Lesson plan
ESP Easy
ESP Easy is a free and open source MCU firmware for the Internet of things (IoT). and originally developed by the LetsControlIt.com community (formerly known as ESP8266.nu community). It runs on ESP8266 Wi-Fi based MCU (microcontroller unit) platforms for IoT from Espressif Systems. The name "ESP Easy," by default, refers to the firmware rather than the hardware on which it runs. At a low level, the ESP Easy firmware works the same as the NodeMCU firmware and also provides a very simple operating system on the ESP8266. The main difference between ESP Easy firmware and NodeMCU firmware is that the former is designed as a high-level toolbox that just works out-of-the-box for a pre-defined set of sensors and actuators. Users simply hook up and read/control over simple web requests without having to write any code at all themselves, including firmware upgrades using OTA (Over The Air) updates. The ESP Easy firmware can be used to turn modules using one of the many processors made by Espressif into simple multifunction sensor and actuator devices for home automation platforms. Once the firmware is loaded on the hardware, configuration of ESP Easy is entirely web interface based.…
Article summary
ESP Easy is a free and open source MCU firmware for the Internet of things (IoT). and originally developed by the LetsControlIt.com community (formerly known as ESP8266.nu community). It runs on ESP8266 Wi-Fi based MCU (microcontroller unit) platforms for IoT from Espressif Systems. The name "ESP Easy," by default, refers to the firmware rather than the hardware on which it runs. At a low level, the ESP Easy firmware works the same as the NodeMCU firmware and also provides a very simple operating system on the ESP8266. The main difference between ESP Easy firmware and NodeMCU firmware is that the former is designed as a high-level toolbox that just works out-of-the-box for a pre-defined set of sensors and actuators. Users simply hook up and read/control over simple web requests without having to write any code at all themselves, including firmware upgrades using OTA (Over The Air) updates. The ESP Easy firmware can be used to turn modules using one of the many processors made by Espressif into simple multifunction sensor and actuator devices for home automation platforms. Once the firmware is loaded on the hardware, configuration of ESP Easy is entirely web interface based.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.