Lesson plan
Flat-twin engine
80 Plus motorcycle engine (circa 1950) A flat-twin engine is a two-cylinder internal combustion engine with the cylinders on opposite sides of the crankshaft. The most common type of flat-twin engine is the boxer-twin engine, where both pistons move inwards and outwards at the same time. The flat-twin design was patented by Karl Benz in 1896 and the first production flat-twin engine was used in the Lanchester 8 hp Phaeton car released in 1900. The flat-twin engine was used in several other cars since, however a more common usage is in motorcycles; early models oriented the cylinders in line with the frame, however later models switched to the cylinders being perpendicular to the frame to provide even cooling across both cylinders. Flat-twin engines were also used in several aircraft up until the 1930s and in various stationary applications from the 1930s to the 1960s. The Australian lawnmower manufacturer Victa also produced a flat-twin engine push mower from August 1975 to 1980 dubbed the ‘Twin 500’, and later the ‘Supreme’. These engines were manufactured in Canada. They are very sought after as only small numbers were produced, most likely due to ignition- and fuel-related problems in early models. In the Supreme (the later model) all these problems were fixed with a rear-domed piston, crankcase mixers and refined ignition system .
Article summary
80 Plus motorcycle engine (circa 1950) A flat-twin engine is a two-cylinder internal combustion engine with the cylinders on opposite sides of the crankshaft. The most common type of flat-twin engine is the boxer-twin engine, where both pistons move inwards and outwards at the same time. The flat-twin design was patented by Karl Benz in 1896 and the first production flat-twin engine was used in the Lanchester 8 hp Phaeton car released in 1900. The flat-twin engine was used in several other cars since, however a more common usage is in motorcycles; early models oriented the cylinders in line with the frame, however later models switched to the cylinders being perpendicular to the frame to provide even cooling across both cylinders. Flat-twin engines were also used in several aircraft up until the 1930s and in various stationary applications from the 1930s to the 1960s. The Australian lawnmower manufacturer Victa also produced a flat-twin engine push mower from August 1975 to 1980 dubbed the ‘Twin 500’, and later the ‘Supreme’. These engines were manufactured in Canada. They are very sought after as only small numbers were produced, most likely due to ignition- and fuel-related problems in early models. In the Supreme (the later model) all these problems were fixed with a rear-domed piston, crankcase mixers and refined ignition system .
Key claims
- release date: 1900 — source: Wikipedia, revision 1323553330, retrieved 2026-10-20 · confidence 0.95
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- The record states that the release date is "1900". What evidence would count against this claim?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
- Wikipedia, “Flat-twin engine”, revision 1323553330, retrieved 2026-10-20 https://en.wikipedia.org/w/index.php?oldid=1323553330
Key claims and bibliography are generated from the same tracked claims and sources as the article page.