Lesson plan

Ethernet Global Data Protocol

Ethernet Global Data (EGD) is a protocol that enables producer (server) to share a portion of its memory to all the consumers (clients) at a scheduled periodic rate. This protocol is developed for GE Fanuc PLCs to exchange data between PLCs / Drive Systems / HMI/SCADA systems. The protocol uses UDP over Ethernet layers for exchanging the data. A snapshot of internal reference memory, mediated by an Ethernet interface, is referred to as an exchange. An exchange does not require a reply and is identified by a unique combination of three major identifiers. * The Producer ID (the producer's IP address) * The Exchange ID (the exchange's identifier) * The Adapter Name (the Ethernet interface identifier) EGD is implemented using classes. * Class 0 - supports configured exchanges only (implemented in most PACSystems CPUs) * Class 1 - supports all class 0 services plus programmed EGD exchanges that can be used to read and write other devices on an ad-hoc basis * Class 2 - supports all class 1 services plus acts as a responder for programmed EGD exchanges (implemented by Ethernet interface module only) * Class 3 - supports all class 2 services plus static configuration from an EGD configuration server * Class 4 - supports all class 3 services plus dynamically bound configuration from an EGD configuration server

Back to article

Article summary

Ethernet Global Data (EGD) is a protocol that enables producer (server) to share a portion of its memory to all the consumers (clients) at a scheduled periodic rate. This protocol is developed for GE Fanuc PLCs to exchange data between PLCs / Drive Systems / HMI/SCADA systems. The protocol uses UDP over Ethernet layers for exchanging the data. A snapshot of internal reference memory, mediated by an Ethernet interface, is referred to as an exchange. An exchange does not require a reply and is identified by a unique combination of three major identifiers. * The Producer ID (the producer's IP address) * The Exchange ID (the exchange's identifier) * The Adapter Name (the Ethernet interface identifier) EGD is implemented using classes. * Class 0 - supports configured exchanges only (implemented in most PACSystems CPUs) * Class 1 - supports all class 0 services plus programmed EGD exchanges that can be used to read and write other devices on an ad-hoc basis * Class 2 - supports all class 1 services plus acts as a responder for programmed EGD exchanges (implemented by Ethernet interface module only) * Class 3 - supports all class 2 services plus static configuration from an EGD configuration server * Class 4 - supports all class 3 services plus dynamically bound configuration from an EGD configuration server

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.