Ferrari SP
The Ferrari SP (also known as the Ferrari Dino SP) was a series of Italian sports prototype racing cars produced by Ferrari during the early 1960s.
≈ 10 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The Ferrari SP (also known as the Ferrari Dino SP) was a series of Italian sports prototype racing cars produced by Ferrari during the early 1960s. All featured a rear mid-engine layout, a first for a Ferrari sports car. Major racing accolades include the 1962 European Hill Climb Championship, two overall Targa Florio victories, in 1961 and 1962, and "1962 Coupe des Sports" title.
At first the SP-series used Vittorio Jano-designed, V6 Dino engines in both SOHC 60° and DOHC 65° forms. Later, Ferrari introduced a new SOHC 90° V8 engine designed by Carlo Chiti. All used dry sump lubrication and were mated to a 5-speed manual transmission.
In total only six chassis were produced with various engine configurations. Many times they were modified and converted into a different specification. The tubular steel chassis, tipo 561, featured all-round independent suspension and disc brakes.
All shared the same wheelbase and open body style with some variations. The rear mid-engine layout experience was soon carried over to the V12-powered Ferrari P-series of sports prototypes. They arrived in 1963.
Later, by 1965, Ferrari introduced their first mid-engined Dino sports prototype, the 166 P, powered by a V6 engine. The Chiti V8 engine did not carry over to any successor.
246 SP
At the 1961 special press conference, Ferrari unveiled their first mid-engined sports car, the Ferrari 246 SP. Although the front-engined 250 Testa Rossa had many racing successes during the late 1950s, the emergence of rear engine competitors in Grand Prix and sports car racing indicated that Ferrari required new design to stay competitive.
Enzo Ferrari publicly denied in January 1959 that a rear engine car was in the works, however during this same year he privately tasked Carlo Chiti with developing both a rear engine Formula One car and a rear engine sports car, to be introduced by the 1961 racing season. Chiti decided Jano's existing 2.4 litre 65° Dino V6 design was suitable for use in both of these designs, due to its light weight and compact size.
Development work proceeded through 1960 and early 1961, with the 246 SP completed in time for the 13 February 1961 press conference where it was introduced to the public. The model proved its capabilities at the 1961 Targa Florio, which Wolfgang von Trips and Olivier Gendebien had won outright.
With this the 246 SP scored one more point for the 1961 World Sportscar Championship for Ferrari. For the 1962 World Sportscar Championship in the Sportscar class cars under 3000 cc, the 246 SP won two out of three rounds, including the 1962 Targa Florio and "1962 Coupe des Sports" title for Ferrari.
Only two cars were produced (chassis 0790 and 0796 ) and both were later converted into other types, with 0790 becoming a 196 SP in early 1963 and 0796 becoming a 250 P test mule before being destroyed in a crash.
Engine and transmission
The engine, mounted longitudinally and amidships, was a Tipo 171S 65° Dino V6 unit based on the earlier Tipo 143 used in the 246 F1. The block and heads were cast from Silumin alloy.
The total capacity of from of bore and stroke was the same as the engines used in the 246 F1 and the 1960 Dino 246 S. The 65° engine had twin overhead camshafts per cylinder bank driven by a timing chain, two valves per cylinder, and a 9.8:1 compression ratio. Resulting power was at 8000 rpm.
The engine was fed by three Weber 42DCN carburettors and used two 14mm Marchal spark plugs per cylinder with two coils and Magnetti Marelli distributors. A dry sump lubrication system was used, with pumps for oil pressure/scavenging driven off the cams. The oil cooler and reservoir were located in the front of the vehicle.
Two engine short blocks were manufactured for each 246 SP chassis, with a single set of cylinder heads swapped between them as needed. The 246 SP used a 5 speed transaxle designed by Engineer Giorgio Salvarani, similar to that used in the 156 F1. It was mounted to the rear of the car, behind the engine.
It integrated in a compact package 5 straight cut, non-synchromesh forward gears, one reverse gear, a hydraulically actuated multi-plate clutch, a ZF-style limited slip differential and mountings for inboard disc brakes. This transmission was shared among all Dino SP series cars.
196 SP
The 1962 Ferrari 196 SP was a smaller-engined variation on the original 246 SP design, equipped with a 2.0-litre, SOHC 60° V6 Tipo 190 engine. The 5 speed transmission, chassis, brakes and suspension were all unchanged from the 246 SP. The 196 SP was introduced at Ferrari's 24 February 1962 press conference alongside the 248 SP, 286 SP, the 250 GTO and the 156 F1.
At the model's introduction in 1962, a single 196 SP chassis (s/n 0804) existed. By 1963 chassis 0790, 0802 and 0806 were converted to 196 SP specification, resulting in a total of four of this type made. Thanks to the 196 SP and driver Ludovico Scarfiotti, Ferrari claimed the 1962 European Hill Climb Championship in the Sports Cars class.
Scuderia Ferrari 196 SPs also claimed two 2,000 cc class wins at the 1962 and 1963 Targa Florio.
Specifications
The 2.0-litre V6 engine was mounted in the middle of the car, at its rear. The 60° angle engine was configured with only a single overhead camshaft and two valves per cylinder. Bore and stroke were respectively, and the resulting capacity was .
Those measurements were identical to those of the Dino 196 S engine, from which this engine was heavily derived. The power output was at 7500 rpm, thanks to three Weber 42DCN carburettors and a 9.8:1 compression ratio. The engine used a single spark plug with two ignition coils.
All SP series models introduced in 1962, including the first 196 SP, were initially fitted with Fantuzzi bodywork in the style of the later "long-nose" 246 SP bodies. This included the distinctive twin front air intakes first seen in 1961 and the low windscreen, slightly longer front, and lower rear bodywork that distinguished the later 1962 bodies from the original 1961 246 SP bodies.
Later in 1963, SP series cars raced by Scuderia Ferrari were converted to a single front air intake. Some 196 SPs have since been converted back to twin front intake bodywork.
286 SP
The Ferrari 286 SP was the second model to make its debut at the 1962 press conference and was similar to the 196 SP. Like the 196 SP and the revised 1962 246 SP, it had revised bodywork with a redesigned windscreen and tail to comply with new regulations. Only one example was produced, but never raced.
S/n 0802 was presented to the press in February and converted into the 268 SP by May, the same year. The 286 SP had no successor because the large-capacity V6 was soon discarded in favour of the new Chiti-designed V8 engines, that could deliver similar performance.
Specifications
The single overhead camshaft, 60° Dino V6 engine received a wider bore and longer stroke at respectively. The resulting total capacity was . Those measurements did not exist on any previous Dino-engined model.
A compression ratio of 9.5:1 combined with three Weber 42DCN carburettors helped produce a power output of at 6800 rpm. Also a single spark plug per cylinder with a single coil were used.
248 SP
The Ferrari 248 SP was the third new variation of the SP series introduced at the 1962 press conference. The 248 SP was fitted with a single overhead camshaft, 2.4-litre V8 engine, this time fed by four twin-choke Weber carburettors. It was the first fully Ferrari-developed 90° V8 engine, as the Ferrari 801 powerplant was Lancia-based.
Designed by Carlo Chiti as a replacement for the Dino V6, but the engine was only used in two models and did not bear any successors. Two examples were produced and both were subsequently modified to become larger displacement 268 SP models.
Specifications
The new tipo 199 V8 had a total capacity of from of bore and stroke. It was designed with a single overhead camshaft per cylinder bank configuration. The engine used four twin-choke Weber 40IF2C "Speciali" carburettors which mounted directly to the cylinder heads without manifolds.
The barrels of this unusual carburetor design were angled at 45°, resulting in a reduced overall height of the engine. Following testing, these were thought to inhibit induction and were replaced with more conventional Weber 40DC carburetors on the 268 SP. The 248 SP engine produced at 7400 rpm.
A single spark plug per cylinder and a single ignition coil were mounted. The compression ratio was 9.8:1.
Racing
The first V8-engined, SP-series car was created in 1962. The s/n 0798, was demonstrated at the start of season press conference by Ferrari in February and before April, not being involved in any racing, the engine was modified with a longer stroke to a 2.6-litre specification. The second Ferrari 248 SP, s/n 0806, was also created in 1962 but actually participated in racing.
It was entered by N.A.R.T. in the 12 Hours of Sebring, the same year. Bob Fulp with Peter Ryan arrived at the finish line on a thirteenth position overall and a third in class. After only a single race, by May 1962 the car was converted into the 268 SP.
268 SP
The Ferrari 268 SP was a derivative version of the 248 SP also fitted with a V8 engine. It featured a bigger displacement with a stroke increased to . The resulting capacity was 2.6 L, intended to be more competitive in the 3.0-litre Sport and Prototype classes. Only three examples existed, but all were converted from other models and only one (chassis 0798) remains in 268 SP configuration.
Specifications
The new tipo 202, updated V8 engine had of bore and stroke. The resulting capacity was now . The cylinder bore was unchanged from the 248 SP engine, with the increased capacity derived from a 2.5 mm longer crankshaft throw.
Weber 40DC carburetors mounted on individual manifolds replaced the 40IF2C carburetors used on the 248 SP, in an attempt to improve air induction. SOHC configuration and single ignition remained the same as on the 248 SP. The new engine also had the same (9.8:1) or slightly lower (9.6:1) compression ratio as on the 2.4-litre V8.
The power output rose to at 7000 rpm, only slightly more than the 286 SP could produce.
See also
Ferrari P Ferrari 333 SP, a 1994 sports prototype
External links
Ferrari 246 SP: Ferrari History Ferrari 196 SP: Ferrari History Ferrari 286 SP: Ferrari History Ferrari 248 SP: Ferrari History Ferrari 268 SP: Ferrari History
Text derived from https://en.wikipedia.org/w/index.php?oldid=1341519283 under CC BY-SA 4.0; modifications have been made.