Exponential response formula

Uses your system voice; voice and rate in settings.

Snapshot

≈ 13 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In mathematics, the exponential response formula (ERF), also known as exponential response and complex replacement, is a method used to find a particular solution of a non-homogeneous linear ordinary differential equation of any order. The exponential response formula is applicable to non-homogeneous linear ordinary differential equations with constant coefficients if the function is polynomial, sinusoidal, exponential or the combination of the three. The general solution of a non-homogeneous linear ordinary differential equation is a superposition of the general solution of the associated homogeneous ODE and a particular solution to the non-homogeneous ODE. Alternative methods for solving ordinary differential equations of higher order are method of undetermined coefficients and method of variation of parameters.

In mathematics, the exponential response formula (ERF), also known as exponential response and complex replacement, is a method used to find a particular solution of a non-homogeneous linear ordinary differential equation of any order. The exponential response formula is applicable to non-homogeneous linear ordinary differential equations with constant coefficients if the function is polynomial, sinusoidal, exponential or the combination of the three. The general solution of a non-homogeneous linear ordinary differential equation is a superposition of the general solution of the associated homogeneous ODE and a particular solution to the non-homogeneous ODE. Alternative methods for solving ordinary differential equations of higher order are method of undetermined coefficients and method of variation of parameters. The ERF method of finding a particular solution of a non-homogeneous differential equation is applicable if the non-homogeneous equation is or could be transformed to form f(t)=B_1e^{\gamma_1 t}+B_2e^{\gamma_2 t} + \cdots + B_n e^{\gamma_n t} ; where B, \gamma are real or complex numbers and f(t) is homogeneous linear differential equation of any order. Then, the exponential response formula can be applied to each term of the right side of such equation. Due to linearity, the exponential response formula can be applied as long as the right side has terms, which are added together by the superposition principle. Consider differential equation y+ y = \cos(t) . To make complex replacement, Euler's formula can be used; \begin{align} \cos(t) &= \operatorname{Re}(e^{i t}) = \operatorname{Re}(\cos(t)+i \sin(t)) \\ \sin(t) &= \operatorname{Im}(e^{i t}) = \operatorname{Im}(\cos(t)+i \sin(t)) \end{align} Therefore, given differential equation changes to z+ z = e^{it} . The solution of the complex differential equation can be found as z(t) , from which the real part is the solution of the original equation. Complex replacement is used for solving differential equations when the non-homogeneous term is expressed in terms of a sinusoidal function or an exponential function, which can be converted into a complex exponential function differentiation and integration. Such complex exponential function is easier to manipulate than the original function. When the non-homogeneous term is expressed as an exponential function, the ERF method or the undetermined coefficients method can be used to find a particular solution. If non-homogeneous terms can not be transformed to complex exponential function, then the Lagrange method of variation of parameters can be used to find solutions. a_n \frac{d^n y}{dt^n}+a_{n-1}\frac{d^{n-1}y}{dt^{n-1}}+ \cdots +a_1 \frac{dy}{dt}+a_0 y = f(t) \qquad \qquad \quad (1) and denoting L = a_n D^n+a_{n-1}D^{n-1}+ \cdots +a_1 D^1 +a_0 I, D^k = \frac{d^k}{dt^k} (k =1,2,\ldots,n), where a_0,\ldots,a_n are the constant coefficients, produces differential operator L , which is linear and time-invariant and known as the LTI operator. The operator, L is obtained from its characteristic polynomial; P(s)=a_n s^n+a_{n-1}s^{n-1}+\cdots+a_0 by formally replacing the indeterminate s here with the differentiation operator D L=P(D) P(D) = a_n D^n+a_{n-1}D^{n-1}+\cdots+a_0 I Therefore, the equation (1) can be written as P(D)y=f(t) \qquad \qquad \qquad \qquad \qquad \qquad \qquad \qquad \qquad (2) Considering LTI differential equation above, with exponential input f(t) = Be^{\gamma t} , where B and \gamma are given numbers. Then, a particular solution is {{Equation box 1 |indent =: |equation = y_p = \frac{B e^{\gamma t}}{P(\gamma)} \qquad |cellpadding= 6 |border |border colour = #0073CF |bgcolor=#F9FFF6}} provide only that P(\gamma)\neq 0 . Proof: Due to linearity of operator P(D) , the equation can be written as P(D)(y_p)= P(D)\left( \frac{B e^{\gamma t}}{P(\gamma)}\right)=\frac{B}{P(\gamma)} P(D)(e^{\gamma t}) \qquad \qquad (3) On the other hand, since P(D) \left (e^{\gamma t} \right ) = P(\gamma) e^{\gamma t}, substituting this into equation (3), produces P(D)(y_p)= P(D) \left( \frac{B e^{\gamma t}}{P(\gamma)}\right)=\frac{B}{P(\gamma)} P(D) \left(e^{\gamma t} \right) = \frac{B}{P(\gamma)} P(\gamma) e^{\gamma t} = B e^{\gamma t}. Therefore, y_p is a particular solution to the non-homogeneous differential equation. Thus, the above equation for a particular response y_p is called the exponential response formula (ERF) for the given exponential input. In particular, in case of P(\gamma) = 0 , a solution to equation (2) is given by y_p = \frac{Bte^{\gamma t}}{P'(\gamma)}, \qquad P'(\gamma) \neq 0 and is called the resonant response formula. 2x+x'+x = 1 + 2e^t + e^{-t}\cos(t). The characteristic polynomial is P(s) = 2s^2+s+1 . Also, the non-homogeneous term, f(t) = 1+2e^t+e^{-t}\cos(t) can be written as follows f(t) = f_1(t)+f_2(t)+f_3(t), f_1(t) = 1, f_2(t) = 2e^t, f_3(t)=e^{-t}\cos(t). Then, the particular solutions corresponding to f_1(t), f_2(t) and f_3(t) , are found, respectively. First, considering non-homogeneous term, f_1(t)=1 . In this case, since f_1(t)=1=e^{0 \cdot t}, \gamma = 0 and P(\gamma) = P(0) = 1 \neq 0 . from the ERF, a particular solution corresponding to f_1(t) can be found. x_{1p} = \frac{f_1(t)}{P(0)} = \frac{1}{1} = 1 . Similarly, a particular solution can be found corresponding to f_2(t) . x_{2p} = \frac{f_2(t)}{P(1)} = \frac{2e^t}{4} = \frac{e^t}{2}. Let's find a particular solution to DE corresponding to 3rd term; 2x+x'+x = e^{-t}\cos(t). In order to do this, equation must be replaced by complex-valued equation, of which it is the real part: 2z+z'+z = e^{(-1+i)t}. Applying the exponential response formula (ERF), produces \begin{align} z_p &= \frac{e^{(-1+i)t}}{P(-1+i)} \\ &=\frac{ie^{(-1+i)t}}{3} && P(-1+i)=2(-1+i)^2+(-1+i)+1=-3i \end{align} and the real part is x_{3p}=-\frac{1}{3}e^{-t}\sin(t). Therefore, the particular solution of given equation, x_p is x_p=x_{1p}+x_{2p}+x_{3p}=1+\frac{e^t}{2}-\frac{1}{3}e^{-t}\sin(t). For example, finding a particular solution of y+y=e^t with the method of undetermined coefficients requires solving the characteristic equation \lambda^2 + 1=0, \lambda = \pm i . The non-homogeneous term f(t)=Be^{\gamma t}, B=1, \gamma = 1 is then considered and since \gamma =1 is not a characteristic root, it puts a particular solution in form of y_p(t) = Ae^{\gamma t} , where A is undetermined constant. Substituting into the equation to determine the tentative constant yields \lambda^2 A e^{\lambda t}+Ae^{\lambda t} = e^{\lambda t} therefore A = \frac{1}{\lambda^2+1}. The particular solution can be found in form: y_p(t) = Ae^{\lambda t} = \frac{e^{\lambda t}}{\lambda^2+1}. On the other hand, the exponential response formula method requires characteristic polynomial P(s)=s^2+1 to be found, after which the non-homogeneous terms f(t)=Be^{\gamma t}, B=1, \gamma = 1 is complex replaced. The particular solution is then found using formula y_p(t) = \frac{e^{\lambda t}}{P(\lambda)}= \frac{e^{\lambda t}}{\lambda^2+1}. The exponential response formula method was discussed in case of P(\gamma ) \neq 0 . In the case of P(\gamma ) = 0, P'(\gamma ) \neq 0 , the resonant response formula is also considered. In the case of P(\gamma)=P'(\gamma)=\cdots=P^{(k-1)}(\gamma)=0, P^k(\gamma)\neq 0 , we will discuss how the ERF method will be described in this section. Let P(D) be a polynomial operator with constant coefficients, and P^{(m)} its m -th derivative. Then ODE P(D)y = Be^{\gamma t} , where \gamma is real or complex. has the particular solution as following. P(\gamma)\neq 0 . In this case, a particular solution will be given by y_p(t)=\tfrac{Be^{\gamma t}}{P(\gamma)} .(exponent response formula) P(\gamma)=0 but P'(\gamma)\neq 0 . In this case, a particular solution will be given by y_p(t) =\tfrac{Bte^{\gamma t}}{P'(\gamma)} .(resonant response formula) P(\gamma)=P'(\gamma)=\cdots=P^{(k-1)}(\gamma)=0 but P^k(\gamma)\neq 0 . In this case, a particular solution will be given by {{Equation box 1 |indent =: |equation = y_p(t)=\frac{Bt^k e^{\gamma t}}{P^{(k)}(\gamma)}, k=2,\ldots,m |cellpadding= 6 |border |border colour = #0073CF |bgcolor=#F9FFF6}} Above equation is called generalized exponential response formula. y-3y'+2y = 6e^t. the characteristic polynomial is P(s) = s^3-3s+2 . By the calculating, we get the following: P(1)=0,P'(1)=0, P(1)=6 \neq 0. Original exponential response formula is not applicable to this case due to division by zero. Therefore, using the generalized exponential response formula and calculated constants, particular solution is y_p(t)=\frac{6t^2 e^t}{P(1)}=\frac{6t^2 e^t}6 = t^2 e^t. m \frac{d^2 x}{dt^2}+r\frac{dx}{dt}+kx = F(t), where F(t) is external force. Now, assuming drag is neglected and F(t) = F_0\cos(\omega t) , where \omega =\sqrt{\tfrac{k}{m}} (the external force frequency coincides with the natural frequency). Therefore, the harmonic oscillator with sinusoidal forcing term is expressed as following: m \frac{d^2 x}{dt^2}+kx = F(t). Then, a particular solution is x_p = \frac{F_0}{2\sqrt{km}}t\sin(\omega t). Applying complex replacement and the ERF: if z_p is a solution to the complex DE m \frac{d^2 z}{dt^2}+kz = F_0 e^{i\omega t}, then x_p=\operatorname{Re}(z_p) will be a solution to the given DE. The characteristic polynomial is P(s) = m s^2+k , and \gamma = i\omega , so that P(\gamma) = 0 . However, since P'(s) = 2ms , then P'(\gamma)=P'(i\omega)=2m\omega i \neq 0 . Thus, the resonant case of the ERF gives \begin{align} y_p & = \operatorname{Re}\left( \frac{F_0 te^{i\omega t}}{P'(\gamma)}\right) \\[4pt] &= \operatorname{Re}\left( \frac{F_0 t(\cos(\omega t)+i\sin(\omega t))}{2mi\omega}\right) \\[4pt] & = \operatorname{Re}\left( \frac{-F_0 t(i\cos(\omega t)-\sin(\omega t))}{2m\omega}\right) \\[4pt] & = \frac{F_0 t \sin(\omega t)}{2m\omega} \\[4pt] &=\frac{F_0}{2\sqrt{km}}t\sin(\omega t). \end{align} LI'(t)+RI(t)+\frac 1 C \int_{t_0}^t I(s) \, ds = \int_{t_0}^t E(s)\,ds Differentiating both sides of the above equation, produces the following ODE. LI(t)+RI'(t)+\frac{1}{C} I(t) = E(t) Now, assuming E(t)=E_0\sin(\omega_0 t) , where \omega_0=\sqrt{\tfrac{1}{LC}} . ( \omega_0 is called resonance frequency in LRC circuit). Under above assumption, the output (particular solution) corresponding to input E(t) can be found. In order to do it, given input can be converted in complex form: E(t)=E_0 \sin(\omega_0 t) = \operatorname{Im}(E_0 e^{i \omega_0 t}) The characteristic polynomial is P(s) = Ls^2+Rs+\frac{1}{s} , where P(i\omega_0)=i\omega_0 R\neq 0 . Therefore, from the ERF, a particular solution can be obtained as follows; \begin{align} I_p & = \operatorname{Im} \left( \frac{E_0 e^{i\omega_0 t}}{P(i\omega_0)} \right) \\ &= \operatorname{Im} \left( \frac{E_0 e^{i\omega_0 t}}{i\omega_0 R} \right) \\ &= \operatorname{Im} \left( \frac{-E_0(i\cos(\omega_0 t)-\sin(\omega_0 t))}{\omega_0 R} \right) \\[4pt] & = \frac{-E_0 \cos(\omega_0 t)}{\omega_0 R} \end{align} P(D)x = Q(D)f(t) where f(t) is the input and P(D), Q(D) are given polynomial operators, while assuming that P(s)\neq 0 . In case that f(r) = F_0\cos(\omega t) , a particular solution to given equation is x_p(t) = \operatorname{Re}\left ( F_0 \frac{Q(i\omega)}{P(i\omega)}e^{i\omega t}\right). Considering the following concepts used in physics and signal processing mainly. The amplitude of the input is F_0 . This has the same units as the input quantity. The angular frequency of the input is \omega . It has units of radians/time. Often it will be referred to it as frequency, even though technically frequency should have units of cycles/time. The amplitude of the response is A = F_0|Q(i\omega)/P(i\omega)| . This has the same units as the response quantity. The gain is g(\omega) = |Q(i\omega)/P (i\omega)| . The gain is the factor that the input amplitude is multiplied by to get the amplitude of the response. It has the units needed to convert input units to output units. The phase lag is \phi = -\operatorname{Arg}(Q(i\omega)/P(i\omega)) . The phase lag has units of radians, i.e. it’s dimensionless. The time lag is \phi/ \omega . This has units of time. It is the time that peak of the output lags behind that of the input. The complex gain is Q(i\omega)/P(i\omega) . This is the factor that the complex input is multiplied by to get the complex output.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1353666920 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001353666920 · captured 1778512506.0 · version history

Cite this page as: encyclopegia.org, “Exponential response formula”, snapshot enwiki-001353666920. https://encyclopegia.org/a/exponential-response-formula

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.