Flexural strength
≈ 4 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Flexural strength, also known as modulus of rupture, bend strength, or transverse rupture strength, is a material property defined as the maximum stress at the outer surface of a specimen at the moment of failure (fracture or yielding) in a bending test. The transverse bending test is most frequently employed, in which a specimen having either a circular or rectangular cross-section is bent until fracture or yielding using a three-point flexural test technique. The flexural strength represents the highest stress experienced within the material at its moment of yield. It is measured in terms of stress, here given the symbol \sigma .
Flexural strength, also known as modulus of rupture, bend strength, or transverse rupture strength, is a material property defined as the maximum stress at the outer surface of a specimen at the moment of failure (fracture or yielding) in a bending test. The transverse bending test is most frequently employed, in which a specimen having either a circular or rectangular cross-section is bent until fracture or yielding using a three-point flexural test technique. The flexural strength represents the highest stress experienced within the material at its moment of yield. It is measured in terms of stress, here given the symbol \sigma . \sigma = \frac{F}{bd} This stress is not the true stress, since the cross section of the sample is considered to be invariable (engineering stress). F is the axial load (force) at the fracture point b is width d is the depth or thickness of the material The resulting stress for a rectangular sample under a load in a three-point bending setup (Fig. 3) is given by the formula below (see "Measuring flexural strength"). The equation of these two stresses (failure) yields: \sigma = \frac{3FL}{2bd^2} Typically, L (length of the support span) is much larger than d, so the fraction \frac{3L}{2d} is larger than one. \sigma = \frac{Mc}{I} M is the moment in the beam c is the maximum distance from the neutral axis to the outermost fiber in the bending plane I is the second moment of area For a simple supported beam as shown in Fig. 3, assuming the load is centered between the supports, the maximum moment is at the center and is equal to: M = P \times r = \left ( \frac{F}{2} \right )\times \left ( \frac{L}{2} \right ) = \frac{FL}{4} For a rectangular cross section, c = \frac{1}{2} d (central axis to the outermost fiber of the rectangle) I = \frac{1}{12}bd^3 (Second moment of area for a rectangle) Combining these terms together in the classical bending stress equation: \sigma = Mc\left ( \frac{1}{I} \right ) = \left ( \frac{FL}{4} \right ) \left ( \frac{d}{2} \right ) \left ( \frac{12}{bd^3} \right ) \sigma = \frac{3FL}{2bd^2} F is the load (force) at the fracture point (N) L is the length of the support span b is width d is thickness For a rectangular sample under a load in a four-point bending setup where the loading span is one-third of the support span: \sigma = \frac{FL}{bd^2} F is the load (force) at the fracture point L is the length of the support (outer) span b is width d is thickness For the 4 pt bend setup, if the loading span is 1/2 of the support span (i.e. L i = 1/2 L in Fig. 4): \sigma = \frac{3FL}{4bd^2} If the loading span is neither 1/3 nor 1/2 the support span for the 4 pt bend setup (Fig. 4): \sigma = \frac{3F(L-L_i)}{2bd^2} L i is the length of the loading (inner) span
Text derived from https://en.wikipedia.org/w/index.php?oldid=1378579516 under CC BY-SA 4.0; modifications have been made.