Lesson plan

Flash point

with a flash point lower than room temperature. The flash point of a material is the lowest temperature at which a liquid gives off enough vapor so that it will ignite in the presence of an ignition source. This is different from the fire point, which is the lowest temperature at which the vapors keep burning after the ignition source is removed. The fire point is higher than the flash point, because at the flash point the rate at which the vapor is produced is not sufficient to sustain combustion. The flash point is also sometimes confused with the autoignition temperature, the temperature that causes spontaneous ignition. Neither flash point nor fire point depends directly on the ignition source temperature, but ignition source temperature is far higher than either the flash or fire point, and can increase the temperature of fuel above the usual ambient temperature to facilitate ignition.

Back to article

Article summary

with a flash point lower than room temperature. The flash point of a material is the lowest temperature at which a liquid gives off enough vapor so that it will ignite in the presence of an ignition source. This is different from the fire point, which is the lowest temperature at which the vapors keep burning after the ignition source is removed. The fire point is higher than the flash point, because at the flash point the rate at which the vapor is produced is not sufficient to sustain combustion. The flash point is also sometimes confused with the autoignition temperature, the temperature that causes spontaneous ignition. Neither flash point nor fire point depends directly on the ignition source temperature, but ignition source temperature is far higher than either the flash or fire point, and can increase the temperature of fuel above the usual ambient temperature to facilitate ignition.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.