Lesson plan

Flapper locking

Flapper locking is a type of locking mechanism used in firearms. It involves a pair of flappers on the sides of the bolt that each lock into an outwards recess in the receiver as the bolt is in battery. As the bolt is forced backwards after the firing of a cartridge, the flappers recede back into the bolt, therefore unlocking and sending the bolt backwards to cycle the gun. The design was patented in 1870 by Lieutenant Friberg of the Swedish Army, but the first actual example of a firearm that used this was made by another Swedish man named Kjellman in 1907. Most use of flapper locking came from the designs of the Soviet Union's Vasily Degtyaryov in the years surrounding World War II.

Back to article

Article summary

Flapper locking is a type of locking mechanism used in firearms. It involves a pair of flappers on the sides of the bolt that each lock into an outwards recess in the receiver as the bolt is in battery. As the bolt is forced backwards after the firing of a cartridge, the flappers recede back into the bolt, therefore unlocking and sending the bolt backwards to cycle the gun. The design was patented in 1870 by Lieutenant Friberg of the Swedish Army, but the first actual example of a firearm that used this was made by another Swedish man named Kjellman in 1907. Most use of flapper locking came from the designs of the Soviet Union's Vasily Degtyaryov in the years surrounding World War II.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.