Float chamber

, showing the float (4) and valve (5).

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

  • Machine translation, like DeepL or Google Translate, is a useful starting point for translations, but translators must follow the LLM translation guideline, revise errors as necessary and confirm that the translation is accurate, rather than simply copy-pasting machine-translated text into the English Wikipedia.
  • Consider adding a topic to this template: there are already 2,334 articles in the main category, and specifying|topic= will aid in categorization.
  • Do not translate text that appears unreliable or low-quality. If possible, verify the text with references provided in the foreign-language article.
  • You must provide copyright attribution in the edit summary accompanying your translation by providing an interlanguage link to the source of your translation. A model attribution edit summary is Content in this edit is translated from the existing German Wikipedia article at [[:de:Schwimmerkammer]]; see its history for attribution.
  • You may also add the template {{Translated|de|Schwimmerkammer}} to the talk page.
  • For more guidance, see Wikipedia:Translation.

A float chamber[1] is a device for automatically regulating the supply of a liquid to a system. It is most typically found in the carburettor of an internal combustion engine, where it automatically meters the fuel supply to the engine. However, this arrangement is found in many automatic liquid systems, for example the cistern of most toilets could be said to be a type of float chamber.

A float chamber works by allowing liquid within the chamber to lift a float which is linked to a valve which regulates the liquid intake. When the level is low, the float drops and opens the valve, allowing in liquid until the float rises sufficiently to close off the valve again. This is identical in principle to the ballcock valve.

Carburetors

edit edit source

Carburetors are provided with a float chamber to provide a constant hydrostatic head of fuel above the carburettor's metering jets, thus a constant pressure. The float chamber itself does not vary the pressure according to demand, but it does vary the supply flowrate with demand, to keep this pressure constant.

The valve is often described as a needle valve, although this is a misnomer. A true needle valve uses a tapered needle in a tapered seat, so as to provide fine control over flow rate. The float valve uses a pointed needle against a square-edged seat, to give a positive shut-off.

As the float relies on gravity, the chamber must be mounted vertically. Some designs, such as the SU, may allow a separate float chamber body to be adjusted relative to the carburettor to compensate for this. Acceleration effects may also apply a forwards force on the float and so the float hinges often have to be mounted across the car to avoid surging. Some designs, such as the Stromberg use wide, shallow floats to reduce surging.

One drawback of the basic type of float chamber described is that it only operates correctly when it is the right way up, so more sophisticated solutions are needed in aircraft.

See also

edit edit source

References

edit edit source
  1. ^ "Aisan carburetor Float System". carburetor-parts.com. Retrieved 3 October 2025. Wikipedia revision 1314896608, retrieved 2026-11-18

Text derived from https://en.wikipedia.org/w/index.php?oldid=1314896608 under CC BY-SA 4.0; modifications have been made.