---
title: Flat-six engine
slug: flat-six-engine
qid: 
snapshot: enwiki-001322053814
content_hash: 
license: CC BY-SA 4.0
source: https://en.wikipedia.org/w/index.php?oldid=1322053814
tags: [23603337, 24556790, 26220375, 28075870, 28342151]
---

# Flat-six engine

> [!note] Provenance
> Snapshot `enwiki-001322053814` · content root `…`
> Derived from <https://en.wikipedia.org/w/index.php?oldid=1322053814> · Licensed CC BY-SA 4.0

air-cooled aircraft engine A flat-six engine (also known as a horizontally opposed-six engine) is a six-cylinder piston engine with three cylinders on each side of a central crankshaft. The most common type of flat-six engine is the boxer-six engine, where each pair of opposed cylinders moves inwards and outwards at the same time. An alternative configuration for flat engines is a 180-degree V engine, where both cylinders move to the right then the left at the same time. The advantages of the flat-six layout are good engine balance (for reduced vibration), a low center of gravity, short length (compared with an inline-six engine) and being well suited to air-cooling. The disadvantages are a large width (which can limit the maximum steering angle when used in a front-engined car), a large intake manifold being required when a central carburetor is used, and duplication of the inlet and outlet connections for water-cooled engines. The first production flat-six engine was in the 1904 Wilson-Pilcher 18/24 HP car. The most notable use of flat-six engines is the Porsche 911 sports car, which has used flat-six engines continuously since 1963. Several other car manufacturers, including Subaru, have produced flat-six engines at times. Flat-six engines have also occasionally been used in motorcycles, and commonly in general aviation aircraft, along with the flat-four engine.

air-cooled aircraft engine]] A flat-six engine (also known as a horizontally opposed-six engine) is a six-cylinder piston engine with three cylinders on each side of a central crankshaft. The most common type of flat-six engine is the boxer-six engine, where each pair of opposed cylinders moves inwards and outwards at the same time. An alternative configuration for flat engines is a 180-degree V engine, where both cylinders move to the right then the left at the same time. The advantages of the flat-six layout are good engine balance (for reduced vibration), a low center of gravity, short length (compared with an inline-six engine) and being well suited to air-cooling. The disadvantages are a large width (which can limit the maximum steering angle when used in a front-engined car), a large intake manifold being required when a central carburetor is used, and duplication of the inlet and outlet connections for water-cooled engines. The first production flat-six engine was in the 1904 Wilson-Pilcher 18/24 HP car. The most notable use of flat-six engines is the Porsche 911 sports car, which has used flat-six engines continuously since 1963. Several other car manufacturers, including Subaru, have produced flat-six engines at times. Flat-six engines have also occasionally been used in motorcycles, and commonly in general aviation aircraft, along with the flat-four engine. ==References==
