Minimum receive potential decreased: Range is 240–600 mV instead of 325–600 mV. * Identical protocol and logical signaling (link/transport-layer and above), allowing native SATA devices to be deployed in external enclosures with minimal modification * Maximum cable length of (USB and FireWire allow longer distances.) * The external cable connector equates to a shielded version of the connector specified in SATA 1.0a with these basic differences: ** The external connector has no "L" shaped key, and the guide features are vertically offset and reduced in size. This prevents the use of unshielded internal cables in external applications and vice-versa.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.