{
  "id": "enwiki-001373665070",
  "slug": "f-number",
  "title": "F-number",
  "qid": "",
  "lead": "s, that is, increasing f-numbers, in one-stop increments; each aperture has half the light-gathering area of the previous one. An f-number is a measure of the light-gathering ability of an optical system such as a camera lens. It is defined as the ratio of the system's focal length to the diameter of the entrance pupil (\"clear aperture\"). The f-number is also known as the focal ratio, f-ratio, or f-stop, and it is key in determining the depth of field, diffraction, and exposure of a photograph. The f-number is dimensionless and is usually expressed using a lower-case hooked f with the format N, where N is the f-number. The f-number is also known as the inverse relative aperture, because it is the inverse of the relative aperture, defined as the aperture diameter divided by the focal length. A lower f-number means a larger relative aperture and more light entering the system, while a higher f-number means a smaller relative aperture and less light entering the system. The f-number is related to the numerical aperture (NA) of the system, which measures the range of angles over which light can enter or exit the system. The numerical aperture takes into account the refractive index of the medium in which the system is working, while the f-number does not. The f-number is used as an indication of the light-gathering ability of a lens, i.e.…",
  "body": "s, that is, increasing f-numbers, in one-stop increments; each aperture has half the light-gathering area of the previous one. An f-number is a measure of the light-gathering ability of an optical system such as a camera lens. It is defined as the ratio of the system's focal length to the diameter of the entrance pupil (\"clear aperture\"). The f-number is also known as the focal ratio, f-ratio, or f-stop, and it is key in determining the depth of field, diffraction, and exposure of a photograph. The f-number is dimensionless and is usually expressed using a lower-case hooked f with the format N, where N is the f-number. The f-number is also known as the inverse relative aperture, because it is the inverse of the relative aperture, defined as the aperture diameter divided by the focal length. A lower f-number means a larger relative aperture and more light entering the system, while a higher f-number means a smaller relative aperture and less light entering the system. The f-number is related to the numerical aperture (NA) of the system, which measures the range of angles over which light can enter or exit the system. The numerical aperture takes into account the refractive index of the medium in which the system is working, while the f-number does not. The f-number is used as an indication of the light-gathering ability of a lens, i.e. the illuminance it delivers to the film or sensor for a given subject luminance. Although this usage is common, it is an approximation that ignores the effects of the focusing distance and the light transmission of the lens. When these effects cannot be ignored, the working f-number or the T-stop is used instead of the f-number. N = \\frac{f}{D} \\ where is the focal length, and is the diameter of the entrance pupil (effective aperture). It is customary to write f-numbers preceded by \" \", which forms a mathematical expression of the entrance pupil's diameter in terms of and . For example, if a lens's focal length were and its entrance pupil's diameter were , the f-number would be 2. This would be expressed as in a lens system. The aperture diameter would be equal to . Camera lenses often include an adjustable diaphragm, which changes the size of the aperture stop and thus the entrance pupil size. This allows the user to vary the f-number as needed. The entrance pupil diameter is not necessarily equal to the aperture stop diameter, because of the magnifying effect of lens elements in front of the aperture. Ignoring differences in light transmission efficiency, a lens with a greater f-number projects darker images. The brightness of the projected image (illuminance) relative to the brightness of the scene in the lens's field of view (luminance) decreases with the square of the f-number. A focal length lens has an entrance pupil diameter of . A focal length lens has an entrance pupil diameter of . Since the area is proportional to the square of the pupil diameter, the amount of light admitted by the lens is four times that of the lens. To obtain the same photographic exposure, the exposure time must be reduced by a factor of four. A focal length lens has an entrance pupil diameter of . The lens's entrance pupil has four times the area of the lens's entrance pupil, and thus collects four times as much light from each object in the lens's field of view. But compared to the lens, the lens projects an image of each object twice as high and twice as wide, covering four times the area, and so both lenses produce the same illuminance at the focal plane when imaging a scene of a given luminance. f/1 = \\frac{f}{(\\sqrt{2})^0},\\ f/1.4 = \\frac{f}{(\\sqrt{2})^1},\\ f/2 = \\frac{f}{(\\sqrt{2})^2},\\ f/2.8 = \\frac{f}{(\\sqrt{2})^3},\\ \\ldots In the same way as one f-stop corresponds to a factor of two in light intensity, shutter speeds are arranged so that each setting differs in duration by a factor of approximately two from its neighbour. Opening up a lens by one stop allows twice as much light to fall on the film in a given period of time. Therefore, to have the same exposure at this larger aperture as at the previous aperture, the shutter would be opened for half as long (i.e., twice the speed). The film will respond equally to these equal amounts of light, since it has the property of reciprocity. This is less true for extremely long or short exposures, where there is reciprocity failure. Aperture, shutter speed, and film sensitivity are linked: for constant scene brightness, doubling the aperture area (one stop), halving the shutter speed (doubling the time open), or using a film twice as sensitive, has the same effect on the exposed image. For all practical purposes extreme accuracy is not required (mechanical shutter speeds were notoriously inaccurate as wear and lubrication varied, with no effect on exposure). It is not significant that aperture areas and shutter speeds do not vary by a factor of precisely two. Photographers sometimes express other exposure ratios in terms of 'stops'. Ignoring the f-number markings, the f-stops make a logarithmic scale of exposure intensity. Given this interpretation, one can then think of taking a half-step along this scale, to make an exposure difference of a \"half stop\". f/4.5,\\ f/5,\\ f/5.6,\\ f/6.3,\\ f/7.1,\\ f/8,\\ \\ldots To calculate the steps in a full stop (1 EV) one could use (\\sqrt{2})^{0},\\ (\\sqrt{2})^{1},\\ (\\sqrt{2})^{2},\\ (\\sqrt{2})^{3},\\ (\\sqrt{2})^{4},\\ \\ldots The steps in a half stop ( EV) series would be (\\sqrt{2})^{\\frac{0}{2}},\\ (\\sqrt{2})^{\\frac{1}{2}},\\ (\\sqrt{2})^{\\frac{2}{2}},\\ (\\sqrt{2})^{\\frac{3}{2}},\\ (\\sqrt{2})^{\\frac{4}{2}},\\ \\ldots The steps in a third stop ( EV) series would be (\\sqrt{2})^{\\frac{0}{3}},\\ (\\sqrt{2})^{\\frac{1}{3}},\\ (\\sqrt{2})^{\\frac{2}{3}},\\ (\\sqrt{2})^{\\frac{3}{3}},\\ (\\sqrt{2})^{\\frac{4}{3}},\\ \\ldots As in the earlier DIN and ASA film-speed standards, the ISO speed is defined only in one-third stop increments, and shutter speeds of digital cameras are commonly on the same scale in reciprocal seconds. A portion of the ISO range is the sequence \\ldots 16/13^\\circ,\\ 20/14^\\circ,\\ 25/15^\\circ,\\ 32/16^\\circ,\\ 40/17^\\circ,\\ 50/18^\\circ,\\ 64/19^\\circ,\\ 80/20^\\circ,\\ 100/21^\\circ,\\ 125/22^\\circ,\\ \\ldots while shutter speeds in reciprocal seconds have a few conventional differences in their numbers ( , , and second instead of , , and ). In practice the maximum aperture of a lens is often not an integral power of (i.e., to the power of a whole number), in which case it is usually a half or third stop above or below an integral power of . Modern electronically controlled interchangeable lenses, such as those used for SLR cameras, have f-stops specified internally in -stop increments, so the cameras' -stop settings are approximated by the nearest -stop setting in the lens. N = \\sqrt{2^{\\text{AV}}} Conventional and calculated f-numbers, full-stop series: H = E t where is the illuminance falling on that surface and is the exposure time. The illuminance in turn depends on the brightness of the subject being photographed, and on the aperture of the lens. If we assume the lens has no transmission losses and is focused at infinity, the image-plane illuminance is: E = L \\frac{\\pi}{4N^2} where is the subject luminance (an objective measure of its brightness). If the lens is focused at close range, the illuminance is lower, and this can be accounted for by replacing the f-number with the so-called “working f-number”. In the same vein, if the transmission losses cannot be neglected, the f-number should be replaced by the T-stop. N_w \\approx {1 \\over 2 \\mathrm{NA}_i} \\approx \\left(1+\\frac {P}\\right)N\\,, where is the uncorrected f-number, is the image-space numerical aperture of the lens, |m| is the absolute value of the lens's magnification for an object a particular distance away, and is the pupil magnification. Since the pupil magnification is seldom known it is often assumed to be 1, which is the correct value for all symmetric lenses. In photography this means that as one focuses closer, the lens's effective aperture becomes smaller, making the exposure darker. The working f-number is often described in photography as the f-number corrected for lens extensions by a bellows factor. This is of particular importance in macro photography. T = \\frac{N}{\\sqrt{\\text{transmittance}}}. For example, an lens with transmittance of 75% has a T-stop of 2.3: T = \\frac{2.0}{\\sqrt{0.75}} = 2.309... Since real lenses have transmittances of less than 100%, a lens's T-stop number is always greater than its f-number. With 8% loss per air-glass surface on lenses without coating, multicoating of lenses is the key in lens design to decrease transmittance losses of lenses. Some reviews of lenses do measure the T-stop or transmission rate in their benchmarks. T-stops are sometimes used instead of f-numbers to more accurately determine exposure, particularly when using external light meters. Lens transmittances of 60%–95% are typical. T-stops are often used in cinematography, where many images are seen in rapid succession and even small changes in exposure will be noticeable. Cinema camera lenses are typically calibrated in T-stops instead of f-numbers. In still photography, without the need for rigorous consistency of all lenses and cameras used, slight differences in exposure are less important; however, T-stops are still used in some kinds of special-purpose lenses such as Smooth Trans Focus lenses by Minolta and Sony. == Focal ratio in telescopes == of a simple optical system where f is the focal length and D is the diameter of the objective In astronomy, the f-number is commonly referred to as the focal ratio (or f-ratio) notated as N . It is still defined as the focal length f of an objective divided by its diameter D or by the diameter of an aperture stop in the system: N = \\frac fD \\quad \\xrightarrow {\\times D} \\quad f = ND Even though the principles of focal ratio are always the same, the application to which the principle is put can differ. In photography the focal ratio varies the focal-plane illuminance (or optical power per unit area in the image) and is used to control variables such as depth of field. When using an optical telescope in astronomy, there is no depth of field issue, and the brightness of stellar point sources in terms of total optical power (not divided by area) is a function of absolute aperture area only, independent of focal length. The focal length controls the field of view of the instrument and the scale of the image that is presented at the focal plane to an eyepiece, film plate, or CCD. For example, the SOAR four-meter telescope has a small field of view (about ) which is useful for stellar studies. The LSST 8.4&nbsp;m telescope, which will cover the entire sky every three days, has a very large field of view. Its short 10.3&nbsp;m focal length ( ) is made possible by an error correction system which includes secondary and tertiary mirrors, a three element refractive system and active mounting and optics.",
  "categories": [
    "104314949",
    "107141658",
    "22900968",
    "22901753",
    "22931865",
    "23118434",
    "2330768",
    "23603337",
    "24623845",
    "24745122",
    "28269686",
    "29265046",
    "41731684",
    "59265545"
  ],
  "license": "CC BY-SA 4.0",
  "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1373665070",
  "content_hash": "",
  "created_at": null,
  "updated_at": 1788749859.0,
  "claims": [],
  "contradictions": [],
  "confidence": 0.6,
  "csl": {
    "id": "enwiki-001373665070",
    "type": "webpage",
    "title": "F-number",
    "author": [
      {
        "family": "Anticloud FZ LLE",
        "literal": "Anticloud FZ LLE"
      }
    ],
    "container-title": "encyclopegia.org",
    "publisher": "Anticloud FZ LLE",
    "publisher-place": "Dubai, United Arab Emirates",
    "URL": "https://encyclopegia.org/a/f-number",
    "issued": {
      "date-parts": [
        [
          2026,
          11,
          22
        ]
      ]
    },
    "accessed": {
      "date-parts": [
        [
          2026,
          11,
          22
        ]
      ]
    },
    "license": "CC BY-SA 4.0",
    "DOI": "eo1:enwiki-001373665070",
    "isBasedOn": "https://en.wikipedia.org/w/index.php?oldid=1373665070",
    "note": "Immutable snapshot enwiki-001373665070"
  }
}