Exponential integrate-and-fire

In biology exponential integrate-and-fire models are compact and computationally efficient nonlinear spiking neuron models with one or two variables.

Uses your system voice; voice and rate in settings.

≈ 4 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In biology exponential integrate-and-fire models are compact and computationally efficient nonlinear spiking neuron models with one or two variables. The exponential integrate-and-fire model was first proposed as a one-dimensional model.

The most prominent two-dimensional examples are the adaptive exponential integrate-and-fire model and the generalized exponential integrate-and-fire model. Exponential integrate-and-fire models are widely used in the field of computational neuroscience and spiking neural networks because of (i) a solid grounding of the neuron model in the field of experimental neuroscience, (ii) computational efficiency in simulations and hardware implementations, and (iii) mathematical transparency. \frac{dV}{dt} - \frac{R} {\tau_m} I(t)= \frac{1} {\tau_m}[E_m-V+\Delta_T \exp \left( \frac{V - V_T} {\Delta_T} \right)] . where V is the membrane potential, V_T is the intrinsic membrane potential threshold, \tau_m is the membrane time constant, E_m is the resting potential, and \Delta_T is the sharpness of action potential initiation, usually around 1 mV for cortical pyramidal neurons.

Once the membrane potential crosses V_T , it diverges to infinity in finite time. In numerical simulation the integration is stopped if the membrane potential hits an arbitrary threshold (much larger than V_T ) at which the membrane potential is reset to a value . The voltage reset value is one of the important parameters of the model.

Two important remarks: (i) The right-hand side of the above equation contains a nonlinearity that can be directly extracted from experimental data. In this sense the exponential nonlinearity is not an arbitrary choice but directly supported by experimental evidence.

(ii) Even though it is a nonlinear model, it is simple enough to calculate the firing rate for constant input, and the linear response to fluctuations, even in the presence of input noise. A didactive review of the exponential integrate-and-fire model (including fit to experimental data and relation to the Hodgkin-Huxley model) can be found in Chapter 5.2 of the textbook Neuronal Dynamics. \tau_m \frac{dV}{dt} = R I(t) + [E_m-V+\Delta_T \exp \left( \frac{V - V_T} {\Delta_T} \right)] - R w \tau \frac{d w (t)}{d t} = - a [V_\mathrm{m} (t) - E_\mathrm{m} ]- w + b \tau \delta (t-t^f) where denotes an adaptation current with time scale \tau .

Important model parameters are the voltage reset value , the intrinsic threshold V_T , the time constants \tau and \tau_m as well as the coupling parameters and . The adaptive exponential integrate-and-fire model inherits the experimentally derived voltage nonlinearity of the exponential integrate-and-fire model.

But going beyond this model, it can also account for a variety of neuronal firing patterns in response to constant stimulation, including adaptation, bursting and initial bursting. The adaptive exponential integrate-and-fire model is remarkable for three aspects: (i) its simplicity since it contains only two coupled variables; (ii) its foundation in experimental data since the nonlinearity of the voltage equation is extracted from experiments; and (iii) the broad spectrum of single-neuron firing patterns that can be described by an appropriate choice of AdEx model parameters.

In particular, the AdEx reproduces the following firing patterns in response to a step current input: neuronal adaptation, regular bursting, initial bursting, irregular firing, regular firing. A didactic review of the adaptive exponential integrate-and-fire model (including examples of single-neuron firing patterns) can be found in Chapter 6.1 of the textbook Neuronal Dynamics. \tau_m \frac{dV}{dt} = R I(t) + [E_m-V+\Delta_T \exp \left( \frac{V - V_T} {\Delta_T} \right)] - b \, [E_x-V] x \tau_x(V) \frac{d x (t)}{d t} = x_0(V_\mathrm{m} (t))- x where b is a coupling parameter, \tau_x(V) is a voltage-dependent time constant, and x_0(V) is a saturating nonlinearity, similar to the gating variable m of the Hodgkin-Huxley model.

The term b [E_x-V] x in the first equation can be considered as a slow voltage-activated ion current. The GEM is remarkable for two aspects: (i) the nonlinearity of the voltage equation is extracted from experiments; and (ii) the GEM is simple enough to enable a mathematical analysis of the stationary firing-rate and the linear response even in the presence of noisy input.

A review of the computational properties of the GEM and its relation to other spiking neuron models can be found in.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378362975 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001378362975 · captured 2026-10-04 · ledger · version history

Cite this page as: encyclopegia.org, “Exponential integrate-and-fire”, snapshot enwiki-001378362975. https://encyclopegia.org/a/exponential-integrate-and-fire

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.