Exponential decay
≈ 9 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A quantity is subject to exponential decay if it decreases at a rate proportional to its current value. Symbolically, this process can be expressed by the following differential equation, where is the quantity and (lambda) is a positive rate called the exponential decay constant, disintegration constant, rate constant, or transformation constant: : \frac{dN(t)}{dt} = -\lambda N(t). The solution to this equation (see derivation below) is: : N(t) = N_0 e^{-\lambda t}, where is the quantity at time , is the initial quantity, that is, the quantity at time .
A quantity is subject to exponential decay if it decreases at a rate proportional to its current value. Symbolically, this process can be expressed by the following differential equation, where is the quantity and (lambda) is a positive rate called the exponential decay constant, disintegration constant, rate constant, or transformation constant: \frac{dN(t)}{dt} = -\lambda N(t). The solution to this equation (see derivation below) is: N(t) = N_0 e^{-\lambda t}, where is the quantity at time , is the initial quantity, that is, the quantity at time . \tau = \frac{1}{\lambda}. The mean lifetime can be looked at as a "scaling time", because the exponential decay equation can be written in terms of the mean lifetime, \tau , instead of the decay constant, λ: N(t) = N_0 e^{-t/\tau}, and that \tau is the time at which the population of the assembly is reduced to ≈ 0.367879441 times its initial value. This is equivalent to \log_{2}{e} ≈ 1.442695 half-lives. For example, if the initial population of the assembly, N(0), is 1000, then the population at time \tau , N(\tau) , is 368. A very similar equation will be seen below, which arises when the base of the exponential is chosen to be 2, rather than e. In that case the scaling time is the "half-life".
Half-life
A more intuitive characteristic of exponential decay for many people is the time required for the decaying quantity to fall to one half of its initial value. (If N(t) is discrete, then this is the median life-time rather than the mean life-time.) This time is called the half-life, and often denoted by the symbol t 1/2 . The half-life can be written in terms of the decay constant, or the mean lifetime, as: t_{1/2} = \frac{\ln (2)}{\lambda} = \tau \ln (2). When this expression is inserted for \tau in the exponential equation above, and ln 2 is absorbed into the base, this equation becomes: N(t) = N_0 2^{-t/t_{1/2}}. Thus, the amount of material left is 2 −1 = 1/2 raised to the (whole or fractional) number of half-lives that have passed. Thus, after 3 half-lives there will be 1/2 3 = 1/8 of the original material left. Therefore, the mean lifetime \tau is equal to the half-life divided by the natural log of 2, or: \tau = \frac{t_{1/2}}{\ln (2)} \approx 1.4427 \cdot t_{1/2}. For example, polonium-210 has a half-life of 138 days, and a mean lifetime of 200 days. \frac{dN(t)}{dt} = -\lambda N(t) or, by rearranging (applying the technique called separation of variables), \frac{dN(t)}{N(t)} = -\lambda dt. Integrating, we have \ln N = -\lambda t + C \, where C is the constant of integration, and hence N(t) = e^C e^{-\lambda t} = N_0 e^{-\lambda t} \, where the final substitution, N 0 = e C , is obtained by evaluating the equation at t = 0, as N 0 is defined as being the quantity at t = 0. This is the form of the equation that is most commonly used to describe exponential decay. Any one of decay constant, mean lifetime, or half-life is sufficient to characterise the decay. The notation λ for the decay constant is a remnant of the usual notation for an eigenvalue. In this case, λ is the eigenvalue of the negative of the differential operator with N(t) as the corresponding eigenfunction. N = N_0 e^{-\lambda t}, \, first let c be the normalizing factor to convert to a probability density function: 1 = \int_0^\infty c \cdot N_0 e^{-\lambda t}\, dt = c \cdot \frac{N_0}{\lambda} or, on rearranging, c = \frac{\lambda}{N_0}. Exponential decay is a scalar multiple of the exponential distribution (i.e. the individual lifetime of each object is exponentially distributed), which has a well-known expected value. We can compute it here using integration by parts. \tau = \langle t \rangle = \int_0^\infty t \cdot c \cdot N_0 e^{-\lambda t}\, dt = \int_0^\infty \lambda t e^{-\lambda t}\, dt = \frac{1}{\lambda}. -\frac{dN(t)}{dt} = N\lambda _1 + N\lambda _2 = (\lambda _1 + \lambda _2)N. The solution to this equation is given in the previous section, where the sum of \lambda _1 + \lambda _2\, is treated as a new total decay constant \lambda _c . N(t) = N_0 e^{-(\lambda _1 + \lambda _2) t} = N_0 e^{-(\lambda _c) t}. Partial mean life associated with individual processes is by definition the multiplicative inverse of corresponding partial decay constant: \tau = 1/\lambda . A combined \tau_c can be given in terms of \lambda s: \frac{1}{\tau_c} = \lambda_c = \lambda_1 + \lambda_2 = \frac{1}{\tau_1} + \frac{1}{\tau_2} \tau_c = \frac{\tau_1 \tau_2}{\tau_1 + \tau_2}. This is the Harmonic mean of \tau_1 and \tau_2 . Since half-lives differ from mean life \tau by a constant factor, the same equation holds in terms of the two corresponding half-lives: T_{1/2} = \frac{t_1 t_2}{t_1 + t_2} where T _{1/2} is the combined or total half-life for the process, t_1 and t_2 are so-named partial half-lives of corresponding processes. Terms "partial half-life" and "partial mean life" denote quantities derived from a decay constant as if the given decay mode were the only decay mode for the quantity. The term "partial half-life" is misleading, because it cannot be measured as a time interval for which a certain quantity is halved. In terms of separate decay constants, the total half-life T _{1/2} can be shown to be T_{1/2} = \frac{\ln 2}{\lambda _c} = \frac{\ln 2}{\lambda _1 + \lambda _2}. For a decay by three simultaneous exponential processes the total half-life can be computed as above: T_{1/2} = \frac{\ln 2}{\lambda _c} = \frac{\ln 2}{\lambda_1 + \lambda_2 + \lambda_3} = \frac{t_1 t_2 t_3}{(t_1 t_2) + (t_1 t_3) + (t_2 t_3)}. Electrostatics: In a RC circuit, the electric charge (or, equivalently, the potential) contained in a capacitor (capacitance C) discharges through a constant external load (resistance R) with exponential decay and similarly charges with the mirror image of exponential decay (when the capacitor is charged from a constant voltage source though a constant resistance). The exponential time-constant for the process is \tau = R \, C , so the half-life is R \, C \, \ln(2) . The same equations can be applied to the dual of current in an inductor. Furthermore, the particular case of a capacitor or inductor changing through several parallel resistors makes an interesting example of multiple decay processes, with each resistor representing a separate process. In fact, the expression for the equivalent resistance of two resistors in parallel mirrors the equation for the half-life with two decay processes. Geophysics: Atmospheric pressure decreases approximately exponentially with increasing height above sea level, at a rate of about 12% per 1000m. Heat transfer: If an object at one temperature is exposed to a medium of another temperature, the temperature difference between the object and the medium follows exponential decay (in the limit of slow processes; equivalent to "good" heat conduction inside the object, so that its temperature remains relatively uniform through its volume). See also Newton's law of cooling. Luminescence: After excitation, the emission intensity – which is proportional to the number of excited atoms or molecules – of a luminescent material decays exponentially. Depending on the number of mechanisms involved, the decay can be mono- or multi-exponential. Pharmacology and toxicology: It is found that many administered substances are distributed and metabolized (see clearance) according to exponential decay patterns. The biological half-lives "alpha half-life" and "beta half-life" of a substance measure how quickly a substance is distributed and eliminated. Physical optics: The intensity of electromagnetic radiation such as light or X-rays or gamma rays in an absorbent medium, follows an exponential decrease with distance into the absorbing medium. This is known as the Beer-Lambert law. Radioactivity: In a sample of a radionuclide that undergoes radioactive decay to a different state, the number of atoms in the original state follows exponential decay as long as the remaining number of atoms is large. The decay product is termed a radiogenic nuclide. Thermoelectricity: The decline in resistance of a Negative Temperature Coefficient Thermistor as temperature is increased. Vibrations: Some vibrations may decay exponentially; this characteristic is often found in damped mechanical oscillators, and used in creating ADSR envelopes in synthesizers. An overdamped system will simply return to equilibrium via an exponential decay. Beer froth: Arnd Leike, of LMU Munich, won an Ig Nobel Prize for demonstrating that beer froth obeys the law of exponential decay. Automobile braking is a universal example of exponential decay, and variation of the mathematical exponentials and functions which the foot applies are important to the comfort of the occupants and the avoidance of accidents. Finance: a retirement fund will decay exponentially being subject to discrete payout amounts, usually monthly, and an input subject to a continuous interest rate. A differential equation dA/dt = input − output can be written and solved to find the time to reach any amount A, remaining in the fund. In simple glottochronology, the (debatable) assumption of a constant decay rate in languages allows one to estimate the age of single languages. (To compute the time of split between two languages requires additional assumptions, independent of exponential decay).
See also
Exponential formula Exponential growth Radioactive decay for the mathematics of chains of exponential processes with differing constants
Notes
References
External links
Exponential decay calculator A stochastic simulation of exponential decay Tutorial on time constants
Text derived from https://en.wikipedia.org/w/index.php?oldid=1358231453 under CC BY-SA 4.0; modifications have been made.