Explorer 26

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Explorer 26 was a NASA satellite launched on 21 December 1964, as part of NASA's Explorer program. Its primary mission was to study the Earth's magnetic field.

Explorer 26 was a NASA satellite launched on 21 December 1964, as part of NASA's Explorer program. Its primary mission was to study the Earth's magnetic field. This experiment was designed to measure the directional fluxes and spectra of low-energy trapped and auroral protons and electrons. It employed a 5-mg-thick powder phosphor scintillator with a 1000-A aluminum coating. Additional absorbers were inserted in the detector aperture by a 16-position stepped wheel. The aperture was pointed at 45° to the spin axis. Due to the thinness and type of phosphor, the detector in the pulse mode would respond only to low-energy ions, and, therefore, essentially measured the flux of protons that penetrated the absorbers and stopped in the phosphor. Both the pulse counting rate and the phototube current were telemetered once each frame period. Sixteen readings were telemetered in each wheel position, and thus one complete set of data was obtained every 256 frames (one wheel revolution = 80 s). Protons in seven energy ranges were measured. The high-energy limit was about 10 MeV for all ranges, and the low-energy cutoffs were 97, 125, 168, 295, 495, 970, and 1700 keV. The energy fluxes of electrons in three ranges were measured separately using scatter geometry, absorbers, and the phototube current. The low-energy cutoffs were 17, 33, and 75 keV, and the high-energy cutoff was about 100 keV for all three ranges.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1336257159 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

11 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.