Lesson plan

Flat-ten engine

A flat-ten engine (also known as a horizontally opposed-ten) is a ten-cylinder piston engine with five cylinders on each side of a central crankshaft. There are no known flat-ten engines which reached production. In the early 1960s, Chevrolet built several prototype flat-ten engines as part of an aborted program for family of Modular Engines to replace the Chevrolet Turbo-Air 6 flat-six engine. This development program investigated flat engines with between two and twelve cylinders, with the flat-ten version being known as "P-10" ("pancake" engine). Although the program was initially intended to develop an engine for the 1964 Chevrolet Corvair (which is rear-engined with rear-wheel drive), the flat-ten version was fitted to an experimental 1962 Chevrolet Impala (a front-engined car which was converted to front-wheel drive).

Back to article

Article summary

A flat-ten engine (also known as a horizontally opposed-ten) is a ten-cylinder piston engine with five cylinders on each side of a central crankshaft. There are no known flat-ten engines which reached production. In the early 1960s, Chevrolet built several prototype flat-ten engines as part of an aborted program for family of Modular Engines to replace the Chevrolet Turbo-Air 6 flat-six engine. This development program investigated flat engines with between two and twelve cylinders, with the flat-ten version being known as "P-10" ("pancake" engine). Although the program was initially intended to develop an engine for the 1964 Chevrolet Corvair (which is rear-engined with rear-wheel drive), the flat-ten version was fitted to an experimental 1962 Chevrolet Impala (a front-engined car which was converted to front-wheel drive).

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.