Lesson plan

Flapback

Flapback or blowback is the tilting of a helicopter rotor disc, usually aft (backwards), which occurs in several circumstances. In normal operating circumstances, forward flight results in flapback caused by dissymmetry of lift and the transverse flow effect. Dissymmetry of lift is where the forward-moving rotor blade has a faster airspeed, so it generates more lift, which would cause the rotor disc to tilt to the side. To prevent this the forward-moving blade flaps up, which reduces its angle of attack and the corresponding lift. At the same time, the rearward-moving rotor blade flaps down thereby increasing its angle of attack and lift. Thus, lift is balanced on both sides of the rotor disc. However, since the rotor blades climb on the advancing side and descend on the opposite side, this also results in the rotor disk being tilted to the rear. The transverse flow effect is where the front of the rotor disc is moving into undisturbed air, whereas the rear of the rotor disc is moving into downward-moving air. The front of the rotor disc therefore has a higher angle of attack, and generates more lift, causing flapback. As airspeed increases, the pilot must counter flapback by applying forward input to the cyclic control. During forward flight, if a gust of wind affects the helicopter from the front, increased flapback will decrease the forward speed of the helicopter.…

Back to article

Article summary

Flapback or blowback is the tilting of a helicopter rotor disc, usually aft (backwards), which occurs in several circumstances. In normal operating circumstances, forward flight results in flapback caused by dissymmetry of lift and the transverse flow effect. Dissymmetry of lift is where the forward-moving rotor blade has a faster airspeed, so it generates more lift, which would cause the rotor disc to tilt to the side. To prevent this the forward-moving blade flaps up, which reduces its angle of attack and the corresponding lift. At the same time, the rearward-moving rotor blade flaps down thereby increasing its angle of attack and lift. Thus, lift is balanced on both sides of the rotor disc. However, since the rotor blades climb on the advancing side and descend on the opposite side, this also results in the rotor disk being tilted to the rear. The transverse flow effect is where the front of the rotor disc is moving into undisturbed air, whereas the rear of the rotor disc is moving into downward-moving air. The front of the rotor disc therefore has a higher angle of attack, and generates more lift, causing flapback. As airspeed increases, the pilot must counter flapback by applying forward input to the cyclic control. During forward flight, if a gust of wind affects the helicopter from the front, increased flapback will decrease the forward speed of the helicopter.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.