FGC-9

Uses your system voice; voice and rate in settings.

Snapshot

≈ 7 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The FGC-9 is a physible, 3D-printable semi-automatic pistol caliber carbine, first released in early 20201. Based on the Shuty AP-9 by Derwood, the FGC-9 was designed and first manufactured by the German-Kurdish gun designer Jacob Duygu, under the pseudonym JStark1809. The gun was designed to not require any potentially regulated firearm parts (under European Union laws) in order to enable people in countries with restrictive gun control laws to manufacture it with little or no legal trouble. The weapon is a mix of fabricated 3D printed parts, easily manufactured metal pressure-bearing parts, and readily available springs, screws, nuts and bolts. The total cost of production, assuming the user already owns a 3D printer, is less than . The FGC-9 release was accompanied by thorough documentation to aid construction and assembly. The documentation has been translated into several other languages since it was first published. In April 2021, the MkII revision was released, with several updates designed to make the building process simpler. The files for the firearm's manufacture are available across the internet.

The FGC-9 is a physible, 3D-printable semi-automatic pistol caliber carbine, first released in early 2020. Based on the Shuty AP-9 by Derwood, the FGC-9 was designed and first manufactured by the German-Kurdish gun designer Jacob Duygu, under the pseudonym JStark1809. The gun was designed to not require any potentially regulated firearm parts (under European Union laws) in order to enable people in countries with restrictive gun control laws to manufacture it with little or no legal trouble. The weapon is a mix of fabricated 3D printed parts, easily manufactured metal pressure-bearing parts, and readily available springs, screws, nuts and bolts. The total cost of production, assuming the user already owns a 3D printer, is less than . The FGC-9 release was accompanied by thorough documentation to aid construction and assembly. The documentation has been translated into several other languages since it was first published. In April 2021, the MkII revision was released, with several updates designed to make the building process simpler. The files for the firearm's manufacture are available across the internet.

Etymology

The gun's name is an initialism for "Fuck Gun Control", with the "9" referencing its 9mm cartridge.

Origin

The FGC-9 was originally designed and manufactured between 2018 and 2020 by JStark1809, a pseudonymous German-Kurdish gun designer, with contributions from the "guerrilla 3D-gun file development group" Deterrence Dispensed, and was released on 27 March 2020 by Deterrence Dispensed and JStark1809. The core mechanical design elements are based on an earlier 3D printable design, the Shuty AP-9 pistol by Derwood, with a multitude of mechanical, ergonomic and constructive changes and improvements having been done to the AP-9 foundation. The "Shuty" relies on several factory-made or extensively machined gun parts (like the barrel) in order to be completed. This poses a challenge to would-be builders in jurisdictions that regulate and restrict such components or those without access to a machining workshop. The gun is also influenced by Philip Luty's SMG designs. The FGC-9 eliminates the need for factory-made gun parts or reliance on advanced fabrication skills of the maker. The FGC-9 is designed with Europeans in mind; fasteners and build materials use the metric standard and are available from hardware stores. The magazine can be 3D printed, and the entire design works without needing any regulated, commercial gun parts. The FGC-9's barrel can be completed in several ways, including the easily adopted method of electrochemical machining.

Mark II

An extensively updated design, the MkII was first announced on 23 October 2020 by En Bloc Press. Designer JStark1809 produced the MkII with help from designers "3socksandcrocs" and "Ivan the Troll". It was released on April 16, 2021 on DEFCAD and Odysee by user "The Gatalog". The updated weapon uses a H&K MP5 style charging handle, an improved electro-chemical machining process to make the barrel, and some ergonomic improvements as well. The release was the final package in a string of multiple smaller releases, which included the improved barrel ECMv2.0 process, and the Menendez Mag v2.0, and the Common Sense Fire Control Group AR-15 printable trigger, all created by Ivan The Troll in preparation for the FGC-9 MkII release.

Modifications

Due to the open-source nature of the FGC-9, there have been many packages released that alter the configuration, caliber, ergonomics, and other legally-restrictive qualities of the base-model firearm. These are all available through a wide variety of channels, all with different levels of testing, and allow the end user to customize their weapon as needed. One very common branch is replacing the buttstock with an ATF-approved pistol brace, in order for U.S. citizens to comply with NFA rifle and pistol requirements. Another common branch is replacing the barrel with a barrel in order to comply with U.S. minimum barrel length requirements, in addition to adding an extended handguard to replace the default one. The firearms hobbyist and instructor QueerArmorer created a version of the top rail for use in Myanmar by rebels fighting with limited access to optics in the Myanmar civil war, however its use was limited as another team from Deterrence Dispensed developed printable iron sights that allowed for more flexibility.

Materials

The upper and lower receivers of the FGC-9 are fully 3D-printed, as are its pistol grip and stock. Its magazine, based on the Glock magazine design, may also be printed. For the MkI, an AR-15 or modified airsoft trigger system is needed for the fire control. In the MkII release, the developers released a package to 3D-print the AR-15 trigger. The barrel can be rifled polygonally through electrochemical machining. Some designers have estimated the tooling to complete the FGC-9, including the price of the printer (~$200) and electrochemical machining equipment (~$100), at $500. JStark1809 himself estimated the project to take 1.5 to 2 weeks to build.

Availability

The gun's 3D-printing files were released under an open-source license on DEFCAD by JStark1809, and then uploaded to various hosting platforms by Deterrence Dispensed such as Odysee, a free-speech blockchain based video, audio and file hosting site using the LBRY protocol. According to Rajan Basra, a professor at International Centre for the Study of Radicalisation at King's College London, the FGC is particularly popular among far-right groups due to the sharing of its instructions in extremist internet forums.

See also

Code as speech List of notable 3D printed weapons and parts Privately made firearm Liberator gun

References

External links

FGC-9 on Odysee FGC-9 MKII on Odysee FGC-9 MKII Stingray on Odysee

Text derived from https://en.wikipedia.org/w/index.php?oldid=1362805901 under CC BY-SA 4.0; modifications have been made.

References

2 claims could not be tied to a specific sentence and are listed in the table below instead.

  1. ↩Wikipedia “FGC-9” revision 1362805901 · retrieved 2026-10-20 release date (×1) · confidence 0.95 revision URL