Lesson plan
Firmware
or Flash memory, which makes use of an I/O protocol such as SPI. In computing, firmware (FW) is software that provides low-level control of computer hardware. For a relatively simple device, firmware may perform all control, monitoring and data manipulation functionality. For a more complex device, firmware may provide only relatively low-level control as well as hardware abstraction to higher-level software such as an operating system. Firmware is found in a wide range of computing devices, including personal computers, smartphones, home appliances, vehicles, computer peripherals and in many of the integrated circuits inside each of these larger systems. It can be found, for instance, in the microcontroller of a computer keyboard. Firmware is stored in non-volatile memory either read-only memory (ROM) or programmable memory such as EPROM, EEPROM, or flash. Changing a device's firmware stored in ROM requires physically replacing the memory chip or the device itself. Programmable firmware memory can be reprogrammed via a procedure sometimes called flashing. Common reasons for changing firmware include fixing bugs and adding features.
Article summary
or Flash memory, which makes use of an I/O protocol such as SPI. In computing, firmware (FW) is software that provides low-level control of computer hardware. For a relatively simple device, firmware may perform all control, monitoring and data manipulation functionality. For a more complex device, firmware may provide only relatively low-level control as well as hardware abstraction to higher-level software such as an operating system. Firmware is found in a wide range of computing devices, including personal computers, smartphones, home appliances, vehicles, computer peripherals and in many of the integrated circuits inside each of these larger systems. It can be found, for instance, in the microcontroller of a computer keyboard. Firmware is stored in non-volatile memory either read-only memory (ROM) or programmable memory such as EPROM, EEPROM, or flash. Changing a device's firmware stored in ROM requires physically replacing the memory chip or the device itself. Programmable firmware memory can be reprogrammed via a procedure sometimes called flashing. Common reasons for changing firmware include fixing bugs and adding features.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.