Lesson plan
FastPath
The Kinetics FastPath was a LocalTalk-to-Ethernet bridge (now referred to as a router) created in 1985 to allow Apple Macintosh computers (which at the time only had LocalTalk network connections) to communicate with other computers on Ethernet networks. The product had five significant revisions (known as KFPS-1 through KFPS-5) during its lifetime and was ultimately sold to Shiva Corporation late in its existence. The original FastPath was developed to extend AppleTalk on Ethernet for Apple Computer, but from the beginning it was also modeled after an implementation of the Stanford Ethernet–AppleTalk Gateway (SEAGATE) created at Stanford University Medical Center by Bill Croft in 1984 and 1985. SEAGATE was a combination of hardware and software that picked up IP packets from the Ethernet network and encapsulated them inside of DDP packets on the AppleTalk network and conversely picked up specially-encoded DDP packets on the AppleTalk network and placed them on the Ethernet network as IP packets. Although a few sites used the original SEAGATE multibus hardware as defined, it served as a proof-of-concept and was eclipsed by the Kinetics FastPath and similar hardware gateways by other companies. However, many university and research FastPath owners continued to be able to run the Stanford gateway software (later called KIP incorporating MacIP) inside the Kinetics FastPath.…
Article summary
The Kinetics FastPath was a LocalTalk-to-Ethernet bridge (now referred to as a router) created in 1985 to allow Apple Macintosh computers (which at the time only had LocalTalk network connections) to communicate with other computers on Ethernet networks. The product had five significant revisions (known as KFPS-1 through KFPS-5) during its lifetime and was ultimately sold to Shiva Corporation late in its existence. The original FastPath was developed to extend AppleTalk on Ethernet for Apple Computer, but from the beginning it was also modeled after an implementation of the Stanford Ethernet–AppleTalk Gateway (SEAGATE) created at Stanford University Medical Center by Bill Croft in 1984 and 1985. SEAGATE was a combination of hardware and software that picked up IP packets from the Ethernet network and encapsulated them inside of DDP packets on the AppleTalk network and conversely picked up specially-encoded DDP packets on the AppleTalk network and placed them on the Ethernet network as IP packets. Although a few sites used the original SEAGATE multibus hardware as defined, it served as a proof-of-concept and was eclipsed by the Kinetics FastPath and similar hardware gateways by other companies. However, many university and research FastPath owners continued to be able to run the Stanford gateway software (later called KIP incorporating MacIP) inside the Kinetics FastPath.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.