Lesson plan
Fenestron
B A Fenestron (sometimes alternatively referred to as a fantail or a "fan-in-fin" arrangement ) is an enclosed helicopter tail rotor that operates like a ducted fan. The term Fenestron is a trademark of multinational helicopter manufacturing consortium Airbus Helicopters (formerly known as Eurocopter). The word itself comes from the Occitan term for a small window, and is ultimately derived from the Latin word fenestra for window. Like the conventional tail rotor it replaces, a Fenestron counteracts the torque generated by the main rotor. However, it differs from a conventional open tail rotor by being integrally housed within the tail boom. While conventional tail rotors typically have between two and six blades, Fenestrons have between seven and eighteen blades; these may have variable angular spacing so that the noise is distributed over different frequencies. By placing the fan within a duct, several distinct advantages over a conventional tail rotor are obtained, such as a reduction in tip vortex losses and the potential for substantial noise reduction, while also shielding both the tail rotor itself from collision damage and ground personnel from the hazard posed by a traditional spinning rotor.…
Article summary
B A Fenestron (sometimes alternatively referred to as a fantail or a "fan-in-fin" arrangement ) is an enclosed helicopter tail rotor that operates like a ducted fan. The term Fenestron is a trademark of multinational helicopter manufacturing consortium Airbus Helicopters (formerly known as Eurocopter). The word itself comes from the Occitan term for a small window, and is ultimately derived from the Latin word fenestra for window. Like the conventional tail rotor it replaces, a Fenestron counteracts the torque generated by the main rotor. However, it differs from a conventional open tail rotor by being integrally housed within the tail boom. While conventional tail rotors typically have between two and six blades, Fenestrons have between seven and eighteen blades; these may have variable angular spacing so that the noise is distributed over different frequencies. By placing the fan within a duct, several distinct advantages over a conventional tail rotor are obtained, such as a reduction in tip vortex losses and the potential for substantial noise reduction, while also shielding both the tail rotor itself from collision damage and ground personnel from the hazard posed by a traditional spinning rotor.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.