Lesson plan

ETOPS

ETOPS ( ) is an acronym for Extended-range Twin-engine Operations Performance Standards (or sometimes Extended Twin Overwater Passenger Service). These are safety standards set by the International Civil Aviation Organization (ICAO) for twin-engine commercial passenger aircraft operations. They are a safety measure intended to ensure that in the event of a single engine failure, an aircraft will still be able to reach a diversion airport using the remaining operational engine, albeit at a reduced speed or altitude. The standard typically applies to long-distance routes over water or remote areas, which were historically restricted to three- and four-engine aircraft. Twin-engine passenger airliners are typically restricted to areas within a one-hour flying time of a suitable airport on one operational engine. ETOPS-90 certification extends this to a 90-minute flying time, ETOPS-180 to 180 minutes, etc. Similar limits have since been applied to three- and four-engine airliners. In some cases, "ETOPS" is still used to refer to these rules, but other terminology has been introduced to remove "twin" from the acronym. ICAO introduced the term "Extended Diversion Time Operations" (EDTO) in 2017. The European Union Aviation Safety Agency previously used the term "Long Range Operations" (LROPS) for restrictions on airliners with three or four engines.

Back to article

Article summary

ETOPS ( ) is an acronym for Extended-range Twin-engine Operations Performance Standards (or sometimes Extended Twin Overwater Passenger Service). These are safety standards set by the International Civil Aviation Organization (ICAO) for twin-engine commercial passenger aircraft operations. They are a safety measure intended to ensure that in the event of a single engine failure, an aircraft will still be able to reach a diversion airport using the remaining operational engine, albeit at a reduced speed or altitude. The standard typically applies to long-distance routes over water or remote areas, which were historically restricted to three- and four-engine aircraft. Twin-engine passenger airliners are typically restricted to areas within a one-hour flying time of a suitable airport on one operational engine. ETOPS-90 certification extends this to a 90-minute flying time, ETOPS-180 to 180 minutes, etc. Similar limits have since been applied to three- and four-engine airliners. In some cases, "ETOPS" is still used to refer to these rules, but other terminology has been introduced to remove "twin" from the acronym. ICAO introduced the term "Extended Diversion Time Operations" (EDTO) in 2017. The European Union Aviation Safety Agency previously used the term "Long Range Operations" (LROPS) for restrictions on airliners with three or four engines.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.