Lesson plan
Fender Harvard
The Fender Harvard is a vacuum tube (valve) guitar amplifier made by Fender from 1955 to 1963. The Harvard appeared only in a tweed covered "narrow-panel" cabinet, but in two very different circuit designs, namely 5F10 (1955–61) and 6G10 (1962–63). The "Tweed" 5F10 model, launched in 1955, but not in time for the Fender catalog of that year, was a 10-watt amplifier utilising a 6AV6 (from 1956 a 6AT6) preamplifier tube, 12AX7 phase inverter tube, a pair of 6V6GT power amplifier tubes, and one 5Y3GT rectifier tube, with a Jensen P10R 10-inch speaker. The amplifier had a very simple circuit and used only a single channel with a two-stage preamp, with just a volume and (treble-cut) tone control. The Harvard was a fixed bias amplifier, using a basic cathodyne phase inverter, but did include a selenium rectifier in the bias circuit. The 5F10 was discontinued in 1961. The extremely rare 1962–63 6G10 Harvard used a single 12AX7, 6V6GT and 5Y3GT; it was simply a way to use up leftover 50's Princeton (5F2-A) chassis and tweed cabinets, after Fender had re-launched an all-new class AB Princeton (6G2) in a Tolex-covered "brownface" version. These Harvards sometimes even use old 5F2-A tube charts with the Princeton name scratched out; they can be identified by their Schumacher transformers (the same ones used in the new brown Princeton) and 1960s date stamps.…
Article summary
The Fender Harvard is a vacuum tube (valve) guitar amplifier made by Fender from 1955 to 1963. The Harvard appeared only in a tweed covered "narrow-panel" cabinet, but in two very different circuit designs, namely 5F10 (1955–61) and 6G10 (1962–63). The "Tweed" 5F10 model, launched in 1955, but not in time for the Fender catalog of that year, was a 10-watt amplifier utilising a 6AV6 (from 1956 a 6AT6) preamplifier tube, 12AX7 phase inverter tube, a pair of 6V6GT power amplifier tubes, and one 5Y3GT rectifier tube, with a Jensen P10R 10-inch speaker. The amplifier had a very simple circuit and used only a single channel with a two-stage preamp, with just a volume and (treble-cut) tone control. The Harvard was a fixed bias amplifier, using a basic cathodyne phase inverter, but did include a selenium rectifier in the bias circuit. The 5F10 was discontinued in 1961. The extremely rare 1962–63 6G10 Harvard used a single 12AX7, 6V6GT and 5Y3GT; it was simply a way to use up leftover 50's Princeton (5F2-A) chassis and tweed cabinets, after Fender had re-launched an all-new class AB Princeton (6G2) in a Tolex-covered "brownface" version. These Harvards sometimes even use old 5F2-A tube charts with the Princeton name scratched out; they can be identified by their Schumacher transformers (the same ones used in the new brown Princeton) and 1960s date stamps.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.